• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 추계 학술발표회
• /
• pp.268-273
• /
• 2006

Slope failures can be occurred by complex mechanism. In this cases, failures shows characteristics of complex failure mechanism during progressive mass movements. A case is a merged large slide with two sliding events triggered by slip on fault plane. Another case shows extension of failure area by sliding or subsidence at backyards of toppling areas. Generally, areas of progressive failures have wider than them of simple events.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.607-614
• /
• 2000

A cost-effective automated slope monitoring system is developed to monitor hazardous cut slopes along highways. This automated slope monitoring system consists of data-collection and visual monitoring, data-transmitting, database and internet service, and alarm system. Wire-line extensometer, automatic raingauge, and CCD camera are selected as monitoring instruments in this system, after consideration of failure characteristics of roadside cut slopes in the country. This paper describes the important features of this newly developed automated slope monitoring system.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.317-322
• /
• 2003

The Sectional and Spatial failure modes are discussed using the experimental data with long crest wave and multi-directional waves considering the failure modes occurring around the rubble-mound breakwater. The spatial & sectional stability and failure mode around the rubble-mound structures with construction progress can be summarized as follows: 1) The rubble mound structures at basic construction step was occurred serious failures when ${\xi}$ was about 6.5. 2) It was clarified that the failure modes at the round head of detached breakwater are classified as failure by plunging breaking on the slope, failure by direct incident wave force and failure by scouring at the toe of the detached break water. 3) The failure mode was found in the lower wave height than the design wave by the breaker depth effect. 4) The failure on the slope were also developed at the lee side of the round head because diffracted wave propagated into the behind area by grouping effect of multi-directional irregular wave.

• 대한토목학회논문집
• /
• 제28권3C호
• /
• pp.167-178
• /
• 2008

본 연구에서는 실제 풍화토 사면에 대하여 침투해석과 안정해석을 수행하여 강우에 따른 사면의 붕괴를 재현하였다. 불교란시료를 채취하여 불포화토 물성을 실험적으로 직접 획득하여 실제 강우량에 의하여 침투해석을 수행한 결과, 토사층과 암층의 경계부를 중심으로 간극수압이 증가하는 경향이 나타났다. 또한 안정해석을 수행한 결과 안전율이 1.0미만으로 감소하여 실제 사면의 붕괴를 재현할 수 있었다. 또한 설계 강우강도에 의하여 침투해석을 수행한 결과 선행강우 및 강우기간에 따른 침투효과를 고려하기 곤란하였다. 이로 인하여 토사층의 수두변화가 크게 발생하지 못하였고 사면의 안전율이 1.0이상으로 나타났다. 또 다른 붕괴 사면의 경우에는 불포화토의 정수들을 인공신경망기법으로 추정하였다. 침투해석 결과 토사층과 연암층 경계부를 중심으로 포화대가 뚜렷하게 형성되었으며 이로 인하여 토사층의 안전율이 1.0미만으로 감소하였다. 이러한 기법을 통하여 실제 사면의 붕괴를 재현하는 것이 가능하다고 판단된다.

• 자원환경지질
• /
• 제33권1호
• /
• pp.51-59
• /
• 2000

As a part of natural hazard assessment, regional slope stability analysis was conducted using Geoscientific Information System (GIS) in the northern area of Chungju Lake. Selected factors which affect the slope stability in the study area were lithology, soil, density of lineament, groundwater level, dip of slope, aspect of slope, and geological engineering properties. Geological structural domains were determined by collected data of joint orientation from about 200 sites in order to produce a slope instability map. Potential type of failure and its direction could be expected through the domains. And a slope instability map was produced, comparing the representative orientations of the domains with the orientations of the slopes which were made through TIN module in ARC/INFO. Under the consideration of environmental geological characteristics of the study area, rating and weighting of each factor of slope stability analysis were decided and spatial analysis of regional slope stability was couducted through overlaying technique of GIS. The result of areal distribution of slope stability showed that the most unstable area was the area between Mt. Pudae and Mt. Jubong, and the northern area of the railway station, Samtan.

• 지질공학
• /
• 제19권4호
• /
• pp.501-508
• /
• 2009

이 연구는 미원과 충주지역을 중심으로 한 옥천변성대 지역에서 절개지사면 토층붕괴와 관련하여 흙의 주요 특성을 알기위해 수행되었다. 실내시험을 위하여 붕괴지 토층과 인근의 비붕괴지 토층에서 35개 사면으로부터 불교란 시료와 교란 시료를 각각 채취하여 일련의 물성시험과 역학시험을 하였다. 분석결과에 의하면 붕괴지 사면의 토질특성은 흙의 활동지수(AMI)가 0.75 이상이고, 액성한계가 32% 이상, 함수비가 31% 이상일 때 붕괴에 취약한 것으로 나타났다. 그리고 붕괴지 토층의 소성지수는 습윤밀도 및 포화밀도와 상관성이 있으며, 소성지수가 크면 간극비가 작아도 붕괴에 취약한 것으로 나타났다. 입도분포는 점토의 함량보다는 모래나 자갈의 함량이 많을수록 붕괴에 더 영향을 미치는 것으로 나타났다.

