• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
• /
• pp.151-155
• /
• 2006

The large amount of energy is consumed in a process for keeping the high temperature melting pool. For this reason, in addition to the wastes input to keep the high temperature melting pool, it is necessary for an auxiliary fuel and LOx to throw into the melting pool. So in this study, using a new melting furnace system, the experiments to keep the melting pool with minimal energy without throwing an auxiliary fuel and LOx was carried out. Also it is hoped that the results of the experiment will be available to analyze keeping a melting pool and behavior in a melting furnace.

• 품질경영학회지
• /
• 제21권2호
• /
• pp.242-253
• /
• 1993

The interpretation of the reaction mechanism is significant to produce the high quality welds and understand the welding processes. This investigation is important for the design of welding consumables and the selection of welding process parameters to develop the high quality welds. The objective of this study is to investigate the effect of electrochemical reactions on the transfer of alloy elements between slag and weld metal during submerged arc welding During submerged arc welding weld metal composition is shown to be controlled by two reaction mechanisms in four reaction zones. The responsible reaction mechanisms are thermochemical and electrochemical reactions. The possible reaction sites are the melted electrode tip, the detached droplet, the hot weld pool immediately below the moving electrode, and the cooling and solidifying weld pool behind the moving electrode. The possible reactions in submerged arc welding at different zones of the process is schematically shown in Figure 1.

• Journal of Astronomy and Space Sciences
• /
• 제20권3호
• /
• pp.205-216
• /
• 2003

회전안정화 로켓 모터를 이용하는 upper stage 위성체의 자세 불안정 현상을 연구하였다. 이 위성체는 대칭형의 본체와 내장된 유동질량으로 구성되며, 유동질량은 구진자로 모델링되었다. 종래의 선형모델이 갖는 단점을 보완하기 위해 정확한 시변 비선형 방정식을 사용하고, 본체 및 구진자 모두 회전 대칭축에 대해 정상상태에 있다고 가정하였다. 본 논문에서는 진자에 대한 준정상해(quasi-stationary solution) 및 공진조건을 파라미터의 함수로 결정하였다. 공진조건의 분석결과 유동질량은 계수자극 및 외부자극을 동시에 받으며, 자극을 받은 유동질량으로부터 에너지가 본체에 유입되면서 위성체는 불안정한 장동운동을 일으키는 것으로 확인되었다. 본 논문에서는 수치시뮬레이션 예시를 통하여 주어진 위성체 모델에 대해 발생가능한 공진조건에서 진자의 운동, 위성체 각 운동량 및 섭동모멘트의 관계 규명과 로켓모터 추진 후에 자세운동이 어떻게 변화하는가를 설명하였다.

• 해양환경안전학회지
• /
• 제3권2호
• /
• pp.23-31
• /
• 1997

The results of high speed photography, acoustic emission detection and plasma UV radiation intensity measurement during CO2 laser welding of stainless steel 304 are presented. Video images with high spatial and temporal resolution allowed to observe the melt dynamics and keyhole evolution. The existence of a high speed melt flow which originated from the part of weld pool and flowed along the sides wall of keyhole was confirmed by the slag motion on the weld pool. the characteristic frequencies of flow instability and keyhole fluctuations at different welding speed were measured and compared with the results of Fourier analyses of temporal acoustic emission (AE) and light emission (LE) spectra. The experimental results were compared with the newly developed numerical model of keyhole dynamics. (The model is based on the assumption that the propagation of front part of keyhole into material is due to the melt ejection driven by laser induced surface evaporation.) The calculations predict that a high speed melt flow is induced at the front part of keyhole when the sample travel speed exceeds several 10mm/s. The numerical analysis also shows the hump formation on the front keyhole wall surface. Experimentally observed melt behavior and transformation of the AE and LE spectra with variation of welding speed are qualitatively in good agreement with the model predictions.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.257-260
• /
• 2010

고체 추진기관 연소관 내열재의 숯 및 삭마 두께를 예측하기 위한 방법을 제시하였다. 내열재 두께를 계산하기 위해서는 열 및 구조 경계조건을 정확히 알아야 한다. 제안된 방법은 연소관에서 복사, 대류 및 $Al_2O_3$ 조건에서 내열 고무의 열분해 현상을 규명하는데 매우 유용하다. 간단하고 빠르게 고무계 내열재를 초기에 설계하기 위하여 단순화된 수식 과 실험이 사용되었다. 연소관 후방 돔 부위의 숯 및 삭마 두께를 예측하는데 이용이 가능하며 실제 연소 시험을 통하여 적용 가능성을 확인하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권3호
• /
• pp.282-292
• /
• 2007

