• 제목/요약/키워드: slope area

검색결과 2,021건 처리시간 0.025초

지리산국립공원 바래봉지역 계곡부의 사면방향과 해발고에 따른 산림구조 (Forest Structure in Relation to Slope Aspect and Altitude in Valley forests at Baraebong, Jirisan National Park')

  • 박인협;서영권;최영철
    • 한국환경생태학회지
    • /
    • 제16권4호
    • /
    • pp.449-456
    • /
    • 2003
  • 지리산국립공원의 바래봉지역을 중심으로 북향사면인 용산-바래봉지역과 남향사면인 팔랑-바래붕지역의 계곡부를 대상으로 사면방향과 해발고에 따른 산림구조를 조사분석하였다. 상층임관을 이루는 교목층의 밀도, 평균흉고단면적은 북향사면이 남향사면에 비하여 높았다 북향사면에서는 해발고가 높아짐에 따라 교목층 흉고단면적이 감소하는 경향이었다. 해발고가 증가함에 따라 상대중요치가 증가하는 주요 수종은 신갈나무이었으며, 감소하는 주요 수종은 졸참나무, 소나무 등이었다. 식생층 전체의 목본식물 종다양도는 북향사면이 1.:307로서 남향사면의 1.114보다 높았다 해발고대별 전체 식생층의 종수, 종다양도, 균재도는 2개 사면 모두 해발고가 높아짐에 따라 감소하는 경향이었다 Cluster분석 결과 남향사면 중, 하부의 졸참나무-낙엽활엽수군집, 남향사면 상부 북향사면 중 상부와 계곡 정부의 신갈나무-낙엽활엽수군집. 북향사면 하부의 소나무-신갈나무군집 둥 3개 군집으로 구분되었다. 상대중요치에 의한 종상관 분석결과 서어나무. 졸참나무, 쪽동백나무, 생강나무 등 4개 수종간, 밤나무, 철쭉꽃. 덜꿩나무 등 3개 수종간 유의적인 정의 상관이 있었다.

국립공원 지역에 있어서 토석류 재해의 특성 분석 (Characteristics Analysis of Debris Flow Disaster in Korean National Parks)

  • 마호섭;정원옥
    • 한국환경복원기술학회지
    • /
    • 제13권4호
    • /
    • pp.52-64
    • /
    • 2010
  • This study was carried out to analyze the occurrence characteristics and the influence of forest environment factors on the debris flow of 3 national parks in korea. The results obtained from this study were summarized as follows; The total number of debris flow occurrence was 125 areas. The average length of the debris flow scar was 144m, average width was 20m. And the average area and sediment were $2,854m^2$ and $3,959m^3$ respectively. The factors influencing the debris flow were highly occurred in Metamorphic rock, mixed forest type. And also, slope gradient was $30{\sim}35^{\circ}$, aspect was NE, altitude was over 1,000m, vertical and cross slope was concave (凹), soil depth was below 15cm, stream order was 0 order. The variables of cross slope (complex), deciduous tree, soil depth (over 46cm), cross slope (concave), mixed forest type and altitude (801~1200m) in correlation analysis were significant at 1 % level. The landslide of high mountain area highly tend to change the debris flow in stream bed of torrent. The debris flow in national parks mainly occurred in high mountain area with long ridge and steep slope.

흐름 경사면의 경사도에 따른 토석류 흐름의 특성 분석 (Analysis of Characteristic of Debris Flow with Angle of Slope)

  • 이준선;송창근;이승오
    • 한국안전학회지
    • /
    • 제31권2호
    • /
    • pp.49-56
    • /
    • 2016
  • In Korea, there exist many mountains, and sudden storms occur during the summer season. When severe rainstorm events occur in steep slope topography, risk of debris flow is increased. Once debris flow occurs in urban area, it may cause casualties and physical damages due to rapid debris flow velocity along a steep slope. Accordingly, preventing method of sediment-related disaster for demage mitigation are essential. Recently, various studies on debris flow have been conducted. However, the prediction of the physical propagation of debris flow along the steep slope was not thoroughly investigated. Debris flow is characterized by various factors such as topography, properties of debris flow, amount of debris flow. In the study the numerical simulation was focused on the topographic factor. Fundamental analysis of the risk area was implemented with emphasis on the propagation length, thickness, and the development of maximum velocity. The proposed results and the methodology of estimating the structural vulnerability would be helpful in predicting the behavior and the risk assessment of debris flow in urban area. These results will be able to estimate the vulnerability of urban areas affected the most damage by debris flow.

