• 대한족부족관절학회지
• /
• 제8권1호
• /
• pp.92-96
• /
• 2004

Purpose: To analyze the clinical and radiological results of the operative treatment in the avulsion fracture on the base of the fifth metatarsal. Materials and Methods: We studied retrospectively, 11 patients of avulsion fracture on the base of the fifth metatarsal operated and followed over 1 year, from February 2000 to May 2002. There were eight men and three women and the average age was 39 years old. The mean follow up period was 14 months. Ten cases were slip-down and one case was fall from a height injuries. We used the modified Foot Score by Wiener for the clinical evaluation, and analyzed the time of union and state of reduction radiologically. Results: In clinical results, we had ten excellent and one good cases by the modified Foot Score at last follow-up. In radiologic results, the complete bony union was achieved in all cases and the duration of the bony union was 37 days in average. Conclusion: We had good result for the avulsion fractures on the base of the fifth metatarsal treated by the operation. This study shows the operation was recommended for the moderate and severe displacement of the avulsion fractures on the base of the fifth metatarsal.

• 대한금속재료학회지
• /
• 제49권7호
• /
• pp.535-540
• /
• 2011

The tensile and creep behaviors of Alloy 263, which is a wrought Ni-base superalloy used for gas turbine combustion systems, was studied. Anomalous increase of yield strength and abrupt decrease of elongation with increasing temperature were observed after tensile testing at an intermediate temperature. Elongation of the superalloy decreased as the temperature increased to and above 540$^{\circ}C$, and it reached a minimum value at 760$^{\circ}C$. It was found that creep strain was also very low at the same temperature. Inhomogeneous deformation with intensive slip bands was observed in the specimens tested at low temperature. A thermally-assisted dislocation climb process was regularly conducted at high temperature. Twinning was found to be an important mechanism of both tensile and creep deformations of the superalloy at an intermediate temperature where ductility minimum was observed.

• Steel and Composite Structures
• /
• 제22권2호
• /
• pp.353-368
• /
• 2016

This paper extends our recent work on the fatigue behavior of stud shear connectors in steel and recycled tyre rubber-filled concrete (RRFC) composite beams. A series of 16 fatigue push-out tests were conducted using a hydraulic servo testing machine. Three different recycled tyre rubber contents of concrete, 0%, 5% and 10%, were adopted as main variable parameters. Stress amplitudes and the diameters of studs were also taken into consideration in the tests. The results show that the fatigue lives of studs in 5% and 10% RRFC were 1.6 and 2.0 times greater of those in normal concrete, respectively. At the same time, the ultimate residual slips' values of stud increased in RRFC to highlight its better ductility. The average ultimate residual slip value of the studs was found to be equal to a quarter of studs' diameter. It had also been proved that stress amplitude was inversely proportional to the fatigue life of studs. Moreover, the fatigue lives of studs with large diameter were slightly shorter than those of smaller ones and using larger ones had the risk of tearing off the base metal. Finally, the comparison between test results and three national codes was discussed.

• 한국해양공학회지
• /
• 제19권2호
• /
• pp.82-89
• /
• 2005

This study deals with the development of the extended Kalman filter(EKF) algorithm for the localization of underwater mining vehicles. Both simulation and experimental studies in a test bed are carried out. For the experiments, a scale dawn tracked vehicle is run in a soil bin containing cohesive soil of bentonite-water mixture. To develop the EKF algorithm, we use a kinematic model including the inner/outer track slips and the slip angle for the vehicle. The measurements include the inner and outer wheel speeds from encoders, the heading angle from a compass sensor and a fiber optic rate gyro, and x and y coordinate position values from a vision system. The vision sensor replaces the LBL(Long Base Line) sonar system used in the real underwater positioning situations. Artificial noise signals mimicking the real LBL noise signal are added to the vision sensor information. To know the mean slip values of the tracks in both straight and cornering maneuver, several trial running experiments are executed before applying the EKF algorithm. Experimental results show the effectiveness of the EKF algorithm in rejecting the sensor measurements noise. Also, the simulation and experimental results show close correlations.

• 한국재료학회지
• /
• 제17권4호
• /
• pp.192-197
• /
• 2007

The effects of immersion time in the liquid nitrogen on the behavior of aluminum alloys used for the hydrogen storage tank of auto-mobile at cryogenic temperature were investigated. With increasing immersion time in the liquid nitrogen, the elongation of AI 5083 alloy at cryogenic temperature decreased because of non-uniform fracture of precipitates on the grain boundary, and the serration also occurred because of discontinuous slip due to rapid decreasing of the specific heat. The mechanical properties of AI 6061 alloy at cryogenic temperature were characterized by uniformed yield strength, tensile strength and elongation regardless of the immersion time in the liquid nitrogen. These mechanical properties of aluminum alloys at cryogenic temperature were interpreted by the strength of grain boundary and the slip deformation behavior.

• 폴리머
• /
• 제37권5호
• /
• pp.642-648
• /
• 2013

이상소음은 고분자 판재가 상호간에 미끄럼 운동을 할 때 마찰에 의한 스틱-슬립 메카니즘에 의하여 발생한다. 본 연구에서는 실험적 방법을 통하여 이상소음을 줄이기 위하여 가전제품에 많이 사용되는 ABS, PP, MIPS, POM 고분자 소재에 대하여 ABS를 기초로 하여 소재간의 조합이 이상소음에 미치는 영향을 알아보았다. 소재간 마찰에 의한 이상소음을 평가하기 위한 실험방법과 장치를 제안하였으며, 실험변수로는 소재의 조합뿐만 아니라 고분자 판재의 표면 거칠기, 수직 접촉하중, 상대운동 속도 등을 두었다. 본 연구를 통하여 이상소음 저감을 위해서 ABS 소재와 POM 소재 조합이 가장 좋음을 알 수 있었으며, 다른 재료조합에 대한 결과도 상호 비교하였다.

