• 콘크리트학회논문집
• /
• 제23권2호
• /
• pp.177-184
• /
• 2011

이 연구에서는 PC 구조의 단부를 연속으로 연결한 MRS(multi-ribbed moment resisting slab) 구조에 대한 해석 및 설계법을 제안하고자 하였다. MRS 구조에서는 더블티 부재가 역티보 위에서 부모멘트 철근에 의해서 연속으로 설계되므로, 부모멘트 철근이 좁은 지역에 밀집되는 문제가 발생할 수 있다. 따라서 선형 및 비선형 해석을 통하여 모멘트 분포 메커니즘을 분석하여, 적절한 설계법을 제시하였다. 또한 이 연구와 병행하여 실시한 실험 연구의 결과를 비선형상세 해석을 통하여 분석하였다. 그리고 단부구속효과 및 모멘트 재분배에 관한 연구를 위하여 비선형 골조 해석을 선택하여 변수별 연구를 수행하였다. 해석을 위한 재질 및 단면의 특성은 함께 진행된 실험 연구의 결과로부터 얻어졌으며, 비선형 골조 해석을 위한 소성힌지는 균열 모멘트, 공칭 모멘트, 부재 연성도 등의 값으로 모델링되었다. 선형 및 비선형 해석의 결과로부터 단부 회전 스프링과 부모멘트재분재를 통하여 MRS 구조의 단부 모멘트는 상당한 크기로 감소시킬 수 있음을 알 수 있었다.

• 한국건설순환자원학회논문집
• /
• 제7권2호
• /
• pp.151-157
• /
• 2019

대도시에 시공된 콘크리트 교량의 경우 상부의 슬래브 및 PSC 거더가 같이 존재하고 있으며 설계 강도 및 국소적인 환경의 변동성으로 탄산화 거동이 다르게 평가된다. 본 연구에서는 46년간 사용된 PSC 거더교에 대하여 54개의 콘크리트 코어를 채취하였으며, 압축강도 및 탄산화 깊이 평가를 수행하였다. 설계 강도 24MPa인 슬래브와 35MPa인 I형 거더에 대하여 코어압축강도는 19.6MPa과 25.4MPa로 평가되어 각각 84% 및 73% 수준으로 조사되었다. 탄산화의 경우 상부에 대해서는 30.6mm의 탄산화 깊이와 32.9%의 높은 변동성을 나타내었다. I형 거더의 경우 상부에 비하여 16.7~17.0mm의 탄산화 깊이와 22.8~33.6%의 변동성을 나타내었다. I형 거더의 경우 상부 슬래브에 비하여 낮은 탄산화 깊이와 변동성을 가지고 있었으나, 하부구조에 비해서 높은 변동성을 가지고 있음을 알 수 있다.

• Earthquakes and Structures
• /
• 제7권5호
• /
• pp.719-733
• /
• 2014

The equivalent frame method (EFM) is widely used for the design of two-way reinforced concrete slab structures, and current design codes of practice permit the application of the EFM in analyzing the flat plate slab structures under gravity and lateral loads. The EFM was, however, originally developed for the flat plate structures subjected to gravity load, which is not suitable for lateral loading case. Therefore, this study, the first part of series research paper, proposed the structural analysis method for the flat plate slab structures under the combined gravity and lateral loads, which is named as the unified equivalent frame method (UEFM). In the proposed method, some portion of rotation induced in the torsional member is distributed to the flexibility of the equivalent columns, and the remaining portion is contributed to that of the equivalent slabs. In the consecutive companion paper, the proposed UEFM is verified by comparing with test results of multi-span flat plate structures. Also, a simplified nonlinear push-over analysis method is proposed, and verified by comparing to test results.

• Advances in concrete construction
• /
• 제5권5호
• /
• pp.451-468
• /
• 2017

The problem of reducing the self-weight of reinforced concrete structures is very important issue. There are two approaches which may be used to reduced member weight. The first is tackled through reducing the cross sectional area by using voids and the second through using light weight materials. Reducing the weight of slabs is very important as it constitutes the effective portion of dead loads in the structural building. Eleven slab specimens was casted in this research. The slabs are made one way though using two simple supports. The tested specimens comprised three reference solid slabs and eight styropor block slabs having (23% and 29%) reduction in weight. The voids in slabs were made using styropor at the ineffective concrete zones in resisting the tensile stresses. All slab specimens have the dimensions ($1100{\times}600{\times}120mm$) except one solid specimens has depth 85 mm (to give reduction in weight of 29% which is equal to the styropor block slab reduction). Two loading positions or cases (A and B) (as two-line monotonic loads) with shear span to effective depth ratio of (a/d=3, 2) respectively, were used to trace the structural behavior of styropor block slab. The best results are obtained for styropor block slab strengthened by minimum shear reinforcement with weight reduction of (29%). The increase in the strength capacity was (8.6% and 5.7%) compared to the solid slabs under loading cases A and B respectively. Despite the appearance of cracks in styropor block slab with loads lesser than those in the solid slab, the development and width of cracks in styropor block slab is significantly restricted as a result of presence a mesh of reinforcement in upper concrete portion.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.763-768
• /
• 2000

