• Archives of Plastic Surgery
• /
• 제32권3호
• /
• pp.304-310
• /
• 2005

Bulging of the lower eyelid & tear trough groove is regarded as a sign of aging. In the past, the surgical excision of the fat pad has been the mainstray of the management of lower palpebral bag in cosmetic blepharoplasty, Recently, fat pad sliding method has been introduced to make more attractive lower eyelids. We used the fat pad for covering the hollowness of the lower eye lid. And we use redundant fat pad for filling & augmentation of the lower eye lid by reflexion. Redraping of the orbicularis arc, with its accompanying midfacial fat repositioning, anatomically restores the cheek and lower lid to make more youthful contour. By redraping and fixing the orbicularis arc on the medial surface of the orbital rim, it becomes a more attractive midface and may prevent of ectropion. From August, 2002 to July, 2004 in correction of lower palpebral bulge & tear trough groove, these two technique were performed in 42 consecutive individuals (84 lower eyelid) for two-year period. Follow up ranged from 3 to 15 months. (an average of 9 months) Palpebral bulge & tear trough groove were corrected and obtained a youthful midface. Complication was rare. The advantages of these techniques are that: prevent in of secondary palpebral bulge and irregularity of lower eyelid by using of reflexed fat fad; prevent in of ectropion. Thus an attractive midface is obtained by redraping of orbicularis arc.

• 대한기계학회논문집A
• /
• 제37권5호
• /
• pp.625-630
• /
• 2013

본 연구는 직경 45 nm인 원통형 나노동공을 가진 산화알루미늄(AAO) 박막에 오일을 함침시켰을때 동점도가 마찰 마멸에 미치는 영향을 규명하고자 실시하였다. 양극산화법으로 제조한 AAO 박막을 직경 1 mm의 440C 스테인리스 강구를 상대재로 하여 왕복동 미끄럼 접촉시험을 실시하였다. 마찰면과 마멸입자는 주사전자현미경과 에닥스(Energy-dispersive X-ray)를 이용해 분석하였다. 높은 동점도 오일의 윤활효과가 저점도 오일에 비해 크게 향상되었다. 동점도가 낮은 경우엔 모든 하중조건에서 심한 마찰흔적과 함께 두꺼운 소성변형층이 넓게 형성되었으며 경계윤활막의 손상으로 접촉면에 물질전이와 화학적 반응 현상이 모두 발생하였다. 오일의 점도가 높은 경우 마찰면에 존재하는 경계윤활막이 파괴되지 않아 마찰흔적과 소성변형층의 형성이 매우 적었으며 물질전이와 화학적 반응이 방지되었다.

• Structural Engineering and Mechanics
• /
• 제51권2호
• /
• pp.277-297
• /
• 2014

Since the isolation bearings undergo large displacements in base-isolated structures, impact with adjacent structures is inevitable. Therefore, in this investigation, the effect of impact on seismic response of isolated structures mounted on double concave friction pendulum (DCFP) bearings subjected to near field ground motions is considered. A non-linear viscoelastic model of collision is used to simulate structural pounding more accurately. 2-, 4- and 8-story base-isolated buildings adjacent to fixed-base structures are modeled and the coupled differential equations of motion related to these isolated systems are solved in the MATLAB environment using the SIMULINK toolbox. The variation of seismic responses such as base shear, displacement in the isolation system and superstructure (top floor) is computed to study the impact condition. Also, the effects of variation of system parameters: isolation period, superstructure period, size of seismic gap between two structures, radius of curvature of the sliding surface and friction coefficient of isolator are contemplated in this study. It is concluded that the normalized base shear, bearing and top floor displacement increase due to impact with adjacent structure. When the distance between two structures decreases, the base shear and displacement increase comparing to no impact condition. Besides, the increase in friction coefficient difference also causes the normalized base shear and displacement in isolation system and superstructure increase in comparison with bi-linear hysteretic behavior of base isolation system. Totally, the comparison of results indicates that the changes in values of friction coefficient have more significant effects on 2-story building than 4- and 8-story buildings.

