• Radiation Oncology Journal
• /
• v.27 no.3
• /
• pp.133-139
• /
• 2009

Purpose: This study was designed to analyze the outcome and toxicity of thoracic radiation therapy (TRT) and chemotherapy for patients who suffer with limited-stage small-cell lung cancer (LS-SCLC). Materials and Methods: We retrospectively studied 35 patients with LS-SCLC. TRT was administered once daily (1.8 to 2 Gy per fraction) and it was directed to the primary tumor for a total 50 to 66 Gy in 6 to 7 weeks. The patients received four cycles of etoposide plus cisplatin. TRT was begun on day 1 of the first cycle of chemotherapy in the concurrent arm and after the fourth cycle in the sequential arm. Results: The median progression-free survival time was 16.5 months (95% confidence interval [CI], 9.0 to 24.1 months) for the sequential arm, and 26.3 months (95% CI, 16.6 to 35.9 months) for the concurrent arm. The 2-year progression-free survival rate was 16.0 percent for the sequential arm and 50.0 percent for the concurrent arm (p=0.0950 by log-rank test). Leukopenia was more severe and more frequent in the concurrent arm than in the sequential arm. However, severe esophagitis was infrequent in both arms. The radiotherapy was interrupted more frequently in the concurrent arm than in the sequential arm due to hematologic toxicities (p=0.001). Conclusion: This study suggests that concurrent TRT with etoposide plus cisplatin is more effective for the treatment of LS-SCLC than sequential TRT. However, there is a significant increase in the risk of toxicities, and radiotherapy was frequently interrupted in the concurrent arm due to hematologic toxicities.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.3
• /
• pp.493-504
• /
• 1997

Background : Non-small cell lung cancer is one of the most frequent cause of death due to cancer in men, and its incidence among women is rapidly increasing. Although there has been a recent surge of interest in combined modality therapy for stageIII non-small cell lung cancer(NSCLC), the optimal treatment is still not well established. Thoracic irradiation has long been the gold standard for locally advanced unresectable NSCLC. However, although conventional radiotherapy(XRT) can palliate symptom and improve local control of disease, it has at most only a modest effect on survival. Recently, cisplatin(cis-diamminedichloroplatinum) has been reported to enhance the cell-killing effect of radiation For patients with unresectable NSCLC, cisplatin-based concurrent chemoradiotherapy(CCRT) had the advantage of therapeutic response over XRT alone and therapeutic side effect more commonly occurred in CCRT group in EORTC(European Organization for Research and Treatment of Cancer) and other trials. Objectives : We compared therapeutic response, compliance, and side effects between CCRT and XRT in patients with advanced NSCLC. Patients and Method : Thirty patients with biopsy-proven inoperable NSCLC were randomized to one of two treatment arms. Arm A consisted of XRT, radiotherapy for 4~6 weeks(1.8 Gy given 20~33 times, in five fractions a week), and arm B consisted of CCRT, radiotherapy for 2 weeks(3 Gy given to times, in five fractions a week), followed by 3 week rest period and then radiotherapy 2 more weeks(2.5 Gy given 10 times, in five fractions a week), combined with 6mg cisplatin per square meter, given daily before radiotherapy. We evaluate therapeutic response, compliance, change of performance status, side effects, and radiation pneumonitis by using the author's made scoring system. Results : There was no significant difference in therapeutic response and compliance. But there was a significantly lower laboratory complication and radiation pneumonitis in CCRT group (p < 0.05). There's significant negative correlation between stage and therapeutic response score in both groups(R=0.353, p < 0.05) In both groups, patients with squamous cell carcinoma had a tendency to higher therapeutic response score than those with adenocarcinoma. Conclusion : There was no difference between CCRT and XRT in respect to therapeutic response and compliance. But CCRT had a advantage of decreased side effects.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.648-655
• /
• 2020

