• Childhood Kidney Diseases
• /
• v.14 no.1
• /
• pp.22-31
• /
• 2010

Purpose : This study was performed to evaluate the relationship between glomerular basement membrane (GBM) alterations to epithelial cell (EpC) structure and renal function in Alport Syndrome (AS) patients. Methods : Fifteen patients diagnosed with AS (4-26yrs) were examined. The GBM in AS was categorized as : C1) normal, C2) minor alterations (widening of lamina rara interna or externa without lamina densa change), C3) nonspecific splitting of lamina densa, C4) basket-weaving pattern of lamina densa splitting. The length of each GBM portion along the epithelial side was measured on the systematically obtained electron microscopic photographs. Furthermore to obtain an objective assessment of the degree of glomerular EpC foot process change, the number of slit pores along $10\;{\mu}m$ of peripheral GBM in each category was obtained. Results : The percentage of normal GBM portion (C1) correlated inversely with daily protein excretion (g/day/$m^2$, P<0.05) and sum of the percentage of abnormal GBM portion (C2+C3+C4) had direct correlation with daily protein excretion (g/day/$m^2$, P<0.05). There were no significant relationships between the percentages of other categories of GBM alterations and creatinine clearance or protein excretion. There were no significant relationships between of creatinine clearance in relation to normal GBM(C1) portion as well as that in relation to sum of the percentage of abnormal GBM portion (C2+C3+C4). GBM abnormality did not correlate with age at biopsy. Conclusion : The extent of GBM structural abnormality is related to proteinuria in AS but the epithelial response is uniform even though the GBM ultrastructural lesions are not.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.4
• /
• pp.339-347
• /
• 2002

An in-situ experiment was performed to evaluate the pullout resistance capacity of chains which is used as a reinforcement of reinforced earth wall. It was also considered that chain was combined with a bar or L-type steel angle by the transverse reinforcement member in the experiment. About 80 pullout tests were peformed with varying the lengths of chain(2.0m, 2.5m, and 3.0m), the combination of each transverse members(chain only, chain＋bar, or chain＋angle), and the vertical placement of reinforcements. In the case that uses a chain only and a chain combined with bar, the maximum displacement was about 150mm and load continuously increased to the ultimate tensile strength of chain, and then tension failure of chains occurred. But in the case of a chain combined with angle, the displacement decreased to about 100mm and so it was expected that this combination can constrain the displacement of chain. On the other hand, comparing the yielding pullout load measured in the field to that calculated by theoretical equation, it is shown that measured values are 1.2~3.0 times greater than those of calculated values according to the length of chain, normal vertical stress, and the combination of chain with transverse members. However, the difference in the increment of yielding pullout load between bar and angle is not clear but it appears almost the same increment. It is expected that chain can be safely used as reinforcements of reinforced earth wall, although a theoretical estimation of the pullout resistance capability of chain is too conservative.

• Journal of the Korean Society of Costume
• /
• v.56 no.4 s.103
• /
• pp.65-81
• /
• 2006

This is the study on the costumes of Parthian Period in Persia which had powerful influences on the Occidental and Western cultures in B.C 3 to A.D 3. With different types of Parthian costumes in each period, this study shows what types of costumes people used to wear and how they were co-related with its surrounding cultures. The ancient costumes of Korea had something to do with the elements of the Northern part at that time. To make an intensive study of Korean ancient costumes, these Parthian costumes which are known to those of northern nomadic tribes are studied to provide basis elements for study between the Korean styles and the exotic styles. The basic forms of the Parthian styles were jackets and trousers. They consisted of three kinds of jackets such as those to be adjusted In the front, tunics and coats. As for trousers, they were divided into three types such as those with horizontal pleats, round-side pleats and vertical pleats. 1) The jacket to be adjusted in the front was long enough to reach the hip and fit the body reasonably tight, and its neckline was shaped into V-type. It was a very popular style among the people of high and low classes. 2) The tunics had narrow sleeves. It was a one-piece pattern which reached the knees. It was settled with a belt on the waist. Its neckline was shaped into the round but its slit was not cleat. Its styles were into tight-fit and drapery ones. 3) The coats were almost similar to the jacket to be adjusted in the front with short length, but they were entirely long and open. They appeared later than the short jackets and the people of high class seemed to wear these styles. 4) 1'rousers with horizontal pleats - They had almost horizontal pleats on them, and they were a little tight. They seemed to be the early style in the Parthian period. 5) Trousers with round side-pleats - With saggy side pleats on them, these trousers had round pleats like a drapery style. This pattern was also considered Hellenistic elements shown in the Parthian costumes. The trousers consisted of the underdrawers and the leggings (called salwar or shalwar), which is thought to emphasize its functionality for its wearer to mount a horse with more ease. 6) Trousers with vertical pleats - With straight vertical pleats on them, these trousers had some volumes and bias decorations in the middle of them. These styles were thought to be worn by the ruling class of the Parthia from early to late period.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.4
• /
• pp.679-687
• /
• 2017

