• 한국자동차공학회논문집
• /
• 제14권4호
• /
• pp.192-198
• /
• 2006

The real-time simulator of a turning-type sluice gate actuated by the hydraulic cylinders is developed using a PC and a visual C++ program language. The real-time simulator receives the directional control valve signal selected by the operator using the mouse, updates the state variables of the turning-type sluice gate system responding to the control signal, and draws the moving figures of the sluice gate, cylinder, reserved water every drawing time on the PC monitor. Also, the operator can observe the sluice gate angle, cylinder force, cylinder pressures, and hydraulic power representing the operation of sluice gate system through the PC monitor every drawing time. The simulator can be a very useful tool to design and improve the turning-type sluice gate system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.893-898
• /
• 2004

The hydraulic cylinder is used for actuating a sluice gate which controls the volume of water in the reservoir. Generally, the one cylinder type is used to operate the sluice gate. In order to reduce the required cylinder force to operate the sluice gate significantly, the sequentially operated-hydraulic cylinders type is designed and the optimal locating points of cylinders are searched using the complex method that is one kind of constrained direct search method.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2001년도 정기학술대회
• /
• pp.91-97
• /
• 2001

These Study are for the development of the reliability assessment test code and test equipment and test procedures of the heavy sluice gate hydraulic cylinder. Because there is no reliability test code for the heavy sluice gate hydraulic cylinder inside and outside of the country, the modified reliability test code is made reference for the related existing standards like as ISO, JIS, MIL, TUV, DIN, KS and etc. In this study, the novel method is proposed to evaluate efficiency of the heavy sluice gate hydraulic cylinder on the loading conditions and established the conditions of the acceleration life test to reduce the testing time and cycles. The testing equipments for life test, lode operating test, high and low temperature test and salt spray test have been established for 8 month, and the reliability tests are accomplished. The test results of the heavy sluice gate hydraulic cylinder which is produced and tested initially in Korea are satisfied the durability life cycle on the using conditions.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2015년도 학술발표회
• /
• pp.378-378
• /
• 2015

연안지역에서 발생하는 퇴적 및 침식현상으로 발생하는 피해를 분석하기 위하여, 고립파를 이용한 연구가 계속 진행되어왔다. 고립파는 파고의 크기에 따라 파형이 결정되는 특징을 가지고 있어 연안지역 파랑에 관한 연구에 적합하다. 기존연구는 sluice gate를 순간적으로 개방하는 방식을 통해 갑작스러운 수위의 변화를 유도하여 급변부정류흐름을 발생시키는 연구를 수행하였으나, 고립파 발생 조건에 대한 상세한 분석은 수행하지 못하였다. 본 연구는 기존연구에서 사용한 방식과 동일하게 sluice gate를 개방하여 고립파를 발생시켰으며, 실험조건을 상류 headtank 수위와 하류 수심의 수위차를 이용하는 경우와 sluice gate 개방 속도에 따라 두 가지 경우로 나누어 실험을 수행하였다. 실험에 사용된 직사각형 수리실험수조는 폭 0.8 m, 높이 0.75 m, 수로길이 12 m에서 상 하류의 수위차를 0.05 m 단위로 높이는 방식과 수문개방속도를 0.5 m/s 부터 1.0 m/s까지 범위를 설정하여 두 가지 재현방식에 따라 실험을 진행하였다. 또한 Flow-3D GMO(General Moving Objects)기능을 활용한 수치모의를 수행하였다. 실험조건에 따른 수리실험 결과를 파랑의 특성인 고립파 파고와 파속을 수치모의결과와 비교하여 분석하였다. 수리실험결과와 수치해석결과 유사한 경향을 나타내었으며, 본 연구의 결과는 Sluice gate를 이용한 고립파 수리실험으로 경사면에서 발생하는 침식과 퇴적현상에 관한 기초적인 연구가 될 것이다.

