• 한국강구조학회 논문집
• /
• 제25권3호
• /
• pp.279-287
• /
• 2013

세장한 부재에 압축력이 작용할 때, 부재는 탄성좌굴이 발생하게 되어 급격히 내하력을 상실하고 파괴에 도달하게 된다. 이러한 현상으로 인한 부재의 파괴는 종국적으로 구조체에 위해를 가하게 되어 붕괴원인이 되기도 한다. 본 연구에서는 세장한 부재에 압축력이 작용할 경우 부재가 탄성좌굴이 발생하기 이전에 항복하도록 유도하는 장치(응력제한장치)를 개발하는 것을 목적으로 하고 있다. 특히, 본 논문에서는 응력제한장치로서 면외저항판 방식을 제안하고 실험과 유한요소 해석을 수행하였다. 실험의 변수는 면외저항판의 두께 및 저항판의 경사도이다. 실험 및 해석결과 면외저항판 실험체는 항복후 소성영역에서 내력의 큰 저하없이 안정적인 거동을 나타내고 있어 응력제한방식으로서 유효성이 확인되었다.

• Steel and Composite Structures
• /
• 제23권3호
• /
• pp.273-283
• /
• 2017

In this paper, it is aimed to present a detail investigation related to structural behavior of laterally unrestrained steel cantilever roof of tribune with slender cross section. The structure is located in Tutak town in $A{\breve{g}}r{{\i}}$ and collapsed on October 25, 2015 at eastern part of Turkey is considered as a case study. This mild sloped roof structure was built from a variable I beam, and supported on steel columns of 5.5 m height covering totally $240m^2$ closed area in plan. The roof of tribune collapsed completely without any indication during first snowfall after construction at midnight a winter day, fortunately before the opening hours. The meteorological records and observations of local persons are combined together to estimate the intensity of snow load in the region and it is compared with the code specified values. Also, the wide/thickness and height/thickness ratios for flange and web are evaluated according to the design codes. Three dimensional finite element model of the existing steel tribune roof is generated considering project drawings and site investigations using commercially available software ANSYS. The displacements, principal stresses and strains along to the cantilever length and column height are given as contour diagrams and graph format. In addition to site investigation, the numerical and analytical works conducted in this study indicate that the unequivocal reasons of the collapse are overloading action of snow load intensity, some mistakes made in the design of steel cantilever beams, insufficient strength and rigidity of the main structural elements, and construction workmanship errors.

• 한국항해학회지
• /
• 제23권2호
• /
• pp.29-42
• /
• 1999

An accurate method of estimating ship maneuverability needs to be developed to evaluate precisely and improve the maneuverability of ships according to the water depth. In order to estimate maneuverability by a mathematical model. The hydrodynamic forces acting on a ship hull and the flow field around the ship in maneuvering motion need to be estimated. The ship speed new the berth is very low and the fluid flow around a ship hull is unsteady. So, the transient fluid motion should be considered to estimate the drag force acting on the ship hull. In the low speed and short time lateral motion, the vorticity is created by the body and grow up in the acceleration stage and the velocity induced by the vorticity affect to the body in deceleration stage. For this kind of problem, CFD is considered as a goof tool to understand the phenomena. In this paper, the 2D CFD code is used for basic consideration of the phenomena to solve the flow in the cross section of the ship considering the ship is slender and the water depth is large enough. The flow fields Added and hydrodynamic forces for the some prescribed motions are computed and compared with the preliminary experiment results. The comparison of the force with measurement is shown a fairly good agreement in tendency. The 3D Potential Calculation based on the Hess & Smith Theory is employed to predict the surge, sway added mass and yaw added moment of inertia of hydrodynamic coefficients for M/V ESSO OSAKA according to the water depth. The results are also compared with experimental data. Finally, the sway added mass of hydrodynamic coefficients for T/S HANNARA is suggested in each water depth.

• Wind and Structures
• /
• 제6권5호
• /
• pp.387-402
• /
• 2003

In the past decades, much effort has been made towards the study of single-mode-based vibration controls with dynamic energy absorbers such as single or multiple Tuned Mass Dampers(TMDs). With the increase of bridge span length and the tendency of the bridge cross-section being more slender and streamlined, multi-mode coupled vibrations as well as their controls have become very important for large bridges susceptible to strong winds. As a simple but effective device, the TMD system especially the semi-active one has become a promising option for such coupled vibration controls. However, despite various studies of optimal controls of single-mode-based vibrations with TMDs, research on the corresponding controls of the multi-mode coupled vibrations is very rare so far. For the development of a semi-active control strategy to suppress the multi-mode coupled vibrations, a comprehensive parametric analysis on the optimal variables of this control is substantial. In the present study, a multi-mode control strategy named "three-row" TMD system is discussed and the general numerical equations are developed at first. Then a parametric study on the optimal control variables for the "three-row" TMD system is conducted for a prototype Humen Suspension Bridge, through which some useful information and a better understanding of the optimal control variables to suppress the coupled vibrations are obtained. This information lays a foundation for the design of semi-active control.