The firing pin of modern automatic rifles detonates the primer of loaded ammunition via a hammer. During this process, the firing pin receives an impact load and repetitive force throughout the life of the rifle. An endurance test of a rifle showed that the firing pin breaks prematurely at 96.26% of life. Accordingly, a case study was conducted through cause analysis and a reconstruction test. Optical microscopy and scanning electron microscopy of the broken surface of the firing pin showed that a crack began in the circumferential direction of the surface, resulting in a fatigue crack to the core after repeated impact. Crack growth and fatigue destruction occurred at the end due to the repetitive impact and was estimated using a notch. For verification, a sample that produced a 0.03mm circumferential notch was broken at 64.25% of life in the reconstruction test. A test of breakage according to the notch types showed that a 0.3mm and a 0.5mm one-side notch were broken at 66.53% and 50.76%, respectively, and a 0.03mm six-point notch was broken at 85.65%. The endurance life of a sample firing pin with a rough surface and tool mark was examined, but an approximately 381 ㎛ internal crack formed. Through this study, failure for each notch type was considered. These results show that quality control of the notch and surface roughness is essential for ensuring the reliability of a component subjected to repeated impact.

• Journal of the Korean Society of Costume
• /
• v.22
• /
• pp.205-224
• /
• 1994

It was aimed to study the costume of Koryo dynasty based upon the thirty pictures of Bud-dha to hang on the wall among the existing Buddist paintings. The costume to study were made about 64 years during the King Chung-yol(1286) to the King Chung-jong(1350) which style was mostly related in Won Dynasty. 가) Men's wear ; 1. Hair style and hair dress ; Man tied up a top knot and they put on the hat such as a Kuan Kun and Mo. The young boys binds his hair up one, two, and three knot-s, and tied up with a hair ribbon, A kinds of Kuan-mo were Mine-lu-kuan Yuan-yu-kuan, Nong-kuan, Hae-chi-kuan Pok-du Yun-wha-kuan Yip-mo- and Tu-ku(Helmeto) 2. clothes ; 1) Colour of Koryo King's Mien-ku Kuan costume was not agree with blue and reddish black colour which was used in Yo, Song, Kum and Won Dynasty, however black and greenhish blue colour was agreed with. 2) The king wore T'ung-t'ien-kuan(Yuan-yu-kuan) and the government officials wore Chin-hien-kuan Hae-chi-kuan and Nong-kuan as a court dress. In general the king and the Crown Prince wore a hats which was used in T'ung-t'ien system however sometimes they wore small hats which was cited in literature. 3) Gate guard and upper garment wore colourful costume figured gold colour pattern which was distin-gtive costume system of Koryo. 4) A monk wore big sleeve long skirt big sleeve long jacket long skirt and shoulder scar-f full shoulder scarf or right hand shoulder opened scarf. 5) The Soldiers wore helmet shoulder or scarf pee-back hung-kap, pok-kap, yang-dan-g-kap we-yu-kap kun-kap, and boots and they carried arms. 6) The young boys wore scarf, loin cloth, long skirt, belt neckless, wan-silk, boots and foots wear and wristless. 나) Women's wear ; 1. Hair style and hairs and tied up with a hair ribbon and wore precious ston decorated hair dress wheel shape hair dress pan shaped head dress handkerchif covered hair dress decorated precious stone hair pin silk chippon made of head dress muf-fler shaped hairdress. Boots mocasin hae lee, suk and sandle wored as a shoes depends on the classes. They wore neckless, earing wres-tless and wan-pu-sik. 2. Closthe 1) High rank lade's wore un-kyun attached jacket and jacket sleeves decorated pleats and pleats decorated long skirt apron back apron knot belt, scarf this type is the same with Dang Dynasty five dynasty of china Song, Kum Won, Myung Dynasty and our cos-tume of Poe-hae, and Shilla Dynasty.