In this paper, a microstrip-fed triple-band monopole antenna with DGS (Defected Ground Structure) for WLAN/WiMAX applications was proposed. The proposed antenna is based on a microstrip-fed structure, and composed of two strip lines and DGS structure and then designed in order to get triple band characteristics. We carried out simulation about parameters. Adjusted the position and length of the two strips and three slits, we get the optimized parameters. The proposed antenna is fabricated on an FR-4 substrate of which the dielectric constant is 4.4, and its overall size is $34mm(W_1){\times}34mm(L_1){\times}1.6mm(t)$, and its proposed antenna size is $17.0mm(W_6){\times}30.75mm(L_3+L_4+L_9)$. From the fabricated and measured results, return loss of the proposed antenna satisfied return loss -10dB bandwidth 360 MHz (2.335~2.695 GHz), 645 MHz (3.37~4.015 GHz) and 1,770 MHz (5.14~6.91 GHz). And measured results of gain and radiation patterns characteristics displayed for operating bands.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.1
• /
• pp.25-33
• /
• 2010

The matching condition at a perforated wall with vertical slits involves the permeability parameter, which can be calculated by two different methods. One expresses the permeability parameter in terms of energy dissipation coefficient and jet length at the perforated wall, being advantageous in that all the related variables are known, but it gives wrong result in the limit of long waves. The other expresses the permeability parameter in terms of friction coefficient and inertia coefficient, giving correct result from short to long waves, but the friction coefficient should be determined on the basis of a best fit between measured and predicted values of such hydrodynamic coefficients as reflection and transmission coefficients. In the present study, an empirical formula for the friction coefficient is proposed in terms of known variables, i.e., the porosity and thickness of the perforated wall and the water depth. This enables direct estimation of the friction coefficient without invoking a best fit procedure. To obtain the empirical formula, hydraulic experiments are carried out, the results of which are used along with other researchers' results. The proposed formula is used to predict the reflection and transmission coefficients of a curtain-wall-pile breakwater, the upper part of which is a curtain wall and the lower part consisting of a perforated wall with vertical slits. The concurrence between the experimental data and calculated results is good, verifying the appropriateness of the proposed formula.

• Journal of Biomedical Engineering Research
• /
• v.20 no.1
• /
• pp.107-113
• /
• 1999

The purpose of this study was to develop a miniature imaging gamma probe with high performance that can detect small or residual tumors after surgery. Gamma probe detector system consists of NaI(Tl) scintillator, position sensitive photomultiplier tube (PSPMT), and collimator. PSPMT was optically coupled with 6.5 mm thick, 7.62 cm diameter of NaI(Tl) crystal and supplied with -1000V for high voltage. Parallel hexagonal hole collimator was manufactured for characteristics of 40-mm hole length, 1.3-mm hole diameter, and 0.22 mm septal thickness. Electronics consist of position and trigger signal readout systems. Position signals were obtained with summing, subtracting, and dividing circuit using preamplifer and amplifier. Trigger signals were obtained using summing amplifier, constant fraction discriminator, and gate and delay generator module with preamplifer. Data acquisition and processing were performed by Gamma-PF interface board inserted into pentium PC and PIP software. For imaging studies, flood and slit mask images were acquired using a point source. Two hole phantom images were also acquired with collimator. Intrinsic and system spatial resolutions were measured as 3.97 mm and 5.97 mm, respectively. In conclusion, Miniature gamma probe images based on the PSPMT showed good image quality, we conclude that the miniature imaging gamma probe was successfully developed and good image data were obtained. However, further studies will be required to optimize imaging characteristics.

