• Korean Journal of Poultry Science
• /
• v.14 no.2
• /
• pp.137-143
• /
• 1987

This study was carried out to compare the changes in the extractability, biological activity, and solubility of myofibrillar proteins and actomyosins during storage period at 4$^{\circ}C$ and -20$^{\circ}C$in pectoral. and leg muscle of broiler meat. 1. The results obtained are as fellows ; The extractabilities of myofibrillar proteins in pectoral and leg muscle were increased gradually to 7-days during storage at 4$^{\circ}C$ and decreased slightly during frozen storage at -20$^{\circ}C$. The extractabilities of actomyosins in pectoral and legmuscle were not greatly changed during cold storage and decreased gradually during frozen storage. 2. The Ca$\^$2+/-ATP ase activities of myofibrillar proteins in the both muscles were not greatly changed to 7-days during cold storage, and in the case of frozen storage, those were highest on the 2nd week, thereafter decreased with storage period. The Ca$\^$2+/-ATPase activities of actomyosins in pectoral and leg muscle were decreased sightly only frist day during cold storage and decreased gently during frozen storage. 3. Myofibrillar proteins in the both muscles were solubilized completely at 0.20M KCl in fresh meat, at 0.25M (pectoral) and 0.30M KCl (leg) in the cold storage, and at 0.30M KCl in the frozen storage. Actomyosins of both muscles were solubilized completely at 0.40M KCl in fresh meat, cold and frozen storage.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.9 no.2
• /
• pp.93-98
• /
• 2011

Saline corrosion is one of the major degradation mechanisms for stainless steel type 304 (SS304) dry storage cask during the spent fuel interim storage period. Slow strain rate test (SSRT) and neutral salt spray test (NSS) were performed at $85^{\circ}C$ and $200^{\circ}C$ with 0.5 wt% sodium chloride mist sprayed on the cold-rolled SS304 specimens of different degrees of reduction in this study. The weight changes of the NSS specimens tested at $85^{\circ}C$ for 2000 hours differed greatly from those at $200^{\circ}C$. The weight loss of NSS specimens was not significant at $85^{\circ}C$ but the weight gain decreased gradually with increasing the cold-rolled reduction. The yield strength (YS) and ultimate tensile stress (UTS) values obtained from the SSRT tests for lightly cold-rolled specimens in the salt spray environment at $85^{\circ}C$ and $200^{\circ}C$ are slightly lower than in air. But for those with 20% reductions, the specimen strengths were no longer changed by the saline corrosion. The preliminary results demonstrated that the quality and performance of cold-rolled SS304 is acceptable for fabrication of dry storage casks. However, more work on the corrosion behavior of cold-rolled stainless steel in the saline atmosphere is needed to better understand its long-term performance.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.4
• /
• pp.176-182
• /
• 2014

We intended to prepare $Mg_3Sb_2$ compound bodies through solid state reactive sintering after cold-pressing mixtures of elementary Mg and Sb powders and investigated the crystal phases of the sintered bodies according to Mg/Sb mole ratios and reaction temperatures. The $Mg_3Sb_2$ bodies sintered at the temperatures of 773~843 K showed typical crystalline phases of $Mg_3Sb_2$ compounds, but their diffraction angles in XRD patterns were slightly different along with the vertical axis of the bodies obtained. All the bottom parts of the sintered $Mg_3Sb_2$ bodies were composed of the typical crystalline phases of $Mg_3Sb_2$ compounds and their diffraction angles were completely in accord with those of the ${\alpha}-Mg_3Sb_2$ phase, when Mg : Sb = 3.15 : 1.85 at 823 K, or when the Mg moles were greater than or equal to 3.10 at 843 K. It was considered that the slightly remaining Mg phases were formed by precipitation from ${\alpha}-Mg_3Sb_2$ phases during the solidification process of liquid phase.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.12 s.148
• /
• pp.1527-1534
• /
• 2005

