• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2013년도 제46회 KOSCO SYMPOSIUM 초록집
• /
• pp.87-90
• /
• 2013

In pulverized coal fired boilers, slagging and fouling may cause significant effect on the operational life of boiler. As increasing a consumption of low rank coal, slagging and fouling are main issues in pulverized coal combustion. This study predicts ash deposition propensity in a 0.7 MW pilot-scale furnace. Slagging model is employed as a User-Defined Function (UDF) of FLUENT and validated against measurement and prediction. The results show good agreement compared with experiment. There is need to development of a pulverized coal combustion and slagging analysis at low coal.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1999년도 제19회 KOSCO SYMPOSIUM 논문집
• /
• pp.27-46
• /
• 1999

Combustion test on two kinds of Indonesian sub-bituminous coals of single and blended with bituminous coal imported for power generation was carried out by using the test furnace at KEPRI. The main items of combustion test were temperature profiles of the inside furnace, the yield of unburned carbon, environmental pollution emissions, slagging/fouling tendency, and the comparison of heat loss of furnace. The test results showed that low sulfur and ash content characterized by the Indonesian coals were advantageous to environmental aspect, but high tendency of heat loss and slagging/fouling were disadvantageous to boiler operation. From the results, the necessity of proper coal blending to compensate these weak points was recommended.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.107-109
• /
• 2012

In Korean coal power plants, rising coal prices have recently led to the rapid utilization of low lank coals such as sub-bituminous coal with low calorific values and low ash fusion temperatures. Using these coals beyond the design range has resulted in important issues including slagging and fouling, which cause negative effects in boiler performances and unstable operations. The purpose of this study is to observe slagging and fouling characteristics resulted from burning various ranks of pulverized coals. We have tested 3 different coals: FLAME(bituminous), KCH(sub-bituminous) and MOOLARBEN(bituminous)coals in the pilot system $50kW_{th}$ scale. A stainless steel tube with preheated air inside was installed in the downstream in order to simulate water wall. Collected ash on the probe and the slag inside the furnace near burner were analyzed by SEM (scanning electron microscopy) to verify the formation degree, surface features and color changes of the pasty ash particles. Induced coupled plasma and energy dispersive X-ray spectroscopy were also performed to figure out the chemical characteristics of collected samples. As a result, KCH was observed that more slag was developed inside the walls of the furnace and on the probe than the other two kinds of coals, as shown in the calculate slagging and fouling indices as well.

• 한국연소학회지
• /
• 제4권1호
• /
• pp.67-83
• /
• 1999

The objective of this study is development of low emission pulverized coal combustor for reducing pollutant emission generated from coal combustion. Low emission combustion technology for reducing NOx and fly ash was investigated by using 2 stage coaxial cyclone combustor. Staged combustion was employed for NOx reduction and high temperature slagging combustion was also studied for fly ash removal in the combustor. The result of this study shows that the low emission combustion system can reduce the amount of atmospheric pollutions with improved boiler efficiency and performance.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
• /
• pp.293-298
• /
• 2006

There are many researches in progress on co-firing of coal and biomass to reduce carbon dioxide produced from the coal consumption. This study carried out 200 Kg/h combustion test furnace by mixing coal with timber. Coal was mixed with domestic and imported-wood around 10% to 20% based on input energy. For the mixed fuel, combustion temperature, unburned carbon and the composition of flue gas were analyzed. In addition, the tendency of slagging and fouling was examined using a probe. According to the result of the experiment, combustion temperature was depended on the kind of wood and mixing ratio. The unburned carbon loss was higher with increase of wood biomass mixing ratio, as a result, the total heat loss of furnace was slightly increased. The emission of NOx and SOx were decreased by $3{\sim}20%$ and $21{\sim}60%$ respectively. There are no difference of slagging and fouling tendency between biomass co-firing and coal burning only.