• Journal of Fashion Business
• /
• v.3 no.4
• /
• pp.147-160
• /
• 1999

This paper is intended to compare and analyze the fashion trends that were introduced in the recent shows, held abroad and in Korea, so as to investigate how well the designers in Taegu and Kyungbuk (TK) area are keeping up with the international vogue. The research has done, analyzing Pret-a-Porter in Paris and the three events held in the TK area in 1997 -The Taegu Collection, Kyungbuk Fashion Festival and Textile & Apparel Fair and using reference pictures and documentary records. In order to investigate the trends the research is divided by four groups which are the silhouette, the detail, the color and the Fashion image and has done with the help of three postgraduate students. The results are as follows. 1. The Silhouette The slim-line has the greatest importance in the silhouette analysis of the recent collections. Like Elongated and Fit & Flare, tight-fitting and female-line were also appeared quite a lot. Compared with foreign collection, Korean collections put the bigger importance on the slim-line. 2. The Detail The printings, using paintings and plant-logos had the large portion of the accessories in both foreign and Korean collections. Draw string and wrap style were also presented a lot. Especially, at the Korean collections, layerd, corsage, and craft accent were emphasized, too. As for the necklines the similarity was found over the four events considering. Camisole neckline and halter neck were presented the most, and bared top, Vneckline, boat and low-neck which can highlight the feminity were often appeared as well. Considering collars, tailored and peaked collars which are frequently used for the jackets, were usually shown at the collections. Like convertable, shirts, wing and Italian collar, the collars that can be applied for the sports wears were presented a lot. Virtually no variation of design was found in the sleeve analysis. While set-in-sleeve and sleeveless were found commonly, not so many ornaments were added to the sleeves. The ankle and knee length for the pants and skirts were common. Furthermore, including the micro-mini, showing extremely feminine style the mini-style had the 20% portion of the skirt-length. Unbalanced lengths, using bias-cut were presented quite a lot on the runways. Deep slit skirts, wide pants and irregular hem skirts were in vogue. On the runways of Paris, more than 21% of the design was the burmuda pants. 3. The Color Red and Blue were in vogue in the four collections considering. Sometimes, yellowish was combined in Korean collections. Black and pale tone were appeared to be in fashion also with light grayish, moderate and deep tone. 4. The Fashion image As for the fashion image, feminine-decorative trend amounted to the large percentage in korean collections. At the foreign collection feminine-decorative trend and feminine trend were predominant, then mannish trend and simple trend were apeared equally. The research shows that TK area and foreign collections are fairy similar, which means that the designers in TK area have been making their efforts to satisfy the clients who have the international minds. However, compared with foreign collections, TK collections were apprered to be strongly inclined to only a few trends. Consequently the season trends are not as diverse as the foreign trends, which cannot satisfy the fashion taste of the clients in TK area. The local designers should know the tendency and the taste of the clients and make the more efforts to read local clients' mind.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.4
• /
• pp.318-325
• /
• 2011

Pitch pine (Pinus rigida Miller) retaining walls using Steel bar, of which the constructability and strength performance are good at the construction site, were manufactured and their strength properties were evaluated. The wooden retaining wall using Steel bar was piled into four stories stretcher and three stories header, which is 770 mm high, 2,890 mm length and 782 mm width. Retaining wall was made by inserting stretchers into Steel bar after making 18 mm diameter of holes at top and bottom stretcher, and then stacking other stretchers and headers which have a slit of 66 mm depth and 18 mm width. The strength properties of retaining walls were investigated by horizontal loading test, and the deformation of structure by image processing (AlCON 3D OPA-PRO system). Joint (Type-A) made with a single long stretcher and two headers, and joint (Type-B) made with two short stretchers connected with half lap joint and two headers were in the retaining wall using Steel bar. The compressive shear strength of joint was tested. Three replicates were used in each test. In horizontal loading test the strength was 1.6 times stronger in wooden retaining wall using Steel bar than in wooden retaining wall using square timber. The timber and joints were not fractured in the test. When testing compressive shear strength, the maximum load of type-A and Type-B was 130.13 kN and 130.6 kN, respectively. Constructability and strength were better in the wooden retaining wall using Steel bar than in wooden retaining wall using square timber.