• 한국조리학회지
• /
• 제15권1호
• /
• pp.296-308
• /
• 2009

이인자의 연구에 따르면 우리나라 조리사 수는 120만 명을 넘는다. 그럼에도 조리사 환경과 관련된 연구는 찾아보기 어렵다. 그렇지만 현재 조리사들이 작업 현장에서 신고 있는 신발을 조사하여 보기로 하였다. 대부분의 조리 작업 현장에서 일어나는 사고의 유형은 신고 있는 신발에서 기인한 것으로 보고, 본 연구는 조리 종사원들이 작업 환경에 적합한 신발에 관한 연구로서 본 신발을 개발함으로써 조리 현장에서 일어나는 미끄럼 등과 같은 잠재 위험에서 조리 종사원들을 보호하고 피로감을 줄여 업무 효과를 높이려는데 그 목적이 있다. 조리화에 대한 연구가 없기 때문에 조리 종사원들이 현재 신고 있는 안전화를 네 가지 요소에 중점을 두고 실험하였다. 이 네 가지 요소 실험을 바탕으로 무게와 미끄러움 정도, 인열 강도, 박리 강도를 실시한 결과에 따라 새롭게 만들어질 조리화에 대한 기준을 제시하였다. 그 결과로서 조리화의 무게는 체중에 1% 내외로 만들어져야 하며, 미끄러짐 저항도는 0.50 $\mu$, 인열 강도는 50.0 N/mm, 박리 강도는 3.0 kg/cm의 기준치를 제시하였다.

• 한국지반환경공학회 논문집
• /
• 제8권2호
• /
• pp.11-18
• /
• 2007

철도 연변 사면의 활동은 열차 노선의 사용성과 안전성에 상당한 영향을 미치고 있다. 따라서 사면안정 문제는 철도 노선 운용에 있어 큰 관심사항이다. 본 연구에서는 철도연변 사면의 활동이 발생하는 조건에서의 강우정보를 분석하였으며 침투해석과 한계평형해석을 통하여 강우를 고려한 사면의 안정성 분석 기법을 제시하고자 한다. 강우량 분석결과 사면활동이 발생하기까지 누적강우량은 150~500mm 사이에 분포하고 있었고 강우지속시간은 3~24시간으로 나타났다. 분석된 강우량을 바탕으로 무한사면 조건에서의 침투해석과 강체거동 분석을 수행하고 무한사면의 심도는 2m를 가정하였으며 다중의 파괴면은 2m 심도로부터 16.7cm 간격으로 모델링이 되었다. 한계파괴심도인 2m는 안전율이 수렴하는 심도이다. 해석결과 기존의 사면안정성 평가 기준에서 고려하고 있는 우기시 해석조건의 결과보다 현실적인 안전율을 보였다. 또한 누적강우량, 강우지속시간, 안전율을 축으로 하는 3차원 공간상에 안전율 변화 추이를 도시한 결과 강우를 고려한 사면의 안전성 분석 시 일반적으로 고려하는 강우강도 뿐만 아니라 누적강우량(강우지속시간) 또한 고려되어야 할 것으로 판단되었다.

• 산업기술연구
• /
• 제24권A호
• /
• pp.239-250
• /
• 2004

Numerical analysis were performed to investigate the stability and internal movement of tunnel located beneath the base of abutment of bridge according to the method of supporting tunnel. Two supporting methods of the multi-staged grouting method with steel pipes and the large diameter of pipe supporting method were used in the centrifuge model tests. The slip form of model lining, specially built to simulate the process of tunnel excavating under the condition of accelerated g-level, was used in the centrifuge model tests. Four centrifuge model tests were performed, changing the supporting methods of the multi-staged grouting method with steel pipes and the large diameter of pipe supporting method and the location of model abutment base of bridge. For internal displacement of tunnel, movements of the crown. The left and the right sides of spring line were measured during the proceeds of excavating tunnel in centrifuge model tests. Test results were compared with numerically estimated values of internal displacement of tunnel by using the commercially available FEM software of PENTAGON-3D. It was found that they were in good agreements and the large diameter of pipe supporting method was more stable than the multi-staged grouting method with steel pipes with respect to the internal movement of tunnel.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.281-284
• /
• 2007

The effect of Ca addition on the microstructure evolution and deformation behavior of AZ31 magnesium alloy produced by hot extrusion was investigated. For this purpose, Ca was added into AZ31 melts to the level of 0.7 and 2.0 wt.% Ca. Then, AZ31 base alloy and Ca modified AZ31 alloys were extruded at $383^{\circ}C$. Ca added alloys showed finer grain size and increased hardness value rather than AZ31 base alloy. After isothermal hot compression, the shape of tested specimen exhibited a noticeable anisotropy due to the crystallographic texture effect. The ratio of major and minor axes of ovality was not directly related to test condition and Ca amount. Flow stress level increases with the increase of Ca addition at temperature below $300^{\circ}C$ because of fine microstructure. However, at high temperature and low strain rate region ($400^{\circ}C$ and $10^{-3}s^{-1}$), reverse tendency was observed since main deformation mechanism changes from dislocation slip to grain boundary sliding or diffusional process at high temperature.