부산 장산지역에 분포한 절개사면의 특성 (Characteristics of the Cut Slopes located in Mt. Jang Area, Busan)

  • 송영석;김경수;조용찬;이춘오;채병곤
    • 한국지반신소재학회논문집
    • /
    • 제12권3호
    • /
    • pp.65-73
    • /
    • 2013
  • 본 연구에서는 대도시사면 통합관리시스템 구축을 위하여 부산 장산 지역의 절개사면에 대한 현황을 조사하였다. 절개사면에 대한 특징들을 기록할 수 있는 조사용 사면 조사용 시트를 작성하였으며, 조사시트에는 사면정보를 체계적으로 기재할 수 있도록 하였다. 부산 장산 일대의 절개사면은 총 69개소로서 대부분이 옹벽과 사면으로 이루어진 사면(CR)이다. 절개사면에 인접하고 있는 시설물로는 주거시설이 46개소, 학교가 12개소로 조사되었다. 그리고 절개사면의 평균 연장길이는 50m에서 150m로 분포하고, 높이는 10m에서 20m로 분포한며, 토층과 암반층이 혼재된 혼합사면이 가장 많이 분포하고 있다. 사면의 안정성 확보를 위하여 대부분 사면하단부에 옹벽이 설치되어 있으며, 옹벽 및 절개사면의 추가적인 안정성을 확보하기 위하여 앵커공, 배수공, 낙석방지공, 숏크리트공, 식생공 등이 보강되어 있음을 알 수 있다.

자갈하천에서 연속적인 수위 자료를 이용한 경사면적법 유량 산정 -달천 사례연구- (Application of Slope-area Discharge Estimation Method using Continuously Observed Water Level Data in a Gravel Bed River -Case Study of the Dal Cheon River-)

  • 이찬주;김지성;김치영;김동구
    • 한국수자원학회논문집
    • /
    • 제41권5호
    • /
    • pp.503-515
    • /
    • 2008
  • 본 연구에서는 연속적인 수위 자료를 이용하여 경사면적법으로 유량을 산정하고 그 결과를 분석하였다. 대상 하천은 괴산댐 하류의 달천으로 여울과 웅덩이를 포함하는 약 960m의 구간이다. 하상 재료의 입경을 분석하였고 이를 이용하여 3가지 조도계수값을 산정하여 유량 계산에 활용하였으며, 추가로 하천정비기본계획의 조도계수도 사용되었다. 경사면적법으로 계산된 유량은 댐 방류량과 비교되었다. 댐 방류량과 비교한 상대오차는 조도계수에 큰 영향을 받는 것으로 나타났으며, 연구 대상 구간에 적절한 조도계수는 0.042 이상인 것으로 나타났다. 대상 구간의 평균하상 경사보다 완만한 수면경사를 갖는 계산 구간에서는 구간 전체의 조도계수보다 낮은 조도계수를 사용할 경우 유량 오차가 적었으며, 수면경사가 평균하상경사보다 급한 구간에서는 조도계수를 크게 사용하여야 상대오차가 감소하는 것으로 나타났다. 하도의 전체적인 하상경사를 고려하여 조도계수를 설정할 경우에는 수면경사가 완만한 구간과 급한 구간을 모두 포함하도록 전체 계산 구간을 설정하는 것이 적절한 것으로 나타났다. 500 cms 이상의 유량에서는 실측 유량과의 상대 오차가 일정해지므로, 비교 유량 측정이 이루어질 경우 조도계수를 검증한 후, 경사면적법을 적용함으로써 간접 유량측정 결과의 정확도를 높일 수 있을 것으로 판단된다.

집중호우시 군사시설물이 설치된 사면의 안정성평가에 관한 연구 (A Study on the Slope Stability near Military Facility in Rainfall)

  • 이승호;황영철
    • 한국지반환경공학회 논문집
    • /
    • 제5권4호
    • /
    • pp.47-56
    • /
    • 2004
  • 본 연구는 군사시설물 밀집지역에서 발생하는 산사태의 여러 원인을 분석하고 일반 설계에 적용되는 평가기준과 비교하여 군 실정에 적합한 사면붕괴 안전도 평가기준을 제시하고자 한다. 사면붕괴 발생을 예측하기 위해서 강우강도와 사면붕괴 발생과의 관계를 분석하였으며, 사면붕괴 안전성평가 기준표를 이용하는 것을 제시함과 아울러 강원산간 ${\bigcirc}{\bigcirc}$지역에서 발생한 사면붕괴의 발생요인이 되는 강우, 지형, 지질 등의 특성을 파악하고, 군부대 주둔지역에서 나타나는 사면붕괴의 파괴현상과 지역적인 특성을 구명하고자 한다.