• Archives of Plastic Surgery
• /
• v.37 no.4
• /
• pp.415-420
• /
• 2010

Purpose: Heterotopic calcification is a pathological event in which deposits of calcium salts build up, usually in the joint area or soft tissues. It can occur under many conditions and in some rare cases may develop in burn scars. In particular, ulcerations in burn scars accompanied by heterotopic calcification are difficult to treat through conservative treatment. This study reports methods for accurate diagnosis and adequate treatment of ulceration in burn scars accompanied by heterotopic calcification. Methods: Fourteen patients who visited our hospital from March 2008 to January 2010 were subjected to this study. Their sex, age, modes of burn, degree, TBSA (%), ulcerated area, the time of occurrence of the ulcerations in the burn scars were investigated. In addition, radiological examination and biopsy was performed to diagnose heterotopic calcification. Results: Among the 14 cases, 6 were male and 8 were female. The average age of the patients was 48.2 (27 - 69 yrs). As for the mode of burn, 11 were flame burns and 3 were scalding burns. The average time of occurrence of the ulcerations in the burn scars was 4.5 months. The ulcerated areas were situated in the legs in 12 cases, arms in 1 case, and torso in 1 case. The diagnosis was confirmed through X-ray and biopsy, and skin graft was performed after wide excision. Conclusion: Diagnosis of the ulceration in burn scars accompanied by heterotopic calcification is possible through radiological and pathologic studies. Surgical treatment is the most reliable method of treatment, and we chose to perform skin graft after wide excision. Also, we learned that the complete removal of the calcified tissue and the inflammatory fibrotic tissues is crucial in preventing recurrence. Also, in contrast to Marjolin's ulcer, heterotopic calcification had a small size, little or no granulation tissue, and lacked fungating type ulceration. Therefore, favorable prognosis could be achieved through adequate treatment.

• Journal of Genetic Medicine
• /
• v.7 no.2
• /
• pp.145-150
• /
• 2010

Acrodysostosis is an extremely rare disorder characterized by short fingers and toes with peripheral dysostosis, nasal hypoplasia, and mental retardation. We report a 16-year-old Korean boy with acrodysostosis who had characteristic clinical features and cervical spine stenosis manifested by neurologic symptoms. On presentation, he complained of difficulty in raising his arms, and suffered from intermittent pain and weakness in both upper extremities. He had short stature and dysmorphic facial features, including a broad, depressed nasal bridge, small, upturned nose, bilateral epicanthal folds, and mild hypertelorism. Moderate mental retardation and sensorineural hearing loss in both ears were also present. Radiological findings included broad, short metacarpals and phalanges with cone-shaped epiphyses, bilateral Madelung deformities, hypertrophied first metatarsals, and thickening of the calvarium. Magnetic resonance imaging findings included stenosis of the cervical spine, platybasia with compression into the cervicomedullary junction, and downward displacement of the cerebellar tonsils. Here, we report a case of acrodysostosis with symptoms and signs of cervical spinal stenosis first in Korea. If it is diagnosed in the early stages, possible life-threatening complications, including spinal canal stenosis, can be managed properly and permanent neurologic sequelae might be avoided. Therefore, it is important to consider acrodysostosis in the differential diagnosis of peripheral dysostosis.

• Korean Journal of Optics and Photonics
• /
• v.17 no.5
• /
• pp.469-474
• /
• 2006

A $1{\times}16$ thermo-optic switch with small excess loss using multimode interference(MMI) couplers is designed, fabricated, and measured. This paper introduces the proposed $1{\times}16$ thermo-optic switch, and discusses the measurement results. The $1{\times}16$ thermo-optic switch is farmed as 4-stage which consists of 15 unit devices. The unit devices are the $2{\times}2$ thermo-optic switches with Mach-Zehnder interferometer(MZI) structure. The characteristics of the $1{\times}16$ thermo-optic switch depends strongly on each unit device. The unit deviceconsists of two 3-dB general interference MMI couplers and two single mode waveguide arms as a phase shifter. First of all, the 3-dB optical splitter and $2{\times}2$ MZI thermo-optic switch have been tested to confirm the characteristics of the unit devices of the $1{\times}16$ MZI thermo-optic switch. Using the measurement results of the unit devices, the $1{\times}16$ MZI thermo-optic switch can be produced with better characteristics. The resultant structure of the MMI coupler with the optical light source of wavelength of 1550nm for the $1{\times}16$ thermo-optic switch is that the width and the optimized length are $25{\mu}m\;and\;1580{\mu}m$, respectively. The smallest excess loss fur the unit device is -0.5dB and the average excess loss is -0.7dB.

