• Geomechanics and Engineering
• /
• 제13권4호
• /
• pp.701-714
• /
• 2017

The effect of nearby cohesionless sloping ground on the uplift capacity of horizontal strip plate anchor embedded in sand deposit with horizontal ground surface has been studied numerically. The numerical analysis has been carried out by using the lower bound theorem of limit analysis with finite elements and linear optimization. The results have been presented in the form of non-dimensional uplift capacity factor of anchor plate by changing its distance from the slope crest for different slope angles, embedment ratios and angles of soil internal friction. It has been found that the decrease in horizontal distance between the edge of the anchor plate and the slope crest causes a continuous decrease in uplift capacity of anchor plate. The optimum distance is that distance between slope crest and anchor plate below which uplift capacity of an anchor plate has been found to decrease with a decrease in normalized crest distance from the anchor plate in presence of nearby sloping ground. The normalized optimum distance between the slope crest and the anchor plate has been found to increase with an increase in slope angle, embedment ratio and soil internal friction angle.

• 대한토목학회논문집
• /
• 제4권3호
• /
• pp.11-18
• /
• 1984

사면의 안정 해석방법은 사면의 제반 조건 및 파괴면의 형태에 따라 유한사면법과 무한 사면법 등으로 나눌수 있는데 무한사면법은 그 해석 방법이 단순 명료하여 사용이 간편한 반면에, 단영향을 무시하고 경사면에 평행한 파괴면을 가정하는 등 대략적인 면이 있어서 그 적용범위에 한계성을 내포하고 있다. 본 논문에서는 무한사면법을 적용하여 공학적으로 허용할 수 있는 범위내의 오차를 주는 사면을 정의하기 위하여 가상사면을 다양하게 설정하고 각 사면에 대한 유한 사면법과 무한 사면법의 안정해석 결과를 안전률을 이용하여 비교 분석하였다. 그 결과로 무한사면법은 무한사면파괴가 예상되는 한계높이에 대한 사면높이의 비가 대략 9보다 같거나 클때 적용 가능하다고 판단되었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.171-178
• /
• 2005

It is unavoidable to be formed slopes under special circumstance of Korea where 70% of the whole area are composed of mountains when civil engineering projects such as roads, site developments are increased with industrial development and horizontal expansions of urban area. Moreover, stability of the slopes become one of quite important issues under special meteorological characteristics that over two-thirds of annual average rainfall are concentrated in summer season and the localized torrential downpour are getting more frequent recently. Resulting in these circumstances, partial slope failures by debris flow of the high water content soils are occurred frequently in cutting soil slopes. In this case of debris flow slope failure, slope declination method are selected for their stable recovery because it is impossible to recover entirely by existing recovery methods. Seeding or special grass planting methods are followed separately without exception. The method by which entire recover with bigger stability ratio would be possible and grass planting work would be done simultaneously is developed. In this study, the results of the tests including a real construction history in a failed slope using developed method are described

• 한국초지조사료학회지
• /
• 제7권2호
• /
• pp.97-102
• /
• 1987

To find out the nutrient contents of temperate grasses on the south and north slope, a field experiment was conducted with five forage species of Dactylis glomerata, Festuca arundinacea, Phleum pratense, Agrostis gigantea and Trifolium repens. It was treated by randomized block design with 4 replications and lasted from September, 1983 to October, 1986 in Suweon. The results obtained are summarized as follows: 1. Mean chemical compositions except NFE and crude fiber of the forage species on the south slope were a little more contented than that of north. But all crude components were significant difference among the species on the south and north exposure. 2. Production of TDN (total digestible nutrient), StE (starch equivalent) ME (metabolizable energy) and NEL (net energy lactation) of different grass species on the north slope were much more increased by 5-30% per ha (Dactylis glomerata by 5-876, Festuca arundinacea by 5%, Phleum pratense by 24-26% and Agrostis gigantea by 25-30%) than that of same grasses on the south, however, those of Trifolium repens were much more increased by 4 1-42% per ha in the south. 3. Mineral contents, Ca/P ratio and K/ (Ca + Mg) equivalent ratio of the species were slightly different between the exposures. But considering the factors of occuring grass tetany, those of the forage species on the north slope were better than that of same species on the south.

• 한국지반공학회지:지반
• /
• 제14권2호
• /
• pp.55-66
• /
• 1998

본 논문의 목적은 불연속면의 공학적 특성, 사면형상과 하중조건 등을 고려한 암반사면 전도 파괴에 대한 안정해석방법을 개발하고 적용하는테 있다. 암반사면의 전도파괴에 대한 안정은 경사각 $\alpha_s$ 와 H/t비에 주된 영향을 받는다. 설계적용을 위하여 매개변수에 따른 My띠와 $\alpha$서 함수로 표현되는 암반사면 전도파괴에 대한 안정도표를 작성하였다. 안정도표에서 $\alpha_s$와 Hy띠가 작아질수록 안정성이 증가하는 경향을 보인다. 안정도표에서 안정영역은 간극수압변화에 따라 가장 크게 감소한다. 파괴영역의 변화는 지진력과 단계각에 가장 민감하다.