  • PDF

태화강 유역의 경사와 절봉면 분석 (A Study on Slope Angle and Summit Level Analysis of the Taehwa River Basin)

  • 김주환
    • 대한지리학회지
    • /
    • 제40권
    • /
    • pp.15-29
    • /
    • 1989
  • 특정지역의 지형은 지질적인 제여건을 반영하고 있으므로 지질과 지형과의 관계를 밝히는데는 다방면에 걸친 연구분석이 이루어져야 한다. 한국 남동지대에 발전하는 지질구조중 소증 양산절층, 동래절층 등의 지질구조는 그 지역의 구조운동을 밝히는 중요한 지표가 될 뿐아니라 지형발달에도 크게 영향을 미치고 있어 지형학적으로도 관심의 대상이 되고 있다. 본 연구의 목적은 태화강 유역의 경사와 절봉면을 분석함으로서 양산절층과 그 부근에 발달한 지질구조가 하천지형의 발달에 어떠한 영향을 미치고 있는가를 밝하는데 필요한 기초자료를 제공하려는 것이다.

  • PDF

Analysis of factors affecting vegetation cover for stabilization of granite weathered soil forest road cut slopes

  • Seong-Man Kim;Sung-Min Choi;Ye Jun Choe;Yun-Jin Shim;Joon-Woo Lee
    • 농업과학연구
    • /
    • 제49권4호
    • /
    • pp.809-819
    • /
    • 2022
  • This study was conducted to improve the stability of cut slopes of forest roads in granitic weathered soil areas. The study area is a national forest road (road length 28.48 km) in Pyeongchang-gun, Gangwon-do. After data collection, a statistical analysis was performed using IBM SPSS (Ver. 26.0). First, the correlation analysis showed that structure, slope position, soil erosion, slope, and aspect (N, S) were correlated with vegetation coverage (p < 0.05). Elapsed years, slope distance, and aspect (E, W) were found to have no correlation with vegetation coverage. (p > 0.05) Second, one-way ANOVA and Kruskal-Wallis test results showed that vegetation coverage was worse when the slope was located at the top or the middle of the slope than at the bottom of the slope. In addition, the site with sheathing and gabions showed good vegetation coverage when compared with the site without structures. In the case of soil erosion, areas with severe damage and moderate damage showed worse vegetation coverage. Therefore, it is necessary to strengthen the slope angle of the cut soil of the granitic weathered soil area from 1 : 0.5 - 1.2 to 1 : 0.8 - 1.5. In addition, structures such as sheathing and gabions should be installed on granitic weathered land.

Static and quasi-static slope stability analyses using the limit equilibrium method for mountainous area

  • Hosung Shin
    • Geomechanics and Engineering
    • /
    • 제34권2호
    • /
    • pp.187-195
    • /
    • 2023
  • Intensive rainfall during the summer season in Korea has triggered numerous devastating landslides outside of downtown in mountainous areas. The 2D slope stability analysis that is generally used for cut slopes and embankments is inadequate to model slope failure in mountainous areas. This paper presents a new 3D slope stability formulation using the global sliding vector in the limit equilibrium method, and it uses an ellipsoidal slip surface for static and quasi-static analyses. The slip surface's flexibility of the ellipsoid shape gives a lower FS than the spherical failure shape in the Fellenius, Bishop, and Janbu's simplified methods. The increasing sub-columns of each column tend to increase the FS and converge to a steady value. The symmetrical geometric conditions of the convex turning corners do not indicate symmetrical failure of the surface in 3D analysis. Pseudo-static analysis shows that the horizontal seismic force decreases the FS and increases the mass volume at the critical failure state. The stability index takes the FS and corresponding sliding mass into consideration to assess the potential risk of slope failure in complex mountainous terrain. It is a valuable parameter for selecting a vulnerable area and evaluating the overall risk of slope failure.

난지도지역의 수은배출특성 연구: 배출공 내부의 농도와 배출공을 통한 수은플럭스의 관측 (Studies of Hg Concentrations and Fluxes in the Ventpipes Determined from a Large Landfill Site)

  • 김민영;김기현;조석주
    • 한국대기환경학회지
    • /
    • 제17권4호
    • /
    • pp.299-312
    • /
    • 2001
  • The analysis of vent -emitted Hg concentrations and relevant environmental parameters was made from the inlet of 42 ventpipes in Nan-Ji-Do area of Seoul during September/october of 2000. Using these data, the fluxes of Hg from the ventpipes were also derived. The mean concentration of Hg, computed using the data sets collected from 42 ventpipes, was 420$\pm$619ng m$^{-3}$ with the range of 3.45~2,952ng m$^{-3}$ . Because of large differences in concentration levels between two sectors 1 and 2 and between plain and slope areas. evaluation of the data was made by dividing them into four different categories such as plain areas of sectors 1 and 2 (and/or slope areas of sectors 1 and 2). When this classification was applied, the computed fluxes were highly different among each group with the generally enhanced fluxes in plain area relative to slope area. The computed fluxes were then used to make comparative analysis of different source processes in the study area.

  • PDF