• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.788-793
• /
• 2002

Hybrid type slim tilt actuator and 6-wire supported are developed for DVD recording in the optical disc drive of notebook PC, which can compensate the inclination of disc and objective lens. The hybrid actuator uses the actuating method of moving coil in the focus and track direction and that of moving magnet in the tilt direction. Comparing with 6-wire supported actuator and hybrid type actuator, we can choose an actuator for slim super combo pickup. Two actuator are designed through the modal analysis and magnetic field analysis and experimental results shows dynamic characteristics. Finally, it is verified that the actuator can compensate the disc tilt of ${\pm}0.4^{\circ}$.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.151-154
• /
• 2004

To use the SLIM for servo system, the exact account of thrust about the initial speed is needed, but analyzing by equivalent circuit analyzing methode such as rotary induction motor, the error occurs because of the end effect. So, we applied the equivalent circuit considering the end effect of SLIM in this paper. The current control system is advanced the space vector pulse width modulation by using high arithmetic performance microprocessor such as DSP. In this paper, we use the dynamic characteristic analyzing methode that can calculate efficiently the end effect by using equivalent circuit methode in the operating SLIM system modeling and examine the output characteristics of SVPWM with PI controller.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.4
• /
• pp.395-403
• /
• 2002

The advanced space vector PWM is Implemented for the control system using high arithmetic performance microprocessor such as DSP. It is difficult to realize the complicate SLIM which is applied to SVPWM system, but widely used in vector control system or servo control system for AC motor because of its high performance in current control. In this paper, we use the dynamic characteristic analyzing method that can calculate efficiently the end effect by using equivalent circuit methode in the operating SLIM system modeling and examine the dynamic characteristics of SVPWM with PI controller.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.2
• /
• pp.131-134
• /
• 2011

In this study, we propose an optimal design and new fabrication method for a slim tactile sensor. Slim tactile sensor can detect 3-axial forces and has suitable flexibility for intelligent robot fingers. To amplify the contact signal, a unique table-shaped structure was attempted. A new layer-by-layer fabrication process for polymer micromachining that can make a 3D structure by using a sacrificial layer was proposed. A table-shaped epoxy sensing plate with four legs was built on top of a flexible polymer substrate. The plate can convert an applied force to a concentrated stress. Normal and shear forces can be detected by combining responses from metal strain gauges embedded in the polymer substrate. The optimal positions of the strain gauges are determined using the strain distribution obtained from finite element analysis.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.214-217
• /
• 2008

We present an ultra-slim LCD module for 40-inch FHD TV. By employing edge-lit backlight system, module thickness of 10mm is achieved. To satisfy the luminance spec of 450 nits in FHD resolution, it is critical to adopt high efficient LED and optical components.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.465-470
• /
• 2006

An experimental investigation is carried out to study 2-phase vertically upward hydraulic transport of solid particles by water and non-Newtonian fluids in a slim hole concentric annulus with rotation of the inner cylinder. Rheology of particulate suspensions in viscoelastic fluids is of importance in many applications such as particle removal from surfaces, transport of proppants in fractured reservoir and cleaning of drilling holes, etc. In this study a clear acrylic pipe was used in order to observe the movement of solid particles. Annular fluid velocities varied from 0.2 m/s to 3.0 m/s. Pressure drops and average flow rate and particle rising velocity are measured. For both water and 0.2% CMC solutions, the higher the concentration of the solid particles is, the larger the pressure gradients become.

• Journal of Korean Association for Spatial Structures
• /
• v.16 no.4
• /
• pp.133-140
• /
• 2016

SLIM AU(A plus U-shaped) composite beam had been developed for not only reducing the story height in residential and commercial building, but also saving the cost of floor construction. The structural performance and economic feasibility was sufficiently approved by means of structural experiments and analytical studies. Even though fire resistance of the SLIM AU composite beam was evaluated throughout furnace fire test, the fire performance of the composite beam using finite element analysis is not analysed yet. Therefore the predictions of fire resistance simulations with loading as well as temperature distribution of the composite beam are summarized in this paper.

• Proceedings of the KIEE Conference
• /
• 2004.04a
• /
• pp.9-11
• /
• 2004

In this paper, a new design method to improve efficiency of single-sided linear induction motor(SLIM) is presented. The method utilizes the space harmonic analysis, the equivalent circuit analysis and numerical analysis method. This paper deals with calculation of the design dimension of primary and secondary and the equivalent circuit parameters for SLIM. Finally, analytical results for SLIM designed are verified by FE results.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.676-681
• /
• 2003

In this paper, we investigated the disc warping in high-speed slim-type optical disc drive. Recently, the information storage devices are increasing track density and higher rotation speed to enhance their recording capacity and their data transfer rate. Generally, ODD used in the Lap-top Computer has small inner space. So, the flow instability of inner space is rapidly increased as its higher rotation speed. An extreme case, the flow instability causes the malfunction of readout at pick-up of drives. The experiments and numerical analysis were carried out for several cases, the result shows the influence of airflow to the disc warping.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1280-1285
• /
• 2003

In the developement of LNG cargo, the current concern focuses on the slim design of insulation layer to increase the LNG carrying capacity. Not only thermal stability with BOR(Boil-Off Rate) but structual stability against the LNG weight and the sloshing phenomenon must be also considered. In this paper, we applied the stitched sandwitch composite called the 3X-Board which is stitched through the core thickness direction using glass fiber to the LNG cargo. We evaluated the thermal and structural characteristics of 3X-Board by changing the core thickness and the material, in order to explore a validity for the slim design through the finite element analysis.