• Korean Journal of Environmental Agriculture
• /
• v.16 no.4
• /
• pp.285-290
• /
• 1997

This study was conducted to develop labor-saving pesticide-fertilizer mixed formulation through a single application of mixed formulation of an insecticide imidacloprid coated on a slow release urea. The release of both total nitrogen and imidacloprid into water was delayed with increasing adhesive.Imidacloprid was released out 95% within 24 hours, whereas total nitrogen released in mixed formulation until 40 days was released less extent by increasing adhesive. There was no difference between pesticide-fertilizer mixed formulation and coated urea thereafter. The content of $NH_4-N$ in the soil treated with pesticide and urea seperating was higher until 10 days but gradually decreased compare to that of pesticide-fertilizer mixed formulation or coated urea. The population density of nitrate reducing bacteria and denitrifying bacteria in soil after treatment were lower in the pesticide-fertilizer mixed formulation and coated urea than those of pesticide and urea separate treatment. The residue of imidacloprid in soil was slightly higher in the treatment of pesticide alone than the pesticide-fertilizer mixed formulation and pesticide and urea seperating treatment. The population and control efficacy of small brown planthopper, Laodelphax striatellus, were not significance different among treatments.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.58 no.1
• /
• pp.1-10
• /
• 2016

The objective of this study was to investigate the effects of farming methods on mass balance from paddy rice. The experiment fields were established at Chunpo-myeon, Iksan-si in the Saemangeum watershed. Experiment was performed during the growing season to assess water and mass balances of the study field in 2013. The three different farming practices were applied: conventional (TR-A), drainage outlet heighten (TR-B) and slow release fertilizer use (TR-C). Drainage amount from TR-B was reduced by 28.5 % compared to the TR-A, while the amount from TR-C was similar to that of TR-A. Overall, nutrient concentration of paddy water were similar among the treatments except for T-P. Mean T-P concentration from TR-C was lower than that from TR-A (p-value<0.05). As the results of mass balance, TR-B appeared to reduce nutrient surface loss, substantially by 30.9 % and 40.8 % for T-N and T-P an compared to TR-A. TR-C treatment also demonstrated nutrient load reduction by 38.2 % and 40.1 % for T-N and T-P. The study results showed that water and fertilizer treatments are effective in surface load reduction respectively from paddy fields, and, long-term monitoring and evaluation is needed to confirm the reduction.

• Asian Journal of Turfgrass Science
• /
• v.26 no.2
• /
• pp.135-139
• /
• 2012

Creeping bentgrass (Agrostis stolonifera) is one of the most popular turfgrasses for high-quality playing surface such as putting green on golf courses and athletic fields. Continues damage such as divot injury on creeping bentgrass is major issue to maintain golf course properly. Although plentiful researches to maximize divot resistance have been reported, minimal research has focused on relation between nitrogen (N) sources and divot resistance. The study was conducted to determine the effect of N source for turfgrass divot recovery and overall tee performance. Eleven fertilizer treatments as N sources were applied to creeping bentgrass 'Penncross'. Before the first application, divot injuries were simulated by removing a core of soil and turfgrass from established plots and backfilling with native soil. Data collection included turfgrass color and quality. N release speed did not influenced divot recovery. Frequency of urea application had no effects on divot recovery. Urea with split application had no difference with no treatment for divot recovery. Polyon product especially polyon mini (41-0-0) had the best performance for divot recovery and for maintaining better turfgrass quality. Overall, small particle size of slow-release N form would influence creeping bentgrasss to recover divot damage.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.3
• /
• pp.296-302
• /
• 2007

