• 대한조선학회논문집
• /
• 제44권3호
• /
• pp.279-284
• /
• 2007

As a container vessel becomes larger, the bow flare becomes larger. The large bow flare structures are often subjected to dynamic pressure loads due to bow flare slamming occurring in rough seas. The aim of this paper is to investigate the characteristics of bow flare slamming pressure measured in a real voyage through the North Pacific Ocean. The characteristics of impact pressure load caused by slamming is addressed in terms of the pressure pulse-time history which involves rising time, peak pressure, decaying time and type of pressure decay. The values were presented using non-dimensional parameters.

• 대한조선학회논문집
• /
• 제47권3호
• /
• pp.410-420
• /
• 2010

When ships are sailing with large motions in rough waves, the slamming phenomenon occurs and the ships suffer from impulsive pressure loadings. Recently, ships are becoming lager and faster than before and it becomes more possible that the ships experience larger impacts on their bows and sterns. Many researchers have been performing the investigations on slamming experimentally and theoretically for a long time. Most of the research reported in the open literature focused on how to accurately estimate the amplitude of the peak pressure of slamming. According to the results of a recently published work, not only the amplitude of peak pressure but also the width of the peak may play an important role in predicting the extents of damage of impacted structures. The uncertainty of impulsive pressure loadings due to slamming has been indicated by many researchers. However, probabilistic treatments of the impulsive pressure loadings are few. In this study, drop tests were conducted on wedges having dead-rise angles of $0^{\circ}$ and $10^{\circ}$. Not only the amplitude of peak pressure but also the width of peak pressure were measured. Furthermore, the variations of those values are also provided for the probabilistic approach of the slamming problem.

• 대한조선학회논문집
• /
• 제49권2호
• /
• pp.109-115
• /
• 2012

Slamming phenomenon may occur when a ship navigates a high sea region, where the response of ship can be expected as elastic behaviour and the resultant wave loads may increase. In this paper, numerical analysis of ship motions and wave loads including momentum slamming was performed using the strip theory with regular waves. In order to analyze the effect of slamming force on the global ship motions, time histories of each mode of displacement and forces were simulated by using Newmark-beta time integration scheme. The added mass and damping coefficients calculated by Lewis form method were compared with the results of given references. For verification of numerical results, the motion RAOs of a S175 containership were calculated as an example of application and time histories of respective displacement and vertical bending moment were compared with the results of ITTC workshop benchmark test.

• Journal of Advanced Research in Ocean Engineering
• /
• 제1권2호
• /
• pp.115-133
• /
• 2015

This paper describes an approach for the numerical analysis of container ship slamming and whipping and various parameters that influence slamming and whipping. For validation purposes, the numerical analysis results were compared with experimental results obtained as part of the Wave-Induced Loads on Ships Joint Industry Project. Water entry problems for two-dimensional (2D) sections were first solved using a 2D generalized Wagner model (GWM) for various drop conditions and geometries. As the next step, the hydroelastic numerical analysis of a 10,000-TEU container ship subjected to slamming and whipping loads in waves was performed. The analysis method used is based on a fully coupled model consisting of a three-dimensional (3D) Rankine panel model, a 3D finite element model (FEM), and a 2D GWM, which are strongly coupled in the time domain. Parametric studies were carried out in both numerical and experimental tests with various forward speeds, wave heights, and wave periods. The trends observed and the validity of the numerical analysis results are discussed.

• 한국전산유체공학회지
• /
• 제21권3호
• /
• pp.55-63
• /
• 2016

Nowadays, large container ships are continually developed and that's why the bow and stern structural stability problems by slamming become a significant more and more. However, due to the complexity of slamming, it is difficult to consider those problems at the design stage. For this reason, we attempt numerical analysis through SNUFOAM by generating the bow and stern two-dimensional cross-sectional grid in WILS JIP experiment at KRISO. Unlike the conventional method for the computation time saving, by setting the inlet flow conditions referred to the model test, we analyzed the slamming without applying the grid deformation method. As a result, when the stern model, as in the previous studies, it was possible to obtain quantitatively the fluid impulse is close to the experimental results. When the bow model, we can found the change by the position of force sensors which are derived for the bulbous bow and obtained fluid impulse and flow shape at slamming similar to the model test.

• 수산해양기술연구
• /
• 제19권2호
• /
• pp.117-124
• /
• 1983

정면규칙파중에서 Bow-flare부 충격은 선저충격에 비해서 작용 시간이 길고, 선체 수직운동진폭이 큰 상태이거나, 파고가 큰 입사파가 적용되는 경우에 선체에 작용하는 충격력은 상당히 크며, 파고가 높아지면, 발생하는 모우멘트도 증가한다. 2. Bow-flare부가 큰 선형의 경우에는 선저노출이 일어나지 않더라도 부가질량의 급격한 증가에 따라 상당히 큰 충격력이 작용한다. 3. Deckwetness, 불규칙파중에서의 응답해석, 상대변위를 구할 때 Dynamic Swell-up의 양을 고려한 계산 등의 검토가 요망된다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권3호
• /
• pp.294-306
• /
• 2018

Most offshore structures including offshore wind turbines, ships, etc. suffer from the impulsive pressure loads due to slamming phenomena in rough waves. The effects of elasticity & plasticity on such slamming loads are investigated through wet free drop test results of several steel unstiffened flat bottom bodies in the rectangular water tank. Also, their cumulative deformations by consecutively repetitive free drops from 1000 mm to 2000 mm in height are measured.

• 한국해양공학회지
• /
• 제19권4호
• /
• pp.15-20
• /
• 2005

This paper presented the development of a new experimental and numerical technique for the investigation of slamming impact. The in-house code was developed, based on the boundary element method. The application of commercial code was attempted using FLUENT. Pneumatic cylinder and LM-guide were introduced to closely simulate the free fall phenomenon. It was demonstrated that the proposed experimental and numerical studies can be useful tools in investigating slamming phenomenon.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권4호
• /
• pp.1082-1095
• /
• 2014

In this paper, a new criterion for the identification of slamming events is formulated. This criterion is based on the analysis of the high-frequency response, expressed in terms of the amidships VBM, which occurs after the slams. For this reason, it is named 'whipping' criterion underlining that is based on the analysis of global effects than on the kinematic description of the impact dynamics that was provided by Ochi criterion. Both the new 'whipping' criterion and the Ochi criterion are presented and compared also with respect to their practical application to the experimental data collected in the seakeeping tests with an elastic segmented model.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.229-233
• /
• 2002

This paper presents the results of slamming experiment using air pressure cylinder to increase the repeatability of the experiment. When it comes to the slamming experiment, the traditional way of doing it has been the free fall experiment. By adopting air pressure cylinder almost equal peak pressures were obtained with that of free fall experiment. Therefore, the air pressure cylinder can be an alternative tool in slamming experiment.