• 한국자동차공학회논문집
• /
• 제13권6호
• /
• pp.170-176
• /
• 2005

The hydraulic cylinder is used for actuating the sluice gate which controls the volume of water in the reservoir. The locating points of hydraulic cylinder are restricted to limited space and determined to minimize the cylinder force necessary for actuating the sluice gate. Generally, the head end point of cylinder is fixed at underground and the rod end point of cylinder is connected to the gate plate when it is fully opened. Therefore there exist three parameters to be determined to minimize the cylinder force in the operation range of sluice gate. The optimal locating points of hydraulic cylinder are obtained using the complex method that is one kind of constrained direct search m method.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.897-902
• /
• 2007

The turnover-type sluice gate is typically actuated by the open circuit hydrauic system since the single-rod cylinder is used rather than the double-rod cylinder. However, here the closed circuit hydrauic system is applied for the operation of turnover-type sluice gate for the purpose of convenient operation. The closed circuit hydraulic system of turnover-type sluice gate is composed of a bi-directional pump, single-rod cylinders, pilot operated check valves, check valves and a counter balance valve. The usefulness of the closed circuit hydraulic system is verified for the several operational conditions by the computer simulations.

• 한국정보전자통신기술학회논문지
• /
• 제7권3호
• /
• pp.117-120
• /
• 2014

수문 제어의 주요기술은 두 개의 실린더가 하나의 수문을 동시에 10[m] 이상 들어 올리는 행정 동안 정밀하게 제어되도록 하여 동기 작동 시키는 것이다. 실린더에 공급되는 유량 및 압력이 일정하지 않으며, 실린더 피스톤의 비선형적인 마찰력에 의해 두 개의 실린더 위치 오차가 발생하게 되면 수문의 개폐 시 비틀림 현상을 야기 시켜서 수문의 마모를 발생시키고, 수문의 개폐작동 불능 현상을 마들기도 한다. 배수갑문용 유압실린더의 위치 및 동기 제어기를 설계하기 위하여 fuzzy PI 제어기를 이용하여 두 개의 실린더의 위치 및 동기 제어기를 설계하고, 시뮬레이션을 통해 효용성을 제시한다.

• 유공압시스템학회논문집
• /
• 제6권2호
• /
• pp.14-21
• /
• 2009

The typical hydraulic hoisting system of the rack-bar type sluice gate is composed of a hydraulic supply unit using an uni-directional pump, a direction control valve, a hydraulic motor, a counter balance valve, and flow control valves. Here, the hydrostatic transmission is applied to the hoisting system of rack-bar type sluice gate to simplify the operation of gate such that the upward and downward direction of gate is simply controlled by the direction of pump rotation. The new hydraulic hoisting system is composed of a bi-directional pump, a hydraulic motor, two counter balance valves, two check valves, two pilot-operated check valves, two relief valves and a shuttle valve. The characteristics of a suggested system are analyzed by computer simulations.

• 유공압시스템학회논문집
• /
• 제7권4호
• /
• pp.15-22
• /
• 2010

The typical hydraulic hoisting system of the rack-bar type sluice gate is composed of a hydraulic supply unit using an uni-directional pump, a direction control valve, a hydraulic motor, a counter balance valve, and flow control valves. Here, the hydrostatic transmission is applied to the hoisting system of rack-bar type sluice gate to simplify the operation of gate such that the upward and downward direction of gate is simply controlled by the direction of pump rotation. The new hydraulic hoisting system is composed of a bi-directional pump, a hydraulic motor, a counter balance valve, two check valves, two pilot-operated check valves, two relief valves and a shuttle valve. The characteristics of a suggested system are analyzed by computer simulations and experiments.

• 유공압시스템학회:학술대회논문집
• /
• 유공압시스템학회 2010년도 춘계학술대회
• /
• pp.86-92
• /
• 2010

The typical hydraulic hoisting system of the rack-bar type sluice gate is composed of a hydraulic supply unit using an uni-directional pump, a direction control valve, a hydraulic motor, a counter balance valve, and flow control valves. Here, the hydrostatic transmission is applied to the hoisting system of rack-bar type sluice gate to simplify the operation of gate such that the upward and downward direction of gate is simply controlled by the direction of pump rotation. The new hydraulic hoisting system is composed of a bi-directional pump, a hydraulic motor, a counter balance valve, two check valves, two pilot-operated check valves, two relief valves and a shuttle valve. The characteristics of a suggested system are analyzed by computer simulations and experiments.