• 한국자동차공학회논문집
• /
• 제14권4호
• /
• pp.192-198
• /
• 2006

The real-time simulator of a turning-type sluice gate actuated by the hydraulic cylinders is developed using a PC and a visual C++ program language. The real-time simulator receives the directional control valve signal selected by the operator using the mouse, updates the state variables of the turning-type sluice gate system responding to the control signal, and draws the moving figures of the sluice gate, cylinder, reserved water every drawing time on the PC monitor. Also, the operator can observe the sluice gate angle, cylinder force, cylinder pressures, and hydraulic power representing the operation of sluice gate system through the PC monitor every drawing time. The simulator can be a very useful tool to design and improve the turning-type sluice gate system.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2001년도 정기학술대회
• /
• pp.91-97
• /
• 2001

These Study are for the development of the reliability assessment test code and test equipment and test procedures of the heavy sluice gate hydraulic cylinder. Because there is no reliability test code for the heavy sluice gate hydraulic cylinder inside and outside of the country, the modified reliability test code is made reference for the related existing standards like as ISO, JIS, MIL, TUV, DIN, KS and etc. In this study, the novel method is proposed to evaluate efficiency of the heavy sluice gate hydraulic cylinder on the loading conditions and established the conditions of the acceleration life test to reduce the testing time and cycles. The testing equipments for life test, lode operating test, high and low temperature test and salt spray test have been established for 8 month, and the reliability tests are accomplished. The test results of the heavy sluice gate hydraulic cylinder which is produced and tested initially in Korea are satisfied the durability life cycle on the using conditions.

• 한국자동차공학회논문집
• /
• 제13권6호
• /
• pp.170-176
• /
• 2005

The hydraulic cylinder is used for actuating the sluice gate which controls the volume of water in the reservoir. The locating points of hydraulic cylinder are restricted to limited space and determined to minimize the cylinder force necessary for actuating the sluice gate. Generally, the head end point of cylinder is fixed at underground and the rod end point of cylinder is connected to the gate plate when it is fully opened. Therefore there exist three parameters to be determined to minimize the cylinder force in the operation range of sluice gate. The optimal locating points of hydraulic cylinder are obtained using the complex method that is one kind of constrained direct search m method.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.893-898
• /
• 2004

The hydraulic cylinder is used for actuating a sluice gate which controls the volume of water in the reservoir. Generally, the one cylinder type is used to operate the sluice gate. In order to reduce the required cylinder force to operate the sluice gate significantly, the sequentially operated-hydraulic cylinders type is designed and the optimal locating points of cylinders are searched using the complex method that is one kind of constrained direct search method.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.897-902
• /
• 2007

The turnover-type sluice gate is typically actuated by the open circuit hydrauic system since the single-rod cylinder is used rather than the double-rod cylinder. However, here the closed circuit hydrauic system is applied for the operation of turnover-type sluice gate for the purpose of convenient operation. The closed circuit hydraulic system of turnover-type sluice gate is composed of a bi-directional pump, single-rod cylinders, pilot operated check valves, check valves and a counter balance valve. The usefulness of the closed circuit hydraulic system is verified for the several operational conditions by the computer simulations.

• 유공압시스템학회논문집
• /
• 제1권4호
• /
• pp.1-8
• /
• 2004

The optimum design parameters of several hydraulic systems are obtained using the complex method that is one kind of constrained direct search method. First, the parameters of lead-lag controller of the direct drive servovalve is designed using the complex method to satisfy the steady-state error requirement. Second, the optimum locating point of hydraulic cylinder Is determined to minimize the cylinder force in the operation range of rotational sluice gate. For the third application case, the optimum piston area of hydraulic cylinder is determined to minimize the man power to elevate the manually operated sluice gate.

• 대한토목학회논문집
• /
• 제30권4A호
• /
• pp.337-342
• /
• 2010

일반적으로 하천 시설에 사용되는 수문은 기계식 및 유압식, 혼합식 권양기에 의하여 개폐되며, 구조물의 크기 및 구조상 2개 이상의 인양장치로 동조를 이루며 안전하게 개폐되어야 한다. 수문의 개폐 시 설계상 정확히 고려할 수 없는 수압 및 마찰로 인하여 구조물에 추가적인 하중이 발생하게 된다. 이러한 추가적인 하중은 수문의 끼임 현상 및 권양기의 과부하 등을 초래하고, 이는 수문의 안전에 중대한 영향을 미치게 된다. 본 논문에서는 이러한 수문의 개폐 시 발생하는 불안전한 요소에 대응하여 권양기가 동조를 이룰 수 있도록 유압 및 변위를 동시에 고려한 FDC(Force-Displacement Control)시스템을 설계하였다. 설계된 FDC 시스템을 XG5000프로그램의 PID 기능을 이용하여 구현하였으며, 다중 유압 실린더 수문 권양기(winch) 모형을 제작하여 FDC 시스템을 실험적으로 검증하였다. 실험 결과 개발한 FDC 시스템은 수문의 개폐 시 발생하는 다양한 외부하중에 대응하여, 다중 유압 실린더로 이루어진 수문 권양기가 동조를 이루며 개폐됨을 확인하였다. 실험 결과로부터 FDC 시스템은 수문 권양기에 적용시 효과적임을 확인 하였다.