• 문화기술의 융합
• /
• 제5권3호
• /
• pp.345-349
• /
• 2019

우리나라는 산지가 70% 이상으로 도로, 철도, 산업단지 조성 등의 기반시설 구축시 원지반 일부를 깍아 부지를 형성하는 이른바 깍기 비탈면이 널리 쓰이고 있다. 최근에는 환경 훼손에 대한 규제가 더욱 엄격해져 대규모 깍기 비탈면을 지양하고 최소한의 용지사용으로 목적구조물을 건설하기 위하여 다양한 방법의 공법들이 개발되어 적용되고 있으며, 그 중 활발하게 적용되는 공법이 패널식 옹벽 공법이다. 패널식 옹벽은 지보재 보강을 통한 원지반의 전단강도 증가와 그 지보재 전면에 프리캐스트 옹벽을 체결하여 벽체를 형성시킴으로써 수평토압에 저항하는 공법이다. 지보재는 쏘일네일링, 어스볼트, 그라운드앵커 등이 사용되고 있으며, 그 중 그라운드앵커는 강선에 미리 인장하중을 도입하는 보다 적극적인 보강형태로 전면판인 패널에 큰 집중하중이 작용하게 된다. 이러한 집중하중은 콘크리트 패널에 균열을 발생시키고 옹벽 자체의 내구성을 저해시키는 요인으로 본 연구에서는 이러한 기존 패널식 옹벽의 단점을 보완하기 위하여 패널 정착부에 강관 슬리브 및 보강재를 매입함으로써 균열을 방지하고, 패널 단부에 요철 모양의 전단키를 적용하여 기존 그라우트앵커가 가지는 개별거동에 대한 취약점을 보완하여 안정성을 향상시켰으며, 옹벽 전면 콘크리트 노출 및 정착부 돌출에 의한 경관성 저하문제를 자연석 문양 연출과 정착부를 돌출시키지 않는 단면구성으로 해결하였다. 패널에 사용된 균열방지 슬리브 및 보강재의 효과를 검증하기 위하여 실내시험 및 3차원 수치해석을 수행한 결과, 강관슬리브 및 보강재의 사용으로 패널의 전반적인 강도 증가와 균열억제 효과가 입증되었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.337-338
• /
• 2012

As a rahmen structure, the connection among columns of Green frame is divided into three types such as sleeve, coupler (column pre and post installation), and bolt. The bolt type consists of six types according to steel frame shape and each type has different constructability, safety, structural performance, cost, and quality. Therefore, the analysis of comparison among the types is necessary. The objective of this study is to analyze the characteristics according to the shape of six bolt types to select the appropriate connection of Green frame. The results of this study can be used as a basic study for indentifying the characteristics of steel frame on site applying bolt type connection of Green frame. In addition, this study can be applicable to compare and analyze the performance and constructability of six bolt types in detail.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.13-14
• /
• 2013

Mechanical splices has been applied in nuclear power plant according to ASME(American Society of Mechanical Engineering) and ACI(American Concrete Institute) Code requirements. In particular sleeve with ferrous filler metal splices and cold roll formed parallel threaded splices have been used in domestic nuclear power plants. The objective of this study is to find out the constructability of the mechanical splices which had been used in Korea nuclear job site and to review the technical trends in the near future.

• 복식
• /
• 제24권
• /
• pp.29-46
• /
• 1995

This study is on the classification of Chchori forms in Korea in the 16 th and 17 th Centuries by investigating the patterns an construction of excavated clothong. The characteristic features of the Korean Chchori in the period are as follow. 1. The Chchori shows forms. The diversity is accomplished by varing the components pattern is Chchori, such as collar, sleeve, and bodice. The divertification in Chchori pattern represents an attempt to advance the simple Chchori pattern in the 4 th and 5 th Centuries to the mordern one. 2. Mokpankit (목판깃) has a straight construction line but Kalkit (칼깃), Dangkogit(당코깃) have curved one. This suggests a transformation in the construction line of Chchori. 3. Among Chchori pattern, some Mokpankit and Kalkit Chchori show two kinds in size ; 40-50 cm and 60-70 . However, Dangkokit Chchori has only one size of 40-50cm. Considering the difference in body size between man and woman , Mokpankit Chchori and Kalkit Chchori are jueged to be for man and woman commonly, and Dangkokit Chchori is for woman only. After the period , woman wears only Dangkokit Chchori, whichis thought to come from the sex discrimination. Consequently on the viewpoint of rinsiple of Adaptation to Environments, forementioned facts prove the changes in Korean society in the 16 th and 17 th centuries on the historical basis of costume.