• 한국기계가공학회지
• /
• 제18권12호
• /
• pp.15-21
• /
• 2019

The worm reducer is capable of quadrature power transmission when the shafts are disposed at right angles to each other. Since a large reduction ratio can be obtained of up to approximately 1/100 and a sliding movement is performed during operation compared with other gears, the noise and vibration are small, and there is the advantage that reverse rotation can be prevented. On the other hand, severe wear and damage are displayed on the gear and worm tooth surface, and many defects, such as intense heat generation of the reducer, occur. In the reducer case, the four-piece casing method was selected to solve the problems of heat generation, transmission efficiency, and assemblability. In this paper, we analyzed the problems of the worm and worm wheel (the core parts of a 5-Ton worm reducer) and casing through these methods and researched how to solve them.

• 한국산학기술학회논문지
• /
• 제15권3호
• /
• pp.1253-1258
• /
• 2014

CA 이온도금기술에 의한 TiC와 TiN 그리고 TiC/TiN 코팅재를 비교하기 위하여 트라이볼로지 물성을 연구하였다. 실험은 Falex journal V block 시스템을 이용한 터보시험기에서 수행하였다. 코팅재의 마찰과 마모특성은 작용된 하중과 미끄럼 속도에 의하여 다양하게 결정되었다. TiC와 TiN 그리고 TiC/TiN 코팅재는 표면에서 트라이볼로지 특성이 현저하게 증가하였다. 단층코팅에서는 TiC보다 TiN이 좋은 결과를 얻었다. 그러나, TiC/TiN의 다층코팅은 다른 어떤 단층코팅보다 좋은 성능을 보였다. 다층코팅의 성능이 향상된 핵심요소는 TiN층 외부와 강 사이에서 부착이 증가하게된 TiC의 역할 때문이다.

• 한국수자원학회논문집
• /
• 제45권6호
• /
• pp.583-596
• /
• 2012

호안은 제방을 보호하기 위하여 제방법면에 설치되는 구조물로써, 국내 외 설계기준에 의하여 호안을 설계할 때, 하상과 호안법면에서의 최대 소류력을 산정하여 제방 사면에 평균적인 개념으로 적용하고 있다. 제방 사면의 허용소류력을 산정하는 경우에는 비점착성 토사를 기준으로 사면의 흘러내림을 고려하지만, 본 연구에서는 0 < ${\Phi}$ < $90^{\circ}$ 의 경사를 갖는 점착성 제방 단면의 구간별 소류력 공식을 제안하였으며, 호안의 식생밀도와 공법 재료 변화에 따른 허용소류력을 산정하였다. 구간별 소류력을 산정하기 위하여 길이 20m, 폭 2m의 개수로를 설치하였고, 유량 조건을 변화하면서 수리모형실험을 수행하였다. 제방 사면의 구간별 허용소류력을 산정한 결과 호안 재료 변화에 따라서는 조도가 큰 공법의 허용소류력이 가장 크게 산정되었으며, 식생밀도에 의한 영향으로는 식생이 있는 경우 저항에 의하여 허용소류력이 증가되었지만, 밀도변화에 의하여는 큰 차이가 나타나지 않았다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2003년도 학술대회지
• /
• pp.313-323
• /
• 2003

The sliding wear behaviors of Zircaloy-4 nuclear fuel rod were investigated using two support springs with convex and concave shapes in room temperature air and water. The main focus is to compare the wear behavior of various test variables such as slip amplitude, environment, contact contours with different spring shape and a number of cycles. The results indicated that wear volume and maximum wear depth increased with slip amplitude in both air and water, but their trends tended to change according to the spring shapes and test environments. In air condition, the wear volume was controlled by wear debris behavior generated on worn surface. As a result, final wear volume and maximum wear depth decreased if a ratio of protruded wear volume to worn area $(D_p)$ would be saturated to specific value. This is because wear particle layer could accommodate large strain by accumulating and transforming wear particle layer. However, in water condition, metal-to metal contact was more dominant and wear volume was greatly affected by changed mechanical behavior between contact surfaces since wear debris should be generated after repeated plastic deformation and fracture. After wear test, worn surfaces were examined using optical microscope and SEM and details of wear mechanism were discussed using a ratio of wear volume to worn area $(D_e)$ at each test condition.

