• Geomechanics and Engineering
• /
• 제8권3호
• /
• pp.391-414
• /
• 2015

In this paper, stabilities of a plane slide rock slope under different hydraulic distributions were studied based on the nonlinear Barton-Bandis (B-B) failure criterion. The influence of various parameters on the stability of rock slopes was analyzed. Parametric analysis indicated that studying the factor of safety (FS) of planar slide rock slopes using the B-B failure criterion is both simple and effective and that the effects of the basic friction angle of the joint (${\varphi}_b$), the joint roughness coefficient (JRC), and the joint compressive strength (JCS) on the FS of a planar slide rock slope are significant. Qualitatively, the influence of the JCS on the FS of a slope is small, whereas the influences of the ${\varphi}_b$ and the JRC are significant. The FS of the rock slope decreases as the water in a tension crack becomes deeper. This trend is more significant when the flow outlet is blocked, a situation that is particularly prevalent in regions with permafrost or seasonal frozen soil. Finally, the work is extended to study the reliability of the slope against plane failure according to the uncertainty from physical and mechanics parameters.

• 대한치과교정학회지
• /
• 제23권4호
• /
• pp.607-618
• /
• 1993

If the centric prematurity occurs after orthodontic treatment, it creates centric slide regarded as a possible factor in the cause of temporomandibular disorder and/or postorthodontic relapse. The purpose of this study was to investigate the manner of centric prematurity and centric slide in postorthodantic patients. The 36 orthodontic patients who had been treated with edgewise appliance at least 3 mouths previously were used in this study. After recording centric relation by the leaf gauge technique, the centric prematurity and centric slide were studied using SAM2 articulator and mandibular position indicator. The results were as follows : 1. The highest percentage of centric prematurities were found on the second molars. 2. The buccal incline of the palatal cusp was the most frequent area of centric prematurities in the maxilla, while the lingual incline of the buccal cusp was the most frequent area in the mandible. 3. There were no trends in the direction of centric slide on the mandibular position indicator. 4. There were no significant differences in centric discrepancies between the premolar extraction and nonextraction group.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.814-819
• /
• 2003

Machine tool design concepts have evolved towards high efficiency, accurate precision. high structural integrity, and multi-functional systems. Like many other structures, machine tools are also composed of many parts. When these parts are assembled, many kinds of joints are used. In the finite element analysis of these assembled structures, most joints are commonly considered as rigid joints. But, to get the more accurate solution, we need to model these joints in a appropriate manner. In this study, rational dynamic modeling and analysis method for complex structures are studied with special attention to slide way joints. For modeling of slide way joints, a general modeling technique is used by influence coefficients method which is applied to the conversion of detailed finite element model to the equivalent reduced joint model. The theoretical part of this method is illustrated and the method is applied to the structure with slide way joint. In this method. the non-linearity of the contact surfaces is considered within a proper range and the boundary effect of the joint model can be eliminated. The proposed method was applied to finite element modal analysis of a clamp jointed cantilever beam and slide way joints of the vertical type lathe. The method can also be used to other kinds of joint modeling. The results of these analysis were compared with those of Yoshimura models and rigid joint models. which demonstrated the practical applicability of the proposed method.

• 한국전기전자재료학회논문지
• /
• 제18권1호
• /
• pp.75-80
• /
• 2005

In this thesis, We Fabricated Cu thin films of 1000 $\AA$, 3000 $\AA$, and 6000 $\AA$ thickness on the single crystal sapphire, polycrystal alumina, and amorphous slide glass substrates deposited by electron beam evaporation(EBE) method. We investigated properties of resistivity and adhesion of these Cu thin films under various conditions, substrate temperature(room temperature, 10$0^{\circ}C$, 20$0^{\circ}C$ under vacuum) and annealing temperatures(400 $^{\circ}C$, 600 $^{\circ}C$ for 30 min after the deposition). We found that these adhesion was increased in order of slide glass, sapphire, and alumina. The adhesion of the Cu thin films on alumina was high value about 4 times, compared with that of the Cu thin films on slide glass. We found that these resistivities were decreased with increasing substrate temperature and thin film thickness. The resistivity(2.05 $\mu$Ω\ulcornercm) of the Cu thin films with 6000 $\AA$ thickness at 200 $^{\circ}C$ on the slide glass was low value, compared with that of aluminum(2.66 $\mu$Ω\ulcornercm).