• 한국의류학회지
• /
• 제30권7호
• /
• pp.1090-1102
• /
• 2006

The purpose of this study is to develop an improved work clothing which is much safe, comfortable, mobility and convenient than what workers currently wear at construction site. The investigation has been conducted to evaluate current work clothing to grasp any problems, discomforts and damages related to the work clothing. For the best and accurate data, hands-on investigation and a short-interview have been performed at the construction site as well as formulating a questionnaire. The questionnaires was answered by 425 workers and safety manager of 13 different construction site. The result of the questionnaire enables us to design a sample work clothing, many pa π s such as material, pattern and design have been improved. To improve the amenity of heat, the surface of a material was used by $Aerocool^{\circledR}$ fiber which contains inside dryness function. In order to absorb perspiration on the back the armpits, mesh martial that is mixture of $Coolever^{TM}$ fiber and $Mirawave^{TM}$ fiber was used to absorb perspiration in an effective manner. And a sleeve's bottom part and trousers' bottom part's cover method have been changed. Sample work clothing was shorten at the side of upper garment up to 2cm and lengthen the length of the back by 3cm. To reduce the tightness around armpit more room was given in that area. Darts were added to the elbow, the hip, and the knees that also followed an ergonomic pattern. A sample work clothing evaluated an objective assessment and subjective assessment to compare to a current work clothing. Assessment group consists of seven subject groups and nine expert groups to evaluate external appearance and adaptability to the movements. In all aspects of the test, the result of evaluation process of the sample work clothing received more positive assessment than the current work clothing.

• 패션비즈니스
• /
• 제7권2호
• /
• pp.15-25
• /
• 2003

In this study on the Persiandress called Persiandress or Mediandress, its names, styles, and structures that are still subject to a great deal of controversy were investigated. In addition, the reason why the Persiandress was wrongly named as Kandys by the early researchers was also examined. The documents of reliefs on the Apadanastairs in Persepolis and the European papers concerning this themes were subject of this analysis. Such investigation and examination results are summarized as follows. There is still no agreed name describing the Persiandress, which is called "Persiandress" or "Mediandress". Further, there is no definite conclusion on whether the Persiandress was made in one piece or two pieces. The first person who insisted that the Persiandress was made in one piece is a German archaeologist, Ernst Herzfeld. He said that the Persiandress was made in one long tetragonal piece, had a hole in the middle for head, and had lots of pleats when it was tied with a belt. On the contrary, researchers who insisted that the Persiandress was made in two pieces stressed the sleeve pleats in four folds, which is one of the representative characteristics, and said that such four-fold sleeve pleats would not be formed when the Persiandress was made in one piece and worn by a belt. Consequently, they have conducted studies according to their insistence and the resultant pattern. Kandys, the Median's typical dress, is a coat worn over the jacket and trousers. Although it had sleeves, the Median did not use them. Indeed, Kandys was used as a kind of cloak. However, the wrong term, Kandys is still used in Korea. So, it is necessary to correct use of such wrong term.

• 한국의류산업학회지
• /
• 제20권2호
• /
• pp.128-142
• /
• 2018

This study explores newborn clothing with regard to clothing type, construction, textiles, design, size, and label placement. Related consumer complaints are also analyzed. Analysis of 50 newborn clothing items revealed six types of newborn clothing: baenaet jeogori, baenaet gown, bodysuit, one-piece, shirt and pants set, and pants. The baenaet jeogori was the most common type, and the most commonly used fasteners were ties and snaps. The following characteristics were commonly observed: front opening, long raglan sleeves, mitten cuffs, cotton fabric, white/ivory color, animal print, contrast hem, $appliqu{\acute{e}}$, and size 60. In-depth interviews of 12 mothers with children under 24 months revealed that the baenaet jeogori was the most unsatisfactory type; the shirt and pants set and bodysuit were preferred. Interviewees were dissatisfied with types of openings, expressing a preference for snaps and complaining about ties, too many snaps, metal snaps, and shoulder openings. Overly wide or narrow sleeves resulted in improper fit, and long sleeves made it difficult to dress the baby. Interviewees required diverse sleeve length options. They were dissatisfied with heavy fabric for hot and warm seasons, and with labels attached inside clothing or outside near the neckline. Mothers with particularly small or big babies complained about limited sizes. To improve current newborn clothing, additional items such as shirt and pants sets or individual pants, front opening clothing with few snaps, proper sleeve fit with diverse length options, lightweight fabric for hot and warm seasons, label placement that avoids skin irritation, and size segmentation are recommended.