• Childhood Kidney Diseases
• /
• v.6 no.2
• /
• pp.169-177
• /
• 2002

Purpose: Hypertension accelerates the progression of chronic renal disease, whether it results from, or causes, the renal disease. Therefore, the control of hypertension is one of the important factors that retard the rate of renal deterioration. We compared the effects of different antihypertensive agents on renal function and glomerular morphology In subtotal nephrectomized rats. Materials and methods: After induction of chronic renal failure with 5/6 nephrectomy, the rats were divided into three groups; control group (Group C), enalapril group (Group E), and nicardipine group (Group N). Systolic blood pressure was measured by tail cuff method every 4 weeks until 12 weeks after nephrectomy. At 12 weeks after nephrectomy, all rats were placed in metabolic cages for 24 hour urine collections to measure urinary protein and creatinine excretion. After urine collection and blood sampling for serum creatinine, all rats were sacrificed. The renal tissue was processed for morphometric study with light microscope and electron microscope. Results: 1. The blood pressure of Group C increased progressively, but both enalapril and nicardipine prevented the development of hypertension, and the two drugs were equally effective in maintaining normal blood pressure throughout the study. 2. Twenty-four hour urinary protein excretion was lower in Group E compared to Group C and Group N 3. Mesangial expansion score in both treated groups were significantly lower than the control group. Mean glomerular volume in Group E was significantly reduced compared to Group C and Group N. There was no significant difference in mean glomerular volume between Group C and Group N. 4. There was no significant difference in podocyte structural changes, estimated by filtration slit length density, among control, enalapril and nicardipine treated groups. Conclusion: Control of hypertension with enalapril or nicardipine afforded considerable protection from mesangial expansion in the rat remnant kidney model. But protein excretion and glomerular growth were significantly reduced in Group E compared to Group N. There was no significant difference in podocyte structural changes among the 3 groups.

• Journal of Fashion Business
• /
• v.2 no.3
• /
• pp.137-156
• /
• 1998

In this study, the researcher studied the historical background, and the traditional culture about dress and ornament of Yunnan Province of China, The results of the study are as follows. 1. Dress and personal ornaments of the Va peoples vary with the locality. Their traditional dress and adornment is characterized by those in the Ximeng area. Men usually wear black or dark blue collarless jackets and black and dark blue loose and short bagged trousers with folding waist. Women usually wear close-fitting sleeveless pullover blouses with V-shaped necks and straight skirts with patterns of red and black cross stripes. 2. Jingpo men have changed to wear shirts with button down the front and trousers. They also entwine white turbans with red bobbles on both ends, and carry diagonally long knives, firelocks and red woolen figured satchels on their shoulders. Women usually wear black velvet blouses with silver bowl-shaped ornaments and chains around collars and on the fronts. They also wear red straight skirts with overlapped slit on the right, waistbands and waist hoops made of rattan and bamboo. 3. The Naxi nationality has a long history and excellent traditional culture. In modern times, women like to wear red, blue or purple laced blouses, long double-layered pleated skirts, waistbands and embroidered shoes. They wear their hair in buns with either hats or kerchiefs over them. While working or going out, they put on their "seven-star" capes made of sheepskin and embroidered with two big circles and seven small ones, while is a symbol of their frog totem. 4. The dress and adorment of the Jinuo people is simple, elegant and has its own unique characteristics. Men usually wear white buttonless shirts with round necks and an opening on the front, knee-length bagged trousers and legging. They wear cloth turbans, earrings and also put small bamboo or silver pipes in the holes of their earlobes. Women wear short buttonless blouses with round necks and seven coloured stripes and thin tight-fitting or embroidered triangular underwear. 5. The dress and ardorment of the Benglong (De' ang) nationality has its own strong national colour. Most of the men wear jackets with buttons arranged diagonally on the front, loose, short trousers and black or white turbans. Some young men like to wear eardrops and silver necklaces. Women's dress and adornment differs according to various branches. For example, the women of the Bielie and Liang branches have their hair shaved and wear black turbans. They use large square silver tablets as buttons and wear blue or black blouses with buttons down the front. 6. Oai men usually wear trousers, white or blue cloth turbans and round-necked shirts with buttons down the front or arranged diagonally on the front. Women usually wear long straight skirt and blouses. But dress and adornment varies in regions. 7. The Bai nationality dress and adornment has unique national style. The dress fabrics are mainly cotton cloth, silk and velvet. Men usually wear red velvet vests over white shirts with buttons down the front or black velvet vests over light blue shirts. They also wear white of blue turbans and carry satchels with beautiful embroidered designs over their shoulders. Women usually wear red velvet vests over white blouses, or black vests over light-coloured blouses.