• 분석과학
• /
• 제5권4호
• /
• pp.433-441
• /
• 1992

국내의 23개 무연탄을 대상으로 석탄회의 화학분석 및 용융특성분석을 수행하여 석탄회의 화학조성과 용융온도와의 상관성을 고찰하였다. 또한 이들 무연탄을 미분탄 연소의 연료로 사용시 야기될 수 있는 slagging, fouling성을 예측하여 보았다. 국내 무연탄회는 대부분 $SiO_2$와 $Al_2O_3$를 80% 이상 함유하고 있는 반면 1% 이하의 적은 양의 $Na_2O$를 함유하고 있으며, 또한 비교적 높은 용융온도를 갖는다. 따라서 이 무연탄들을 미분탄 연소의 연료로 사용시 slagging 및 fouling 발생 가능성은 낮을 것으로 예측되었다. 국내 무연탄회의 용융특성은 base/acid ratio와 비교적 높은 상관성을 갖는 것으로 나타났다.

• 한국연소학회지
• /
• 제17권1호
• /
• pp.1-11
• /
• 2012

A slag building simplified model was developed to determine wall heat flux of a Shell 300 MW coal gasifier. In the model 4 layers(particulate, sintered, molten slag, solidified slag) were considered and mass conservation and energy balance were used to obtain each slag layer's thickness and surface temperature. Thermo-chemical and fluid charateristics of the gasifier were studied with and without considering the slag model using commercial CFD code FLUENT. Consideration of the slag layer did not affect syn-gas mole fractions. However, the slag layer caused to increase the exit gas temperature by about 50 K.

• 플랜트 저널
• /
• 제18권1호
• /
• pp.55-61
• /
• 2022

본 연구에서는 역청탄으로 설계된 870MW급 유연탄 화력발전소를 대상으로 발전기 출력, 연소조건, 통풍조건을 일정하게 유지하면서 역청탄과 아역청탄을 혼합하여 연소함에 따른 슬래깅 발생 영향을 분석하였으며, 이에 따른 보일러 성능에 영향을 주지 않는 허용 가능한 혼탄 방안을 제시하였다. 아역청탄의 혼합 비율을 10%, 20%, 40%, 60%, 80% 등으로 조정하여 원소분석, 공업분석, 회융점 변화, 슬래깅 지수 등을 확인하였고, 적정 혼탄 조건은 아역청탄은 40% 이하로 혼탄하고, 회의 산성분 대비 염기성분 비율은 0.4이하 또는 1이상, 총 알칼리는 3.5이하, 융점 슬래깅 지수는 1,345℃ 이상, 원소분석 시 회함량은 13% 이하, 공업분석 시 회함량은 15% 이하, 초기용융점은 최소 1,200℃ 이상이어야 바람직하다고 판단된다.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1998년도 춘계 학술발표회 논문집
• /
• pp.49-56
• /
• 1998

최근 국내의 에너지 수요는 특히 전기에너지 분야에서 급격한 증가추세를 보여왔으며 그 결과 전력생산을 위한 화석연료 중 특히 석탄의 사용량은 해가 갈수록 증가하였으며 이에 따라 다량의 대기오염물질과 온실가스 등이 발생하고 있어서 미래의 석탄 연소시스템들은 높은 열효율과 최소의 대기오염물질 배출을 필요로 하고 있다. (중략)

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1995년도 제2회 KOSCI Workshop
• /
• pp.91-103
• /
• 1995

In recent years, significant advances have been made in the development of methods to predict ash behavior in utility boilers. This paper provides an overview of methods used to assess and predict ash formation and deposition. It has discussed some of the key problems associated with the formation and deposition of ash during the combustion of pulverized coal. Although considerable progress has been made in understanding of the fundamental mechanisms of ash formation, transport, growth, and strength development, there is still much work to be done. There is a need to develop quantitative relationships between the characteristics of the entrained ash and the physical properties of ash deposits that influence deposit growth, strength development, and cleanability. Also data from bench-scale, pilot-scale, and full-scale units are needed in order to determine operating conditions which will minimize deposition problems, maximize efficiency, and reduce emissions.