• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.453-456
• /
• 2001

The thrust control characteristics of single-sided linear induction motor (SLIM) is achieved using PI controller in this paper. The trembling of air gap length between the primary winding and the secondary structure of the SLIM must be minimized in order to get quick response results. Also, the input voltage of SLIM is involved with the time harmonics because most SLIM is driven by inverter. According to the feedback linear control system, this paper describes with applying the non-linear control, speed and estimated flux algorithm. At the result of this experiment, we reached to the improvement of thrust characteristics with PI controller.

• 한국의류학회지
• /
• 제35권1호
• /
• pp.26-36
• /
• 2011

The study analyzes the development of slim-fit formal pants patterns for middle-aged men. This study suggests a new pattern that complements the problems of the existing fit on the basis of the standard nude size for middle-aged men with lower garments through the analyses of one-tuck pants patterns from 5 popular brands. As a result, the waistline is lowered by 0.8cm out of consideration for the waist circumference. The crotch extension is reduced by 1.5cm, the back crotch length is revised, the center back waist point is raised by 0.9cm, and the hip line is straightened. The slim-fit is perfected of the new lines from the thigh to knee-line.

• 대한기계학회논문집A
• /
• 제29권4호
• /
• pp.624-631
• /
• 2005

A note-book PC has become thinner in recent years, which requires the optical disc drives with small height and high memory capacity. Therefore the actuator of optical disc drives must be thinner and have disc tilt compensation function for high density memory. In this paper, the actuator with hybrid type is investigated for 3-axis ultra-slim actuator. A 3-axis ultra-slim actuator is designed by using the modal analysis of the actuator and the electromagnetic analysis of magnetic circuit to achieve dynamic characteristics. Also, magnetic force between tilt magnet and tilt yoke is investigated to and the influence on the DC sensitivity in the focus and track directions.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.45-49
• /
• 1998

In this paper, the direct thrust control of PWM Inverter-fed Single-sided Linear Induction Motor (hereinafter referred to as "SLIM") is achieved with Space Vector control and PI control. The trembling of air gap length which is occured between the primary winding core and the secondaty structure of the SLIM must be minimized in order to get quick response characteristic. First, voltage equations of SLIM are shown on the suitable d-q axis equivalent circuits which analyze characteristics of the thrust and the normal force. Also, modeling and analysis of the d-q axis equivalent circuits are able to make robust transient thrust from the current regulation in the equivalent circuits. These results exemplified the direct drive of SLIM with the reference speed and thrust were verified by the experiments.periments.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.208-213
• /
• 2003

A note-book PC has become thinner in recent years. And optical disc drives are required to have high memory capacity. Therefore, the actuator of optical disc drives must be thinner and have disc tilt compensation function for high density memory. In this paper, the hybrid type actuator is investigated for 3-axis ultra-slim actuator. A 3-axis ultra-slim actuator is designed by using the modal analysis of the actuator and the electromagnetic analysis of magnetic circuit to achieve dynamic characteristics and magnetic flux density for high sensitivity, respectively. Also, magnetic force between tilt magnet and tilt yoke is investigated to find the influence on the DC sensitivity in the focus and track directions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.2142-2144
• /
• 1998

We proposed the speed control of the SLIM(Single-sided Linear Induction Motor) for conveyance system by the decoupled thrust control. The voltage equations of SLIM are expressed on the suitable $\alpha-\beta$ axis by the proposed equivalent circuit, which can analyze the characteristics of the thrust and the normal force and so on. These control methods, which are the slip angular frequency control and the decoupling control for the thrust and normal force by analyzing these parameters can be successfully driven without interfering of each axis. These results exemplified the linear drive of SLIM with the reference value.

• 한국공작기계학회논문집
• /
• 제16권6호
• /
• pp.103-109
• /
• 2007

With the increase of track density, high rotational speed and the compatibility for various media in optical disk drives, the effective design to vibration reduction is very important for robust operation. Especially when a slim optical disk drive for a notebook PC is excited by a mass-unbalanced disk, internal vibration and its transmission to external case bring about severer problem than that of conventional one. In this paper a design process of a rubber mount in a slim optical disk drive for vibration reduction is presented. The characteristics of rubbery materials - hyper-elastic and visco-elastic - are measured with standard specimens. The static stiffness of a rubber mount was calculated by FEM and the dynamic stiffness is predicted with the static stiffness and the impedance test data of the standard specimen. The transmissibility tests are performed for the purpose of verification of the design process.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 하계학술발표대회 논문집
• /
• pp.72-72
• /
• 2007

• 한국산학기술학회논문지
• /
• 제12권5호
• /
• pp.2038-2047
• /
• 2011

본 논문에서는 TFT-LCD(Thin Film Transistor-Liquid Crystal Display) 제조 공정 중 Module 공정의 Slim MES(Manufacturing Execution System)를 위한 생산계획 프레임워크(framework)개발에 관해 연구한다. TFT-LCD 제조 공정 중 Module 공정의 라인 구성 및 기능은 각 제조 현장마다 차이가 있다. 본 논문은 이러한 차이를 반영하는 제조현장 맞춤형 MES를 위한 생산계획 프레임워크를 제시한다. 먼저 TFT-LCD Module 공정의 분석을 통해 생산계획 프로세스를 파악한다. 그런 다음 현장 상황 제약조건을 반영한 수리적 모델링을 제시하고 이에 대한 최적 스케줄의 도출을 사례를 통해 제시한다. 또한 현장 상황을 반영한 디스패칭(dispatching) 룰에 의한 스케줄 생성 과정을 제시하고 성능실험 결과를 제시한다. 마지막으로 Slim MES를 위한 생산계획 프레임워크 설계 과정을 제시한다.

• 대한기계학회논문집B
• /
• 제41권9호
• /
• pp.587-595
• /
• 2017

최근 들어 공조기가 슬림화 되고 따라서 열교환기의 깊이를 줄일 필요가 있다. 본 연구에서는 슬림형 알루미늄 열교환기에 적절한 루버 핀 형상을 도출하였다. 또한 도출된 루버 핀이 적용된 알루미늄 열교환기 시료를 제작하고 성능 시험을 수행하였다. 비교를 위하여 기존 열교환기에 대해서도 실험을 수행하였다. 도출된 형상의 핀 깊이($F_d$)는 10.0 mm, 루버 핏치($L_p$)는 0.9 mm, 루버 각(${\theta}$)은 $35^{\circ}$이다. 기존 시료에 비하여 신규 슬림 시료의 j 인자는 36%, f 인자는 2.3% 크게 나타났다. 따라서 열교환기 체적은 슬림 시료에서 26% 줄어들게 된다. 또한 동일 소비 동력에서의 전열량을 의미하는 $j/f^{1/3}$은 슬림 시료에서 55% 크다. 실험 데이터를 기존 상관식의 예측치와 비교하였다.