• Geomechanics and Engineering
• /
• 제12권3호
• /
• pp.483-503
• /
• 2017

Uncertainty is a fact belonging to engineering practice. An important uncertainty that sets geotechnical engineering is the variability associated with the properties of soils or, more precisely, the characterization of soil profiles. The reason is due largely to the complex and varied natural processes associated with the formation of soil. Spatial variability analysis for the study of the stability of natural slopes, complementing conventional analyses, is able to incorporate these uncertainties. In this paper the characterization is performed in back-analysis for a case of landslide occurred to verify afterwards the presence of the conditions of shear strength at failure. This approach may support designers to make more accurate estimates regarding slope failure responding, more consciously, to the legislation dispositions about slope stability evaluation and future design. By applying different kriging techniques used for spatial analysis it has been possible to perform a 3D-slope reconstruction. The predictive analysis and the areal mapping of the soil mechanical characteristics would support the definition of priority interventions in the zones characterized by more critical values as well as slope potential instability. This tool of analysis aims to support decision-making by directing project planning through the efficient allocation of available resources.

• 산업기술연구
• /
• 제25권B호
• /
• pp.55-62
• /
• 2005

This paper is the results of experimental and numerical works on analyzing the geotechnical engineering behavior and characteristics of excavated clay slope formed by the method of excavated replacement which is one of treatments in soft soil ground. For the centrifuge model tests, models of excavated clay slope were prepared by remolding the marine clayey soil sampled from the field. Tests were performed with changing the slope to investigate the behavior of them. On the other hand, numerical analyses were carried out to analyze the change of safety factor against instability of slope with time. Changes of pore water pressure, shear strength and displacement were also investigated. As results of centrifuge model tests with slopes of 1:1.5 and 1:3 using the confining body of simulating the effect of excavation, for the case of 1:1.5, slope failure occurred right after remove the confining body whereas relatively small displacements within the range of 3.2mm, implying to maintain the stability of slope, were observed for the case of 1:3 slope. From the results of numerical analyses using the software of PLAXIS to investigate the stability of slope after excavation, the minimum safety factor against slope failure was 1.28 for the case of 1:3 slope. The further researches in the future are required with considerations of build up of static pore water pressures during acceleration of centrifuge, depth of excavation influencing the behavior of the slope and permeability of the slope since excavation of the slope was not simulated well resulted from the limitations of apparatus at the stage of excavation during the centrifuge tests.

• 한국지반공학회지:지반
• /
• 제14권2호
• /
• pp.55-66
• /
• 1998

본 논문의 목적은 불연속면의 공학적 특성, 사면형상과 하중조건 등을 고려한 암반사면 전도 파괴에 대한 안정해석방법을 개발하고 적용하는테 있다. 암반사면의 전도파괴에 대한 안정은 경사각 $\alpha_s$ 와 H/t비에 주된 영향을 받는다. 설계적용을 위하여 매개변수에 따른 My띠와 $\alpha$서 함수로 표현되는 암반사면 전도파괴에 대한 안정도표를 작성하였다. 안정도표에서 $\alpha_s$와 Hy띠가 작아질수록 안정성이 증가하는 경향을 보인다. 안정도표에서 안정영역은 간극수압변화에 따라 가장 크게 감소한다. 파괴영역의 변화는 지진력과 단계각에 가장 민감하다.

• 한국지반환경공학회 논문집
• /
• 제8권4호
• /
• pp.67-74
• /
• 2007

강우시 우수의 침투로 사면의 안정성은 감소되며, 사면활동에 의한 피해를 최소화하기위해 강우시 토사사면에 대한 사면 안정해석시 지표까지 완전히 포화되는 조건으로 설계하도록 설계기준을 강화하고 있다. 그러나 이와 같은 설계방식은 강우강도, 강우지속시간, 지반특성, 사면의 기하학적 특성 등과 관계없이 동일하게 지표까지 완전 포화조건으로 설계함으로써 지나치게 과다하게 설계되는 경향이 있는 등 문제점이 지적되고 있다. 또한 대부분의 토사사면은 불포화상태에 있으며, 불포화특성을 고려한 사면 안정해석이 수행되어야 할 것이다. 본 논문은 강우시 토사 사면이 완전 포화되기까지 소요되는 강우지속시간을 예측할 수 있는 방법을 제시하였다. 이를 위해 본 논문에서는 불포화토의 흙-수분 특성과 포화시 투수계수, 사면의 기하학적 조건, 강우강도 등을 고려하여 불포화토 사면에 대한 유한요소해석을 실시하여 강우시 토사사면이 완전 포화되기 까지 소요되는 강우지속시간을 예측하였으며, 이들 해석결과로부터 간편하게 사용할 수 있는 예측도표를 제시하였다.