• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권4호
• /
• pp.398-402
• /
• 2014

This paper presents the comparison study of permanent magnet (PM) eddy current of concentrated winding type surface permanent magnet synchronous motor (SPMSM) with different rare-earth magnet shapes. The fractional slot winding having 10 poles and 12 slots is studied. The PM eddy current is analyzed to compare for each shape by 2 dimensional (2D) finite element analysis (FEA). The eddy current and their loss of particular position of PM as well as their distributions are displayed for each model. The effect of partly enlarged air-gap made by PM shape to PM eddy current is compared.

• 한국산업보건학회지
• /
• 제16권3호
• /
• pp.290-301
• /
• 2006

A push pull hood system is frequently applied to control contaminants evaporated from an open surface tank. Efficiency of push pull hood system is affected by various parameters, such as, cross draft, vessel shapes, tank surface area, liquid temperature. A previous work assisted by flow visualization technique qualitatively showed that a strong cross draft blown from the pull hood to push slot could destroy a stable wall-jet on the surface of tank, resulting in the abrupt escape of smoke from the surface. In this study, the tracer gas method was applied to determine the effect of cross-draft on the capture efficiency qualitatively. A new concept of capture efficiency was introduced, that is, linear efficiency. This can be determined by measuring the mass of tracer gas in the duct of pull hood while the linear tracer source is in between push slot and pull hood. By traversing the linear tracer source from the push slot to the pull hood, it can be found where the contaminant is escaped from the tank. Total capture efficiency can be determined by averaging the linear efficiencies. Under the condition of cross-draft velocities of 0, 0.4, 0.75, 1.05 and 1.47m/s, total capture efficiencies were measured as 97.6, 95.4, 94.6, 92.7 and 70.5% respectively. The abrupt reduction of efficiency with cross-draft velocity of 1.47m/s was due to the destruction of tank surface wall-jet by the counter-current cross-draft. The same phenomenon was observed in the previous flow visualization study. As an alternative to overcome this abrupt efficiency drop, the 20% increase of hood flow rates was tested, resulting in 20% efficiency increase.

• 한국산학기술학회논문지
• /
• 제18권6호
• /
• pp.464-469
• /
• 2017

유도전동기 회전자는 rotor core를 일정한 높이로 쌓은 후 rotor core slot에 Cu bar를 열박음(shrinkage fit)작업으로 고정한 후 Cu bar 표면을 punch로 길이방향, 원주방향으로 순차적으로 압입(swaging)하여 제작된다. 본 연구에서는 Cu bar 표면을 압입할 때 Cu bar 표면에 발생하는 압입깊이, 잔류응력 분포 그리고 rotor core slot과 Cu bar 접촉면에 작용하는 접촉력(contact force)을 평가하고자 하였다. 한편 실제의 압입작업은 복잡한 3차원 문제이나 수치해석적인 접근을 위하여 단순화된 2차원 cyclic symmetry 해석모델을 개발하였으며 이러한 해석모델을 사용하여 일정한 압입압력에서 4가지 종류의 Cu bar 형상에 대하여 압입량과 접촉력을 평가하였다. 탄소성 수치해석 결과 1) sample Cu bar block model을 사용하여 단순화된 2차원 수치해석 모델을 개발하였고 2) rotor core 압입작업시 일정한 압입압력에서 Cu bar 표면의 압입량은 Cu bar 형상에 크게 관계없이 거의 일정하며 3) 압입작업시 punch에 가해지는 압입압력으로부터 rotor core slot과 Cu bar 접촉면에 작용하는 총 접촉력을 추정할 수 있는 근사식을 제안하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.346-350
• /
• 2001

PMSM drives are widely used in the industrial and residential applications because of high efficiency, high power density and high performance. For better performance of PMSM, however, torque ripples should be reduced. This paper investigates a reduction of torque ripple due to the unsinusoidal flux linkage produced by the shapes of stator slot and magnetic pole. To minimize torque ripple, a simple flux estimator is proposed. This method interatively compensates the distributed flux linkage from an error between the measured and estimated currents. The proposed algorithm is verified through simulation.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 1997년도 추계학술대회발표논문집; 홍익대학교, 서울; 1 Nov. 1997
• /
• pp.41-44
• /
• 1997

This paper is to provide an integration approach between design and process planning for mechanical parts, using feature recognition. We develop a method to extract each individual feature of an object from 3D modeling data using face-edge graph based algorithm and then propose an approach to recognize the volumic form features using heuristic rules. we demonstrate the proposed approaches are effective for such basic shapes as pocket, slot, through hole, etc.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.918-920
• /
• 2001

PMSM drives are widely used in industrial and residential applications because of high efficiency, high power density and high performance. For better performance of PMSM, however, torque ripples should be reduced. This paper investigates a reduction of torque ripple due to the unsinusoidal flux linkage produced by the shapes of stator slot and magnetic pole. To minimize torque ripple, a simple flux estimator is proposed. This method iteratively compensates the distributed flux linkage from an error between the measured and estimated currents. The proposed algorithm is verified through simulation.

• 소성∙가공
• /
• 제15권9호
• /
• pp.654-659
• /
• 2006

In this paper, the real shapes of micro tool deflection were observed. In micro endmilling process, micro tool deflection generates very serious problems in contrast to macro tool deflection. For analyzing the micro tool deflection, the trend of micro tool deflection was observed using real captured images in this paper. To get the real images of micro tool deflection, micro slot cutting processes were executed under cutting volume using micro endmill($Dia.\;200{\mu}m$) and real images of tool deflection were obtained during cutting processing by high-speed camera. Finally, the extent of tool deflection was calculated by the deflection angle according to cutting volume.

• 대한기계학회논문집A
• /
• 제26권12호
• /
• pp.2574-2580
• /
• 2002

In this paper, an experimental verification has been conducted for the frequency response function (FRF)-based structural damage identification method (SDIM) proposed for beam structures. The FRF-based SDIM requires the natural frequencies and mode shapes measured in the intact state and the FRF-data measured in the damaged state. Experiments are conducted for the cantilevered beam specimens with one slot and with three slots. It is shown that the proposed FRF-based SDIM provides damage identification results that agree quite well with true damage state.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.9-11
• /
• 2008

When a squirrel cage induction motor is loaded, the electromagnetic noise can increase depending on the load current. It is due to the air gap harmonic fluxes from the rotor current induced during loading. This unfavorable noise can be anticipated by calculating the radial force waves in the air gap, vibration mode shapes of them, and stator core natural frequencies of each mode. With the experimental tests with the different rotor slot numbers, the variation of electromagnetic noise is studied between on-loaded and loaded running.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권2호
• /
• pp.5-11
• /
• 2005

Among the micro machining techniques, micro EDM is generally used for machining micro holes, pockets, and micro structures on difficult-cut-materials. Micro EDM parameters such as applied voltage, capacitance, peak current, pulse width, duration time are very important to fabricate the tool electrode and produce the micro structures. Developed micro EDM machine is composed of a 3-axis driving system and RC circuit equipped with pulse generator. In this paper, using micro EDM machine, the characteristics of micro EDM process are investigated and it is applied to micro holes, slots, and pockets machining. Through experiments, relations between machined surface and voltages and between MRR and feedrate are investigated. Also the trends of tool wear are investigated in case of hole and slot machining.