• 한국강구조학회 논문집
• /
• 제27권2호
• /
• pp.169-180
• /
• 2015

최근 구조물의 내진설계 기준이 2009년도 개정되면서 내진설계기준이 점차 구체화 되고 있다. 이에 따라 내진설계기준이 반영되지 않았거나 현재의 기준을 만족시키지 못하는 국내 구조물에 대해 재 검토 될 필요가 있다. 특히 중 저층 구조물의 경우 횡력 저항 요소는 대부분 가새에 의해 설계되어 있다. 즉 현재 사용 중인 가새가 반복적인 지진하중에도 전체 구조물의 안정성을 확보할 수 있도록 합리적인 보강방안이 구체화 될 필요가 있다. 본 연구에서는 무용접 냉간성형 강재로 조립된 압축가새의 구조적 성능과 거동을 분석하고자 한다. 실험변수는 보강길이 그리고 보강단면 비를 중점으로 구조실험을 수행하였다. 따라서 본 연구에서는 세장한 H형강 가새의 휨좌 굴을 억제하여 압축내력을 발휘토록 보강방안을 제안하였고, 보강안의 압축거동을 검증하기 위해 세장비와 보강량을 변수로 구조 성능 실험을 수행하여 강도, 강성, 변형성능과 파괴거동의 분석을 수행하였다.

• Structural Engineering and Mechanics
• /
• 제59권3호
• /
• pp.503-526
• /
• 2016

In-plane and out-of-plane free vibration analysis of Timoshenko curved beams is addressed based on the isogeometric method, and an effective scheme to avoid numerical locking in both of the two patterns is proposed in this paper. The isogeometric computational model takes into account the effects of shear deformation, rotary inertia and axis extensibility of curved beams, and is applicable for uniform circular beams, and more complicated variable curvature and cross-section beams as illustrated by numerical examples. Meanwhile, it is shown that, the $C^{p-1}$-continuous NURBS elements remarkably have higher accuracy than the finite elements with the same number of degrees of freedom. Nevertheless, for in-plane or out-of-plane vibration analysis of Timoshenko curved beams, the NURBS-based isogeometric method also exhibits locking effect to some extent. To eliminate numerical locking, the selective reduced one-point integration and $\bar{B}$ projection element based on stiffness ratio is devised to achieve locking free analysis for in-plane and out-of-plane models, respectively. The suggested integral schemes for moderately slender models obtain accurate results in both dominated and non-dominated regions of locking effect. Moreover, this strategy is effective for beam structures with different slenderness. Finally, the influence factors of structural parameters of curved beams on their natural frequency are scrutinized.

• Steel and Composite Structures
• /
• 제34권1호
• /
• pp.107-122
• /
• 2020

Moment resisting stub columns (MRSCs) have increasingly adopted in special moment-resisting frame (SMF) systems in steel building structures, especially in Asian countries. The MRSCs typically provide a lower deformation capacity compared to shear-panel stub columns, a limited post-yield stiffness, and severe strength degradation as adopting slender webs. A new MRSC design with cored configuration, consisting of a core-segment and two side-segments using different steel grades, has been proposed in the study to improve the demerits mentioned above. Several full-scale components of the cored MRSC were experimentally investigated focusing on the hysteretic performance of plastic hinges at the ends. The effects of the depths of the core-segment and the adopted reduced column section details on the hysteretic behavior of the components were examined. The measured hysteretic responses verified that the cored MRSC enabled to provide early yielding, great ductility and energy dissipation, enhanced post-yield stiffness and limited strength degradation due to local buckling of flanges. A parametric study upon the dimensions of the cored MRSC was then conducted using numerical discrete model validated by the measured responses. Finally, a set of model equations were established based on the results of the parametric analysis to accurately estimate strength backbone curves of the cored MRSCs under increasing-amplitude cyclic loadings.

• 대한건축학회논문집:구조계
• /
• 제33권12호
• /
• pp.37-44
• /
• 2017

Due to structural characteristics, construction costs and duration of a modular system would be saved by minimizing the schedule on the job site. As such, it is crucial to develop a connection that can guarantee stiffness while allowing for simple assembling. Particularly, the mid- to high-rise construction of the modular system necessitates the securing of the structural stability and seismic performance of multi-unit frames and connections, and thus, the stiffness of unit-assembled structures needs to be re-evaluated and designed. However, evaluating a frame consisting of slender members and reinforcing materials is a complicated process. Therefore, the present study aims to examine the structural characteristics of a modular unit connection based a method for reinforcing connection brackets and hinges while minimizing the loss of the cross section. Toward this end, the study modeled the beam-to-column connection of a modular system with the proposed connection, and produced a specimen which was used to perform a cycling loading test. The study compared the initial stiffness, the attributes of the hysteretic behavior, and the maximum flexural moment, and observed whether the model acquired the seismic performance, compared to the flexural strength of the steel moment frame connection that is required by the Korean Building Code. The test results showed that the proposed connection produced a similar initial stiffness value to that of the theoretical equation, and its maximum strength exceeded the theoretical strength. Furthermore, the model with a larger ceiling bracket showed higher seismic performance, which was further increased by the reinforcement of the plate.