• 한국조경학회지
• /
• 제27권5호
• /
• pp.80-93
• /
• 2000

This study measured the shearing resistance of the roots of the Pinus Koraiensis by the tensile strength gained through their individual tensile test for the Root Reinforcement Model. On the basis of the shearing resistance value calculated through such a process the factor of safety(Fs) was comparatively presented by using the simplified Janbu Method in PCSTABL5M, the slop-analyzing software which had been developed in Purdue University of the U.S.A according to the shape of a slope and the type of soil. The results to have measured a stress and the factor of safety(Fs) by experiment are as follows. 1) The mean root diameter of the Pinus Koraiensis used for this experiment was 2.483mm and the mean tensile stress was calculated as 422.846(kgf/$\textrm{cm}^2$). In the strain ratio of material and the elastic modulus was measured 7.8%, 9,291.92(kgf/$\textrm{cm}^2$). 2) The shearing strength including the resistance of soil and root is expressed as Rt=C+Cr+$\sigma$.tan . ΔCr(kg/$\textrm{cm}^2$) of the shearing resistance calculated by estimating the areal ratio of roots at 10 is 0.253(kgf/$\textrm{cm}^2$). 3) As the result of making an analysis of the natural slope stability by the soil parameter, the factor of safety(Fs) was calculated at 1.795 in CL, and the stability analysis of the root reinforcement slope, Fs was calculated at 1.952. However, since a precise analysis of the controlled factors of the slope analyses are demanded for more accurate dynamic analyses, the future demands a study on this.

• 지질공학
• /
• 제34권2호
• /
• pp.317-327
• /
• 2024

대규모 암반 사면에서 비연속성의 절리계가 발달할 때, 계단상 활동면에 의한 사면 파괴가 발생할 수 있다. 계단상 활동면은 절리-절리 활동면 또는 절리-암교 활동면으로 구분할 수 있으며, 절리-암교 활동면에서 암교는 절리와 평행한 전단 저항과 절리에 수직인 인장 저항을 제공한다. 계단 경로 파괴는 활동 암괴의 하중에 의해 암교의 파괴가 발생하여 암교 양단의 두 절리가 연결되며 발생한다. 암교의 길이가 동일하다면 암석의 인장강도가 전단강도에 비해 낮으므로 절리에 수직으로 형성된 암교가 파괴에 취약하며, 불연속면 간격/길이의 비가 작을수록 계단 경로 파괴의 가능성이 커진다. 비연속성의 절리가 발달하는 암반 사면의 계단상 활동 파괴 위험에 대한 평가를 위해서는 체계적인 불연속면 조사 및 분석을 통해 계단 경로 파괴면을 구성하여 한계 평형 해석 또는 수치 해석 등의 안정성 평가를 수행하여야 한다.

• Geomechanics and Engineering
• /
• 제24권4호
• /
• pp.389-397
• /
• 2021

Pile foundation is a typical form of bridge foundation and viaduct, and large-diameter rock-socketed piles are typically adopted in bridges with long span or high piers. To investigate the effect of a mountain slope with a deep overburden layer on the bearing characteristics of large-diameter rock-socketed piles, four centrifuge model tests of single piles on different slopes (0°, 15°, 30° and 45°) were carried out to investigate the effect of slope on the bearing characteristics of piles. In addition, three pile group tests with different slope (0°, 30° and 45°) were also performed to explore the effect of slope on the bearing characteristics of the pile group. The results of the single pile tests indicate that the slope with a deep overburden layer not only accelerates the drag force of the pile with the increasing slope, but also causes the bending moment to move down owing to the increase in the unsymmetrical pressure around the pile. As the slope increases from 0° to 45°, the drag force of the pile is significantly enlarged and the axial force of the pile reduces to beyond 12%. The position of the maximum bending moment of the pile shifts downward, while the magnitude becomes larger. Meanwhile, the slope results in the reduction in the shaft resistance of the pile, and the maximum value at the front side of the pile is 3.98% less than at its rear side at a 45° slope. The load-sharing ratio of the tip resistance of the pile is increased from 5.49% to 12.02%. The results of the pile group tests show that the increase in the slope enhances the uneven distribution of the pile top reaction and yields a larger bending moment and different settlements on the pile cap, which might cause safety issues to bridge structures.

• 한국지반신소재학회논문집
• /
• 제12권4호
• /
• pp.35-44
• /
• 2013

본 연구에서는 개량토 벽면공을 활용한 보강성토사면의 거동에 대하여 실내모형시험 및 수치해석을 통해 분석하였다. 또한 수해발생현장에 이 연구에서의 방법을 이용하여 시험시공으로 보강성토사면을 구축한 후 약 6개월간 전면변위를 측정하여 실제 거동을 분석하였다. 실내모형시험, 수치해석, 현장시험 등을 통해 개량토 벽면공의 강성은 보강성토사면에서 충분한 벽면공의 역할을 수행할 수 있는 것으로 나타났고, 시험시공 후의 전면변위 측정결과 사면높이에 대한 수평변위의 비율은 최대 약 0.4%로 매우 안정적인 것으로 조사되었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.233-242
• /
• 2009

Based on the data obtained from field investigation and soil testing to slope hazards occurrence section and non-occurrence section in crystalline rocks like gneiss, granite, and so on, a prediction model was developed by the use of a decision tree model. The classification standard of the selected prediction model is composed of the slope angle, the coefficient of permeability and the void ratio in the order. The computer program, SHAPP ver. 1.0 for prediction of slope hazards around an important national facilities using GIS technique and the developed model. To prove the developed prediction model and the computer program, the field data surveyed from Jumunjin, Gangneung city were compared with the prediction result in the same site. As the result of comparison, the real occurrence location of slope hazards was similar to the predicted section. Through the continuous study, the accuracy about prediction result of slope hazards will be upgraded and the computer program will be commonly used in practical.