This study was conducted to evaluate the effect of slow release fertilizers (SRF), crotonylidene diurea (CDU) and latex coated urea (LCU), on nitrogen (N) use efficiency (NUE) and nitrate-N leaching in a silty clay loam soil under polyethylene film mulching (PFM) for sesame cultivation. In PFM plot, concentrations of $NO_3-N$ and $NH_4-N$ in SRF applied soils were less than that in the urea plot during the whole growing period. However, $NO_3-N$ and $NH_4-N$ in all the non-mulched plots (NM) were not significantly different. Urea-N in soil treated with SRF was higher than urea plot until 50 days after application and was comparable in all the treatments after 50 days. $NO_3-N$ concentrations in leached solution in 21 days after urea fertilization in PFM and NM were 26 mg $L^{-1}$ and 83 mg $L^{-1}$, respectively. However, $NO_3-N$ in leached solution at applied CDU and LCU was less than that of urea similar to nitrate concentration in soil. $NO_3-N$ in leached solution in applied CDU and LCU in 44 days after application was about 25% lower than that urea plot and PFM, while the $NO_3-N$ concentration of CDU and LCU treatment in NM did not changed. Application of SRF increased the yield of sesame and N recovery compared to urea and there was a little difference between SRF and N levels. In conclusion, application of 80% N level with SRF increased N recovery and reduced nitrate leaching without reduction of yields compared with urea application.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.4
• /
• pp.74-80
• /
• 2000

A series of studies on nitric-acid pulping of municipal recycled waste papers were carried out to substitute the bleached chemical pulp imported for producing printing paper as well as to use its solidified spent-liquor as fertilizer. The first experiment was carried out to find the optimum treatment conditions such as pulp consistency, nitric acid charge and temperature in $HNO_3$-alkali pulping process. The results obtained were as follows: 1. Some selective delignification of OCC pulp was conducted by $HNO_3$-alkali process. The higher the temperature and concentration of nitric acid, the lower the pulp yield and kappa number of treated pulp. while its brightness was increased. 2. The higher consistency required the stronger mixing in case of more than 5% pulp. 3. In the laboratory, the suitable $HNO_3$-treating condition seemed to be less than 6% consistency, lower than 500% $HNO_3$charge on pulp and lower than $100^{\circ}C$ in cooking temperature. 4. The spent liquor with 1.77% N-content seemed to be slow-release nitrogen fertilizer suitable for agriculture.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.5
• /
• pp.565-571
• /
• 2010

One of the disadvantages of flooding treatment for desalting from soils is that salts move to deep soils after flooding and at the end reaccumulate at the soil surface through capillary movements. This study was carried out to remove salts from soils in plastic film houses by a modified flooding method, drainage after flooding. The method successfully removed salts at the soil surface and salts did not move to the deep soil. Drained water containing N, P and K could be reused as fertilizer. By applying small amount of MgO, turbidity of water flooded decreased in 30 min by 95%. Struvite should be formed since the flooded water contain ammonia and phosphorous and their concentrations were decreased. This could be utilized as fertilizer which provides a slow-release source of phosphorus, magnesium and nitrogen that features low inherent water solubility.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.1
• /
• pp.8-14
• /
• 2000

Long term cultivation crops like tomato, capsicum, melon etc. demand much amount of continuous supplying of nutrition during the whole growing periods. It is not easy to cover satisfactorily the nutritional demands for them by splitted top dressings, slow release fertilizer applications and fertigation systems. To overcome these problems, the "CULTAN" (Controlled Uptake Long Term Ammonium Nutrition) Beaker Deposit techniques have been developed and it was put into PVC beaker with the combined nitrogen fertilizer type mixed with the ratio of one-third of ammonium sulfate-N and two-thirds of urea-N, in which nitrogen was loaded on the demanding amount of a tomato plant during the growing period. Gypsum was mixed as a binder, and loamy soil and compost were used as a diffusion regulator. It was placed upside down into root zone of tomato at the transplanting. Tomato roots were spreaded into the Deposit beaker by ammonium ions which attract root growth. The tomato fruit yield and nitrogen uptake by plant were increased by application of $NH_4$-Beaker deposit fertilizer rather than those of common fertilizer treatment. In conclusion, it was able to improve economic and ecological benefits through CULTAN system compared with common fertilization systems. CULTAN system was estimated as a prospective alternative to enhance productivity and minimize nutrient lose. In addition, it shows further developing possibility of CULTAN system by the supplement of micro-nutrients and pesticides in the macro-nutrient beaker deposits.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.1
• /
• pp.68-76
• /
• 1996