• 한국강구조학회 논문집
• /
• 제24권1호
• /
• pp.23-34
• /
• 2012

본 연구에서는 인장강도 800MPa급 고강도강재(HSA800)의 단주 중심압축실험과 편심압축실험을 통해 균등압축과 휨-압축 부재의 강도를 평가하여 현행 강구조기준(KBC2009, AISC2005)의 적용성 여부를 검토하였다. 또한 잔류응력의 계측을 통하여 강재 항복강도와 잔류응력과의 상관성 여부도 검토하였다. 고강도강재와 일반강재의 국부좌굴 거동 차이의 여부를 확인하기 위하여 중심압축실험에 SM490 강재로 제작된 비교실험체도 포함시켰다. 강도로 무차원화한 판폭두께비와 판 단부의 지지조건을 주요변수로 하여 실험을 실시하였다. 편심압축실험은 HSA800 강재만을 대상으로 하였으며, 휨-압축의 조합력을 받는 부재의 P-M 상관관계를 알아보기 위해 가력 편심거리를 조정하여 다양한 P-M 조합에 대해 강도평가 실험을 수행하였다. 잔류응력은 중심압축실험에 사용된 H형단면 실험체를 대상으로 비파괴실험법인 압입법에 의해 가력 이전에 그 크기와 분포를 측정하였다. 실험결과 중심압축을 받는 모든 HSA800 단주는 판 단부의 지지조건 및 판폭두께비 조건에 따른 현행 강구조기준의 설계강도를 충분히 발휘하였다. 편심압축을 받는 실험체 역시 현행 설계기준의 P-M 상관관계를 충분히 안전측으로 충족하였다. 본 연구에서도 잔류응력의 크기는 강재의 항복강도와 무관하다는 선행연구결과와 합치하는 잔류응력 측정값이 얻어졌다.

• Parasites, Hosts and Diseases
• /
• 제22권1호
• /
• pp.85-95
• /
• 1984

한국 시장에서 얻은 명태의 장내 기생 조충류 조사의 일환으로 이 연구를 실시하였다. 명태의 장에서 얻은 각종 충체에 대하여 형태학적 계측과 박절표본을 작성한 소견을 가지고 Schmidt와 Yamaguti의 검색표에 의거하여 속과 종을 동정한 바 다음과 같은 결과를 얻었다. 1. 본 실험에서 국내에 미기록된 신종으로 Eucestoda 아강 Caryophyllidae목 Caryophyllaeidae과 Lytocesinae아과 Khawa속과 Eucestoda아강 Trypanorhyncha목 Acystidea아목 Paranybeliniidae과 Pseudonybelinia속과, Eucestoda아강 Trypanorhyncha목 Aeystidea아목 Tentaculariidae과 Nybelinia속과 Tentacularia속 그리고 Eucestoda아강 Trypanorhyncha목 Cystidae아목 Lacistorhynchidae과 Eulacistorhynchus속과 이들의 종을 확정하였다. 2. Khawia sinesis의 특징은 두절에 소포가 없으며 넓고 펑평하나 가장자리가 들쑥날쑥한 점과 목이 짧고 체부와 두부사이가 명화하지 않은 점이었다. 3. Eulncistorhynchus chiloscyllius의 특징은 두절이 꽤 긴 편이며 가장자리가 들쑥날쑥하지 않다. 구문낭도 길다. 수축근은 남의 기저부에 부착되어 있다. 흡구는 둘로 난형 혹은 원형이며 후단에, 절흔이 없다. 촉모는 길 갈고리들이 변형되어 있으며 이중의 chainette가 있다. 체절은 acraspedote하고 성숙체질은 체폭보다 길이가 더 길다. 4. Tentacularia coryphaenea의 특징은 두절이 들쑥 날쑥하지 않고 원주형이다. 흡구는 분리되었고 후단 유리 연에는 작은 가시가 있다. 두절에서 나온 4개의 수축성 촉모에는 갈고리들이 나선형으로 배열되어 있다. 촉모를 둘러싼 초는 꼬여있지 않다. 근낭은 긴 타원형이다. 5. Pseudonybelinia odontacantha의 특징은 두절이 들쑥날쑥하지 않고 촉모는 계구의 전쳔부에 가까이 부착되어 있다. 갈고리는 좌측으로 부터 나선상으로 배열되어 있다. 근낭은 폭보다 길이가 3배정도 긴다. 6. Nykelinia lingu구곤의 특징은 두절이 짧고 들쑥 날쑥하지 않다 흡구는 4개로 분리되어 있으며 각기 자유판을 갖고 있다. 촉모는 원통상으로 단단한 갈고리로 무장되어 있다.