The present paper describes the results of high speed photography, acoustic emission (AE) detection and plasma light emission (LE) measurement during $CO_2$ laser welding of 304 stainless steel in different processing conditions. Video images with high spatial and temporal resolution allowed to observe the melt dynamics and keyhole evolution. The existence of keyhole was confirmed by the slag motion on the weld pool. The characteristic frequencies of flow instability and keyhole fluctuations at different welding speed were measured and compared with the results of Fourier analyses of temporal AE and LE spectra. The experimental results were compared with the newly developed numerical model of keyhole dynamics. The model is based on the assumption that the propagation of front part of keyhole into material is due to the melt ejection driven by laser induced surface evaporation. The calculations predict that a high speed melt flow is induced at the front part of keyhole when the sample travel speed exceeds several 10 mm/s. The numerical analysis also shows the hump formation on the front keyhole wall surface. Experimentally observed melt behavior and transformation of the AE and LE spectra with variation of welding speed are qualitatively in good agreement with the model predictions.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2010년도 춘계학술발표대회 초록집
• /
• pp.51-51
• /
• 2010

Recently just as in the automobile industry, shipbuilders also try to reduce material consumption and weight in order to keep operating costs as low as possible and improve the speed of production. Naturally industry is ever searching for welding techniques offering higher power, higher productivity and a better quality. Therefore it is important to have a details research based on the various welding process applied to steel and other materials, and to have the ability both to counsel interested companies and to evaluate the feasibility of implementation of this process. Submerged-arc welding (SAW) process is usually used about 20% of shipbuilding. Similar to gas metal arc welding(GMAW), SAW involves formation of an arc between a continuously-fed bare wire electrode and the work-piece. The process uses a flux to generate protective gases and slag, and to add alloying elements to the weld pool and a shielding gas is not required. Prior to welding, a thin layer of flux powder is placed on the work-piece surface. The arc moves along the joint line and as it does so, excess flux is recycled via a hopper. Remaining fused slag layers can be easily removed after welding. As the arc is completely covered by the flux layer, heat loss is extremely low. This produces a thermal efficiency as high as 60% (compared with 25% for manual metal arc). SAW process offers many advantages compared to conventional CO2 welding process. The main advantages of SAW are higher welding speed, facility of workers, less deformation and better than bead shape & strength of welded joint because there is no visible arc light, welding is spatter-free, fully-mechanized or automatic process, high travel speed, and depth of penetration and chemical composition of the deposited weld metal. However it is difficult to application of thin plate according to high heat input. So this paper has been focused on application of the field according to SAW process for thin plate in ship-structures. For this purpose, It has been decided to optimized welding condition by experiments, relationship between welding parameters and bead shapes, mechanical test such as tensile and bending. Also finite element(FE) based numerical comparison of thermal history and welding residual stress in A-grade 3.2 thickness steel of SAW been made in this study. From the result of this study, It makes substantial saving of time and manufacturing cost and raises the quality of product.

• 한국분말재료학회지
• /
• 제16권5호
• /
• pp.326-335
• /
• 2009

Fe based (Fe$_{68.2}$C$_{5.9}$Si$_{3.5}$B$_{6.7}$P$_{9.6}$Cr$_{2.1}$Mo$_{2.0}$Al$_{2.0}$) amorphous powder, which is a composition of iron blast cast slag, were produced by a gas atomization process, and sequently mixed with ductile Cu powder by a mechanical ball milling process. The Fe-based amorphous powders and the Fe-Cu composite powders were compacted by a spark plasma sintering (SPS) process. Densification of the Fe amorphous-Cu composited powders by spark plasma sintering of was occurred through a plastic deformation of the each amorphous powder and Cu phase. The SPS samples milled by AGO-2 under 500 rpm had the best homogeneity of Cu phase and showed the smallest Cu pool size. Micro-Vickers hardness of the as-SPSed specimens was changed with the milling processes.