In order to clarify the characteristics of the thermo-physiological responses of the child and to understand the influence of the country where the child has grown up on the responses, the thermo-physiological responses of the Japanese children(J group) and the Korean children(K group) were examined. The subject wearing shorts was exposed first to a thermo neutral room$(Ta=28.5^{\circ}C)$ for 1 hour, then transferred to a cold$(Ta=22^{\circ}C)$ or a hot$(Ta=37^{\circ}C)$ room for 1 hour. The experiment was done in the climate chamber of Bunka Women's University in the summer of 1997 for Japan, and in the climate chamber in the Keimyung University in the summer of 1998 for Korea. The subjects consisted of 5 boys and 5 girls aged 7-9 years in Japan and 4 boys and 4 girls aged 7-9 years in Korea. As a result: 1) The rectal temperature increased slightly with a rise in air temperature. K group showed a slightly higher rectal temperature. 2) The skin temperature of the hand and foot decreased conspicuously during cold exposure. It was more in the K group than in the J group. 3) Relative local sweat rates were similar in the two groups at $22^{\circ}C\;and\;28.5^{\circ}C$, while they were considerably different at $37^{\circ}C$. Even perspiration was observed over the whole body in the J group but the perspiration was large in the trunk and low in the extremity in the K group. 4) The heart rate was higher in the J group than in the K group but it increased with the rise of the air temperature in both groups.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.3
• /
• pp.274-285
• /
• 1996

These experiments were conducted to evaluate the effects of seed coating with ten environmentally acceptable polymers, on germination percentage, water uptake, respiration, emergence and seedling growth characteristics. The water absorption of polymer-coated seeds in saturation condition was highest in klucel and lowest in polyvinyl pyrrolidone(PVP), and that in water was highest in klucel and lowest in maltrin. Respiration rates of polymer-coated seeds in Hwayoungbyeo and Ilpumbyeo were lower than those of none-coated seeds, and those in Daecheongbyeo and Jinmibyeo were higher than that of none-coated seeds, and those of sepiret coated seeds were higher than PVP coated seeds. The germination polimer-coated seed was reduced by one percentage by coating with seed coating machine. Germination percentage was not affected by any of polymer coating in high quality seed, but there were significant effects in low quality seed coating with waterlock, surelease 46 and sepiret significantly reduced germination some cultivars. Germination percentage after accelated ageing treatment were slightly higher most of polymer-coated seeds than in none-coated seeds, but those of sepiret-and klucel-coated seeds were lower significantly. Germination percentage of seeds coated with daran 8600, rnaltrin, sacrust and opadry were enhanced slightly under cold test other polimers reduced germination. The seedling height of polymer-coated seeds were longer than those of none-coated seeds, but those of waterlock, PVP and maltrin coating seeds were shorter, seedling hight was shortened by polimer coating under cold test. Polymer-coated seeds showed higher emergence percentage, shorter emergence time in field condition. The highest emergence percentage and the shortest emergence time was shown at 90% soil moisture content.

• Korean Journal of Food Science and Technology
• /
• v.26 no.6
• /
• pp.696-703
• /
• 1994

The purpose of this study was to investigate the gelatinization properties of potato starch heated with microwave. Two types of potato starches were prepared; In group A raw potato starch was heated with microwave and in group B potato starch was isolated from potato heated with microwave. Both groups were exposed to the microwave energy in a 560W, 2,450 MHz oven for 60, 120, 180 and 300 seconds. Gelatinization behaviour by DSC made a few differences according to the ratio of starch to water. As the microwave heating time took longer, gelatinization temperature and gelatinization $enthalpy({\bigtriangleup}H_1)$ were decreased in and melting $enthalpy({\bigtriangleup}H_2)$ was increased in group A. Whereas they were increased in group B. In both groups, maximum viscosity in gelatinization by Brabender amylogram was decreased by microwave heating. Then the peak of the maximum viscosity was shifted to higher temperature and cold viscosity was slightly increased. In group A, viscosity in gelatinization and light transmittance by NaOH was increased in initial stage and gel volume in gelatinization by KSCN was decreased. On the other hand, in group B, viscosity by alkali was slightly decreased, but light transmittance by NaOH was almost never changed. Gel volume is decreased like group A.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.05a
• /
• pp.141-145
• /
• 2008

In this paper, non working day for the construction project in Cheongju region considering weather condition for 30 years from 1971 to 2000 and 10 years from 1991 to 2000 as statistical periods was estimated. In Cheongju region, there was no remarkable difference between them because non working day for outside and half outside work was 157days and for interior work 144days at statistics for 30 years., and utside and half outside work was 159days and for interior work 142days at statistics for 10 years.. However, non working day due to high temperature is slightly increased, and non working day due to cold weather is slightly decreased in the case that the recent statistical data was used caused by global warming. Non working day due to rainfall was 23 days at statistics for 30 years, and it was 28 days at statistics for 10 years.

