• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.12
• /
• pp.2008-2013
• /
• 2016

This paper proposes analysis and suppression method for reactive power vibration of the slave motor caused by back-EMF mismatch between the master and the slave motor and stator resistance during middle-low speed operation. The master and slave motors are parallel connected dual SPMSMs(Surface mounted Permanent Magnet Synchronous Motors) fed by a single inverter. To suppress vibration of reactive power, RPC(Reactive Power Compensator) proposed in this paper analyzes flux-axis current vibration of the slave motor that occurs in middle-low speed operation using a mathematical model of the fan motor. And RPC adds vibration components detected from flux-axis current of the slave motor to flux-axis current of the master motor. The results of experiment conducted verify the efficacy of the proposed method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.12
• /
• pp.1521-1527
• /
• 2013

This study proposes a wearable master device that can measure the joint stiffness and the angular displacement of a human operator to enhance the adapting capability of a slave system. A lightweight inertial sensor and the exoskeleton mechanism of the master device can make an operator feel comfortable, and artificial pneumatic muscles having a working principle similar to that of human muscles improve the performance of the slave device on emulating what a human operator does. Experimental results revealed that the proposed master/slave system based on the muscle stiffness sensor yielded uniform tracking performance compared with a conventional position-feedback controller when the payload applied to the slave system changed.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04a
• /
• pp.919-921
• /
• 2004

최근 임베디드 시스템 설계에서 저전력 소모와 SoC가 주된 관심사가 되면서, ARM 프로세서와 AMBA 버스가 각광을 받고 있다. AMBA 버스가 고속 모듈에 대해서는 장점을 지니지만. 저속 모듈과의 인터페이스에는 많은 제약이 따른다. 따라서 속도가 서로 다른 이종 모듈간에 속도 보상을 위한 bridge 가 필요하다. 이러한 용도로 APB bridge가 표준으로 자리 매김하고 있지만, 속도가 고정되어 있기 때문에 융통성이 배제된다. 본 논문에서는 이러한 단정을 보완하기 위해, 구조가 간단하고 구현이 쉬운 ISA 방식의 bridge를 제안하여, 많은 주변장치들을 손쉽게 AHB Slave로 인터페이스 할 수 있게 만든다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.48-48
• /
• 2000

We developed a wireless communication system for multiple instrumentation system. The developed system has a function of remote instrumentation and PLC(Programmable Logic Controller) control. The system consists of CC(Control and Communication) protocol, wireless media access and physical media system. For multiple wireless communication, we propose a hub polling protocol based on master-slave control concept. To show the validity of the developed system, several experiments are illustrated.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1692-1695
• /
• 1997

In this paper, a new control scheme for master-slave control of telerobot is proposed. The porposed method can be classified into unilater master-slave control methods in the aspect of the data flow. But the master arm in the proposed control scheme can deliver operator the similar kinesthetic sense as other bilateral force reflecting master arms do. The principle concept is that the sensed operator's force/torque is used as the reference input for a damping controller type of telerobot controller which track the operators efforts. Master arm and master controller can be implemented in a simple form, and it needs not be driven by actuators, but force sensing capability.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.479-480
• /
• 2016

This paper introduces a master and slave control algorithm for parallel operation of UPS system. If each module of UPS system control the output voltage and filter inductor current in parallel operation, it occur unbalanced output power each module. To operate UPS system parallel, it need a algorithm that control output power of modules. A master and slave control algorithm is helpful to balance output power of modules by controlling output current. The effect of a master and slave control algorithm is proved by simulations.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.04a
• /
• pp.390-394
• /
• 1994

In many cases, tasks are unpredictable and therefore not doable by special-purpose or pro-programble robots. So master/slave type robot hands which combine human perceptions with conventional robot hands are required as robot end effector. These also can be applied to hazardous worksites such as outer space, deep sea and nuclear power plant. In this study, master/slave type robot fingers with 3 joints each are designed and constructed. To control force accurately, TDT(tension difference type) torque sensors are constructed and attached toeachjoints of slave finger and new force reflecting control algorithm is suggested. Finally, experimental results show that the new control algorithm can be successfully applied.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.290-294
• /
• 1995

In master-slave teleoperation system, time delay may be a critical problem because a task is performed over a distance. Even if the system is stable without time delay, time delay can make the system unstable. In this paper a new control scheme applicable to the system with time delay would be proposed,which is based on the conventional position-position feedback type controller. The stability of this control system is proved using scattering theory, and is compared with the conventional ones. By performing the simulation of a one-d.o.f master-slave system, the validity of the proposed algorithm is verified.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.10
• /
• pp.1043-1052
• /
• 2009

In this work, a master-slave manipulator system which will be used for handling objects contaminated by radioactivity has been addressed. The links of manipulators are driven independently by individual motors installed on the base and the driving torque is transmitted through pre-tensioned tendons. Since the measurable variables are the positions and rates of master/slave motors, only a constrained specific bilateral control structure is available. In the consideration of the flexibility of the tendon and constrained control structure, we derived a necessity for tendon design to prevent uncontrollable vibration mode through a modal analysis. Based on a reduced rigid body model, a control design was suggested and tendons were selected. The feasibility of the proposed analysis and tendon design were verified along with some simulation results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.132-135
• /
• 2000

The development of a robot system being able to work instead of human in the hazardous environment have been conducted for many year. In this study, the new design of controllers for the Master-Slave system is discussed. The Master-Slave system, force, velocity and torque signals are communicated between a master and a slave system. the conventional requires the enhancement of characteristics of tactility for minute force, precision signals and mechanical abrasion of loader. It is possible b controlling the viscosity of ERF(Electro-rheological fluid) since it varies with the electric field. Design of controller as well comparison between numerical simulation and experiments as will be presented. Futhermore, current methodology is also applicable to design of tele-surgery