• 한국생활과학회지
• /
• 제5권1호
• /
• pp.55-64
• /
• 1996

The aim of this study is to get the basic data to design the clothing for the female teachers. In this study, we survey the practice of the wear in the spring and the fall of the 422 female teachers in primary, middle and high school, and their wearing sensation according to clothing construction factors. The results are as follows: first, the female teachers frequently wear blouse and skirt, jacket and blouse, jacket and T-shirts, cardigan and T-shirts in upper wear. Second, most female teachers had troubles in their clothing at work. They had serious troubles in writing on the blackboard, due to the improper form and. length of the sleeves, and the inconvenience of their skirt is due to the improper length, while they go up the strains. Third, the comfortable factors of the female teachers' blouse are as follows; round neck line, soutien and peter pan collar, sleeve attatched bodice with a little loose armhole, $10{\sim}20cm$ under from waist in length, front slit, and fastening bottons. In case of skirt, they perceive A-lined, flared, pleats skirt more convieniently than tight one, which are 10cm under from kneeline in length, side fastening system, back slit.

• 한국지반공학회논문집
• /
• 제26권8호
• /
• pp.15-25
• /
• 2010

점토층 사이에 존재하는 모래 협재층은 연약지반 거동에 중요한 영향을 미친다. 협재층은 주로 표준 콘(단면적: $10cm^2$)에서 측정된 지반의 저항력과 간극수압 값을 이용하여 평가하고 있지만, 높은 해상도를 위하여 소형 콘이 널리 활용되고 있다. 본 논문의 목적은 연약지반에 얇게 분포된 협재층을 선단저항력, 주면마찰력 그리고 전기비저항을 이용하여 평가할 수 있는 전기비저항 콘(Cone Resistivity Penetrometer, CRP)을 개발하고 적용하는 것이다. CRP는 각각 실내실험(단면적: $0.78cm^2$, 직경: 1.0cm)과 현장실험(단면적: $1.76cm^2$, 직경: 1.5cm)에 활용되도록 제작하였으며, 길이는 표준 콘(단면적: $10cm^2$, 직경: 3.57cm)의 단면적과 마찰부의 면적비를 고려하여 제작하였다. 실내실험은 모래와 점토가 반복적으로 조성된 다층의 층상탐지 셀을 사용하여 각 지층의 경계면을 탐사하였으며, 현장실험은 광양지역에서 심도 6m부터 15m까지 관입실험을 수행하였다. CRP는 실내실험에서 측정된 선단저항력과 전기비저항으로 조성된 시료의 각 지층 경계면을 뚜렷하게 평가하였으며, 현장실험에서는 3개의 협재층을 탐지하였다. 본 연구에서 개발된 CRP는 실내 및 현장결과 적용성이 뛰어나 추후 유용하게 사용될 것으로 판단된다.

• 대한기계학회논문집
• /
• 제10권3호
• /
• pp.408-418
• /
• 1986

본 연구에서는 표면은 단단하고 내면은 강인한 조직을 얻기위하여 대형 성형 탄 로울에 대하여 노에서의 급속가열 및 대기 상태에서의 자연냉각의 열처리가 수행 되어진다. 급속가열 및 냉각시 성형탄 로울 내부의 온도 분포 예측을 위하여 대류 및 복사 열전달 경계조건을 가지는 1차원 비정상 열전도 방정식이 유한 차분법을 사 용하여 해석되어졌다. 여기서 급속가열시 연소가스로 부터 기체복사에 의하여 성 형탄 로울의 바깥표면을 통하여 흡수되는 열량은