• Korean Journal of Optics and Photonics
• /
• v.28 no.5
• /
• pp.213-220
• /
• 2017

This paper proposes how to fabricate an educational Mach-Zehnder interferometer that is easy to align and inexpensive, using 3D printers and semiconductor lasers. The interferometer consists of a body $165mm{\times}120mm{\times}57mm$ in size, mirror mounts, a laser holder, beam splitters, and so on. The laser path is adjusted by 4 mirror mounts, each comprised of rubber bands, small metal wires, and a screw. The interference fringe is enlarged by the lens at the final stage. The refractive index of a slide glass was measured by counting the number of moving interference fringes while the slide glass, inserted into one of the two interferometer arms, is rotating. The formula for the refractive index as a function of the optical-path difference and rotation angle was obtained, and used to calculate the refractive index of glass from the interferometer experiment. The use of a rotating glass in one arm of the interferometer nullifies the need for a precision stage, which despite its high cost is often required to observe the moving interference fringe in the classroom. Therefore, the 3D-printed Mach-Zehnder interferometer proposed in this paper can be very useful for education, because of its affordability and performance. It enables students to perform both qualitative and quantitative studies using a 3D-printed interferometer, such as measuring the refractive index of a glass sample, and the wavelength of light.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.47-53
• /
• 2018

Various types of robotic arms are being used for industrial purposes, particularly with the small production of multi-products, and the importance of the gripper, which can be used in industrial fields, is increasing. This study evaluated a variable stiffness mechanism gripper that can change the stiffness using the nonlinearity of a flexible material. A prototype of the gripper was fabricated and examined to confirm the change in stiffness. The previous gripper was unable to grip objects in some situations with three variable stiffness mechanism. In addition, these mechanisms were not balanced and rarely rotated when the object was gripped. Therefore, a new type of gripper was needed to solve this problem. Inspired by the movements of the human palm and Venus Flytrap, a new type of a variable stiffness soft robot hand was designed. The possibility of grasping could be increased by interlocking the palm folding mechanism by pulling the tendon attached to the variable stiffness mechanism. The soft robotic hand was used to grasp objects of various shapes and weights more stably than the previous variable stiffness mechanism gripper. This new variable stiffness soft robot hand can be used selectively depending on the application and environment to be used.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.11
• /
• pp.53-60
• /
• 2009

This paper is focusing on the optimal size of internal space in which various functions are expressed by means of analogizing appropriate size of passage fitted to characters and reverse-calculating it in comparison with preexisting games, and thus increase the objectivity of data. To this end, the work of making the data objective was conducted in advance, and the experiment proceeded in the way that specially-designed Dungeon can make its way through the passage and in the situation where small-scale combats take place. In addition, the efforts were made to standardize the outcome of experiments by restricting the types of game graphics to MMO RPG. Further, the enhance the objectivity of size of the characters, the game types were limited to RPG games, and it is also adjusted to the character's face size based on the graphic designer's preference. The size of shoulders and arms of characters, inter alia, was selected as distinguishing points to be adjusted to the passage. By analyzing these data, the size of passage was re-organized according to the main characters in the MMO RPG games. Four experimental data was utilized by the 200 game experts in order to select the optimal size of passage in the game. As a consequence, the proportional correlation between character and passage movement was evaluated as successful in terms of emotional recognition.