• 한국환경복원기술학회지
• /
• 제2권4호
• /
• pp.9-15
• /
• 1999

The purpose of this study was to investigate factors and variables which have significant effects on visual preference of urban stream in Taejon city and to suggest design & management information for urban stream. These works consist of two phases. First, we tested the Hyechon college students' visual preference for 36 spots of urban stream slide and then selected 10 spots slide by the Sturges' formula. Second, we analyzed factors and variables of visual preference of urban stream using the semantic differential scale method and then processed using descriptive analysis, factor analysis and multiple linear regression analysis. The major findings of this study can be summarized as follows. 1. The difference of landscape adjectives between the highest score of visual preference slide (No.10) and the lowest score of visual preference slide (No.2) was cleanness. 2. Three factors, the nature, the cleanness and the movement, were derived from the factor analysis. 3. Factors covering the visual preference of urban stream have been found to be the landscape of urban stream, the nature, the cleanness, and the movement. The visual preference factors of urban stream need to be considered in creating or restoring the ecological urban stream landscape.

• 한국진공학회지
• /
• 제9권4호
• /
• pp.367-372
• /
• 2000

$SiO_2$/Si 기판과 비정질 slide glass 기판 위에 대향타겟식스퍼터법(FTS법)을 이용하여 sputtering current 0.1~0.8 A, 방전 가스압 0.5~3mTorr, 기판온도 R.T~$400^{\circ}C$에서 ZnO 박막을 증착하였다. sputtering current 0.4 A, 가스압력 0.5 mTorr, 기판온도 30$0^{\circ}C$에서 증착된 ZnO/glass 박막과 ZnO/$SiO_2$/Si 박막의 $\Delta\theta_{50}$은 $3.8^{\circ}$와 $2.98^{\circ}$를 각각 나타내었다. 이러한 조건에서 FTS법은 비정질 slide glass 기판 위에서도 우수한 c-축 배향성을 갖는 ZnO 박막을 제작할 수 있다는 것을 알 수 있었다.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2006년도 학술대회
• /
• pp.289-295
• /
• 2006

The Musical Slide Show MAF, which currently being standardized by MPEG, conveys the concept of combining several established standard technologies in a single file format. It defines the format of packing up MP3 audio data, along with MPEG-7 Simple Metadata Profile and MPEG-21 Digital Item Declaration metadata; with JPEC images and optional text, and synchronizes them all together to create a slideshow of JPEC image data associated to MP3 audio data during the audio playback. The implementation of Musical Slide Show MAF can be a music karaoke file where users can sing along while listening to the music, view the JPEG slideshow and reading the lyrics; or a story-telling file where users can listen to the narrated story by looking at the related illustration slideshow of the story In this paper we present the tool to producing the Musical Slide Show MAF contents. Regardless the knowledge of user on the MAF file format, the authoring tool simplify the manner of packaging several multimedia contents into single file.

• 한국동물위생학회지
• /
• 제33권1호
• /
• pp.1-6
• /
• 2010

Monoclonal antibody (mAb)-based enzyme immune-slide assay (EISA) was used for the detection of Peste des petits ruminants (PPR) virus from field samples collected from a natural outbreak. The clinicopathological study was undertaken to diagnose the case primarily of PPR. Antigen was detected from discharges and faeces of infected goats and swabs of postmortem lesions prepared on glass slide or glass plate using acetone fixation. Nasal discharge collected at the early stage of disease course or lung is an appropriate ante- or postmortem sample for this technique, respectively. Convalescent polyclonal sera collected from recovered animals which were diagnosed as PPR by EISA showed high antibody titer against PPR by C-ELISA, demonstrating the satisfactory specificity of the test. Therefore, EISA is a sensitive and specific assay to confirm PPR infection both in field and laboratory conditions and especially suitable for developing country.

• 한국멀티미디어학회논문지
• /
• 제19권8호
• /
• pp.1225-1235
• /
• 2016

This paper presents a method for computer-assisted slide presentation using vision-based gesture recognition. The proposed method consists of a sequence of steps, first detecting a hand in the scene of projector beam, then estimating the smooth trajectory of a hand or a pointing finger using Kalman Filter, and finally interfacing to an application system. Additional slide navigation control includes moving back and forth the pages of the presentation. The proposed method is to help speakers for an effective presentation with natural improved interaction with the computer. In particular, the proposed method of using finger pointing is believed to be more effective than using a laser pointer since the hand, the pointing or finger are more visible and thus can better grab the attention of the audience.

• 한국정밀공학회지
• /
• 제11권5호
• /
• pp.180-188
• /
• 1994

Error assessment and evaluation for machine for machine tool slides have been considered as essential tools for improving accuracy. In this paper, a computer aided measurement technique is proposed using photo pin diodes of quadrant type and laser source. In thedeveloped system, three photo diodes are mounted on a sensor mounting table, and the sensored signal is processed by specially designed signal conditioner to give fine resolution with minimum noise. A micro computer inputs the processed signal, and the geometric errors of five degree of freedoms are successfully evaluated. Pitch, roll, yaw, vertical and horizontal straightness errors are thus assessed simultaneously for a machine tool slide. Calibration techniques such as optics calibration, photo diode calibration are proposed and implemented, giving precise calibration for the measurement system. The developed system has been applied to a practical machine tool slide, and has been found as one of efficient and precise technique for machine tool slide.