• 소성∙가공
• /
• 제17권1호
• /
• pp.59-67
• /
• 2008

This paper is concerned with the development of multi-action die or multiple sliding die for the forming process of serrated sheets. Serrated sheets is used as a toothed or serrated seal for securing together overlapping portions of steel or plastic strapping ligature and have been produced conventionally in several methods such as rolling and indentation. Recently, longitudinally oriented thermoplastic materials have been widely used in the strapping industry, while such materials are quite slippery. Provided projections on a seal biting into the strap should overcome the slipperiness and also the tooth configuration must be closely controlled to avoid too much transverse penetration of the strap which could result in the shredding of the strap when it is placed under tension. The seal includes a central portion with a plurality of teeth which bite into one strap portion and a pair of reversely bent legs with a plurality of teeth which bite into the other strap portion. Forming processes applicable for serrated sheets have reviewed in qualitative sense to find possibility in terms of applicability of one of existing processes to the serrated sheet forming process. Existing seal products have been analyzed with enlarged picture of strap contacting surface of the seal by microscope. Based on the analyses of the existing forming processes and seal products, a new forming process is proposed for serrated sheets. The proposed process requires a multislide die which enables inclined indentation or cut-in into the seal material as well as scratching processes sequentially in a single action press.

• 한국재난정보학회 논문집
• /
• 제7권2호
• /
• pp.87-95
• /
• 2011

노면의 미끄럼 저항성은 교통안전과 직결되는 도로 포장의 중요한 특성이다. 특히 우천 시 차량의 미끄러짐에 의한 교통사고를 줄이기 위해서는 도로의 성능 평가 시 반드시 고려해야 할 사항이다. 또한 자동차의 성능이 개선되고 운전자의 연령이 상대적으로 낮아짐으로써 고속주행을 하거나 급제동을 하는 운전 행태가 증가함에 따라 포장의 미끄럼저항성 역시 개선할 필요성이 더욱 증가하게 되었다. 그러므로 교통사고를 줄이기 위해서는 노면의 미끄럼저항성 시험을 통해 포장의 품질을 검증하고 또 향상시켜야 한다. 본 연구에서는 미끄럼 포장의 품질을 검증하기 위한 방법으로 휴대용 미끄럼저항 시험기 및 자동식 미끄럼저항 측정 장비의 측정원리를 분석하여 실제 포장변에 대하여 미끄럼 저항성을 평가하도록 하였다. 일반 밀입도 포장, 배수성 포장, SMA 포장에 실시한 미끄럼 저항성 평가는 배수성 포장과 SMA 포장의 노후화에 따라 일반 밀입도 포장의 미끄럼 저항성이 가장 크게 나타났다.

• International Journal of Fluid Machinery and Systems
• /
• 제2권2호
• /
• pp.110-120
• /
• 2009

Generally the fluid flows within the centrifugal impeller passage as a decelerating flow with an adverse pressure gradient along the stream wise path. This flow tends to be in a state of instability with flow separation zones on the suction surface and on the front shroud. Hence several experimental attempts were earlier made to assess the efficacy of using boundary layer fences to trip the flow in the regions of separation and to make the flow align itself into stream wise direction so that the losses could be minimized and overall efficiency of the diffusion process in the fan could be increased. With the development of CFD, an extensive numerical whole field analysis of the effect of boundary layer fences in discrete regions of suspected separation points is possible. But it is found from the literature that there have been no significant attempts to use this tool to explore numerically the utility of the fences on the flow field. This paper attempts to explore the effect of boundary layer fences corresponding to various geometrical configurations on the impeller as well as on the diffuser. It is shown from the analysis that the fences located on the impellers near the trailing edge on pressure side and suction side improves the static pressure recovery across the fan. Fences provided at the radial mid-span on the pressure side of the diffuser vane and near the leading edge and trailing edge of the suction side of diffuser vanes also improve the static pressure recovery across the fan.