In this study, the tests were performed on a series of reinforced concrete strip specimens to investigate a cracking behavior of reinforced concrete voided slab bridge. Also, the mid-span deflections, the crack widths and failure mode of reinforced concrete strip specimens were studied. It was found that serviceability of cracking and deflection at reinforced concrete voided slab bridge which were constructed and designed under verifying serviceability as design criteria are lower than common reinforced concrete member. On the basis of the experimental results, it is more reasonable concrete to evaluate crack occurring $f_r=2.0\surd{f_{ck}}$ rather than modulus of rupture of concrete, $f_r=0.8\surd{f_{ck}}$

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.19-20
• /
• 2010

본 연구는 전이슬래브의 두께를 줄이고 철근량을 감소시키기 위해 포스트텐션을 전이슬래브에 적용하는 포스트텐션 전이슬래브에 관한 연구이다. 본 논문에서는 전이슬래브와 같이 두꺼운 판요소 해석에 적합한 Wood-Armer 공식과 부착 긴장재를 사용한 포스트텐션 설계방법을 제안하고자 한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.268-272
• /
• 2010

Recently the construction of railway sections passing the central area of cities and stations under railway lines are increasing, and then it is urgently required to take the countermeasures against the railway vibration and the second-phase noise radiated from it. The most efficient countermeasure, out of technologies developed up to now, is the floating slab track which is the track system isolated from the sub-structure by springs. In other countries, the source technologies for anti-vibration design and vibration isolator - one of key components - have been developed and many installation experiences have been accumulated. However, in Korea, since the system design technology and technologies for key components are not yet developed, the foreign system are being introduced without any adjustment, and the key component, vibration isolator, depends on imports. In this study, floating slab was divided into three spans, $k_{dynamic}$ use by examining reactions and member forces was to ensure safety.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.369-372
• /
• 2004

The design process of RC Slab includes multiple procedures such as structural analysis, member design, the production of calculation sheets, CAD, and itemized statements of quantities. The objective of this study is to develope an integrated design system that includes all the steps needed for RC Slab design, and as a result, to improve the quality and efficiency of the design process. In this study, the design steps are divided into structural modules and database, and each module and database is systematically combined for the complete design process. The developed design system is based on Web environment. Therefore it can be used in real time and reduces the design work time and space.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall
• /
• pp.343-350
• /
• 1999

The purpose of this study is to compare the response of the high-strength concrete beam-column-slab subassembly with the response of a normal-strength concrete specimens. Four assemblies were designed 2/3 scale beam-column-slab joint(fc'=240kg/cm2 fc'=700kg/cm2) and tested to investigate seismic behaviour. From the test results 1) flexral cracks emerge to inside of bean deeply for high strength concrete member 2) the high-strength specimens represented stable hysteretic behaviour for the displacement ductility 5.5 but degradation in stiffness and strength and unstable hysteretic behaviors were observed owing to the brittleness of high-strength concrete beyond its range.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.213-216
• /
• 2008

슬래브에 폴리스티렌을 이용한 경량폼을 적용할 경우, 슬래브 중량이 감소함에 따라 보다 경간이 증가하거나 슬래브 지지 부재 크기가 감소될 수 있다. 하지만 플랫플레이트 구조에서 경량폼을 사용한 슬래브는 기둥주위 위험단면에서의 뚫림전단성능이 저하될 수 있다. 그러나 이에 관한 내력산정을 위한 기준이 없으며, 기존 연구 또한 부족한 실정이다. 본 논문은 폴리스티렌 경량폼을 사용한 슬래브-기둥 접합부의 뚫림전단내력을 파악하기 위하여 실시한 뚫림전단 실험에 관한 것이다. 주요 변수는 기둥의 크기, 폴리스틸렌 폼의 배치형태, 전단보강 유무 등으로 총 4개 실험체를 계획하였다. 실험을 통하여 균열 및 파괴모드, 하중-변위곡선, 뚫림전단강도 등을 분석함으로써 경량폼을 사용한 슬래브의 뚫림전단 성능을 파악하였다.