• Science of Emotion and Sensibility
• /
• v.1 no.1
• /
• pp.199-211
• /
• 1998

본 연구의 목적은 한국인을 대상으로 겨울철 체감실험을 통해 SET*(PMV)와 상관관계를 규명하고, ASHRAE Standard 55-74의 쾌적영역과 한국인의 쾌적영역을 비교 검토하는 것이다. 실험에 참가한 각 피험자는 동일한 유니폼을 착용한 체 의자에 앉아 환경시험실에서 2시간 체재하였다. 피험자의 평균피부온도는 신체 3군데에서 측정한 피부온도 값을 이용하였고, 전신온냉감 및 쾌불쾌감 신고는 매 15분 간격으로 측정하였다. 전신온냉감 신고 스케일은 -3= cold, -2=cool, -1=slight cool, o=neutral, +1= Slightly warm, +2=warm, +3=hot 이며, 쾌불쾌감 신고스케일은 0=comfortable, +1=slightly comfortable, +2=uncomfortable, +3=very uncomfortable이다. 겨울철 체감실험을 통해 아래의 결론을 얻었다. 1)전신온냉감이 중립이 될때 청년층의 SET*는 25.5$^{\circ}C$이며, 고령자의 중립온도는 27$^{\circ}C$이었다. 고령자는 청년에 비해 $1.5^{\circ}C$(SET*) 정도 고온을 선호하였다. 2)청년층의 쾌적영역은 24.2-26.8$^{\circ}C$(SET*)이며, 고령자의 쾌적영역은 25.7-28.2$^{\circ}C$이었다. 이러한 쾌적영역은 ASHRAE의 쾌적영역보다 고온지향적임을 알 수 있었다.

• Korean Journal of Materials Research
• /
• v.22 no.6
• /
• pp.303-308
• /
• 2012

This study evaluated the enhancement of microstructural and mechanical properties of a cross rolled Ni-10Cr alloy, comparing with conventionally rolled material. Cold rolling was carried out to 90% thickness reduction and the specimens were subsequently annealed at $700^{\circ}C$ for 30 min to obtain a fully recrystallized microstructure. Cross roll rolling was carried out at a tilted roll mill condition of $5^{\circ}$ from the transverse direction in the RD-TD plane. In order to observe the deformed microstructures of the cold rolled materials, transmission electron microscopy was employed. For annealed materials after rolling, in order to investigate the grain boundary characteristic distributions, an electron back-scattering diffraction technique was applied. Application of cold rolling to the Ni-10Cr alloy contributed to notable grain refinement, and consequently the average grain size was refined from 135 ${\mu}m$ in the initial material to 9.4 and 4.2 ${\mu}m$ in conventionally rolled and cross rolled materials, respectively, thus showing more significantly refined grains in the cross rolled material. This refined grain size led to enhanced mechanical properties such as yield and tensile strengths, with slightly higher values in the cross rolled material. Furthermore, the <111>//ND texture in the CRR material was better developed compared to that of the CR material, which contributed to enhanced mechanical properties and formability.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2004.04a
• /
• pp.192-210
• /
• 2004

Application methods of chemicals were investigated tn minimize strength reduction of corrugated boards under the high humidity environment encountered in the cold chain system. Starch insolubilizers were introduced in the starch solution preparation of the Stain hall method and their insolubilization effect of starch binder were estimated. The performance of water repellent agents(WRA) and moisture proof agents(MPA) were evaluated in terms of water and moisture resistance. And effects of the combination of the chemicals and the coating method were also examined. Addition of the polyamine polyamide insolubilizer to the main part in the Stain hall process improved the binding force and water resistance of starch, which contributed to minimize the strength reduction of paper under the high humidity environment. AZC and Glyoxal type insolubilizers could not be used in the experiment due to an excessively increased viscosity of starch solution and the poor stability. Conventional WRA treatment to the base paper enhanced water and moisture resistance very slightly even though water repellency of the paper reached R10 by the treatment. MPA showed excellent performance than WRA not only in water and moisture resistance but in water repellency. Double coating on paper with MPA was more effective than the single coating at the same coating weight. A newly developed MPA showed excellent performance and runnability only by a single coating instead of a double coating.