To elucidate the optimum fertilizer level and application method for band application under puddled-soil drill seeding in Jeonbuk series of fluvio-marine alluvial soil at National Honam Agricultural Experiment Station in 1995, using Dongjinbyeo, slow releasing compound fertilizer of 100％ and 80％ to conventional application level was applied totally as basal fertilizer simultaneously with seeding under 3cm and 5cm depth from soil surface in a distance of 4cm from the seeded row. Plant height was taller and tiller number was higher in band application than conventional application but ratio of effective tiller was vice versa. Panicle number was more but ratio of effective tiller ratio was lower in 100％ than 80％ level of band application and they were higher in 3cm than 5cm depth from soil surface. Leaf area index and dry weight was higher in conventional application at early growth stage but was vice versa after maximum tillering stage, and they were higher in 3cm depth at early growth stage but 5cm depth after maximum tillering stage. NH$_4$-N in soil was higher in conventional application at 25 days after seeding but, thereafter was lower than band application and it was higher in 3cm than 5cm depth till 40 days after seeding but was versa, thereafter. Lodging degree was slightly higher in band application, 100％ level and 5cm depth than in their counterparts. Panicle number and grain number per $m^2$ was lower in conventional application than 80％ or 100％ level of band application without significant difference between band application levels or application methods. Yield was higher at 80％ level of band application under 3cm depth than conventional application, but no significantly different among other application methods. Therefore, 80％ level of band application under 3cm depth of soil surface was more effective for puddled-soil drill seeding on the basis of the reduction of application efforts, better plant growth and higher yield in rice.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.2
• /
• pp.100-104
• /
• 1989

This study was carried out in order to develop a compound fertilizer for raising rice seedling in trays. A compound fertilizer, a trail product, was manufactured using the major fertilizer sources of ammonium sulfate, diammonium phosphate and potassium chloride in combination with zeolite and glutamic acid fermentation waste. Besides, polyacrylamide for slow release control of the fertilzer and Tachigaren and sulfuric acid for reducing the occurrence of seedling rot were used. The component ratios of N, $P_2O_5$ and $K_2O$ of trial product were 4.19, 5.41 and 4.05 percent respectively. The dissolution rate of nitrogen component in water for the trial product with polyacrylamide was lower about fifteen percents than the product without polyacylamide in six hours. Hymexazole, main component of Thachigaren, from the product was released about 86.2 percents in forty eight hours. When the product with polyacylamide applied on red earth soil and paddy soil, the pH of soil ranged from 4.6 to 5.4 for 25 days experiment.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.6
• /
• pp.747-756
• /
• 1995

To find out the optimum application method of slow-releasing fertilizer(SRF) and conventional fertilizer(CF) with different fertilization rate under two culture methods[l0-day old seedling machine transplanting(MT) and direct-sowing on dry paddy(DS)] in the south-western region(clay loam soil) of Korea, used were Chosun slow-releasing fertilizer(silicate latex coated fertilizer: N-P$_2$O$_{5}$-K$_2$O =18-12-13) and conventional fertilizer. Plant height and number of tillers with different two culture methods were higher at MT than DS in early growth. The ratio of dry weight in heading stage was higher at CF than SRF in MT than DS and especially, SRF 80% + CF 20% than SRF 100% or CF 100%. Leaf area index (LAI) in heading stage was higher at CF in MT but higher at SRF in DS than their counterparts. Chlorophyll content was higher at SRF than in CF expect for heading stage(HS), especially in DS. It was highest at HS in CF without its difference during maximum tillering stage(MTS) and panicle formation stage(PFS), while highest at PFS in SRF with tendency of gradual increase and decrease before and after PFS, respectively. Heading was delayed 2~3 days at SRF in two cultrue methods and 4~5 days at SRF in DS in comparison with CF in MT with delay of 2 days at DS compared with MT. Culm length was longer at CF in MT and at SRF in DS than their counterparts. Panicle number per m was more at SRF and in DS. Filled grain ratio was higher at CF and in MT. Yield was obtained 101 and 100% at 100% and 80% level of SRF in DS respectively, and 96% at 80% level of CF in MT, compared with conventional application method (516kg /l0a), and increased 2~4% at DS and 0~3% at MT in SRF. Yield was high in order of 100%(SRF) =80%(SRF) + 20%(CF) > 100%(SRF) + 20%(CF) > 80%(SRF) at MT and 80%(SRF) + 20%(CF) =100%(SRF) > 80%(SRF) =100%(SRF) + 20%(CF) at DS.