• 폴리머
• /
• 제36권4호
• /
• pp.461-469
• /
• 2012

아르곤(Ar) 플라즈마 처리된 폴리프로필렌 복합소재의 표면 개질 및 특성 변화를 X-선 광전자 분광 분석(XPS), 적외선 분광 분석(FTIR), 주사 전자 현미경 분석(SEM) 및 접촉각 측정 등을 이용하여 조사하였다. Ar 플라즈마 처리 시간의 증가는 폴리프로필렌 복합소재 표면의 젖음성, 극성 관능기를 갖는 산소 성분, 탈크 함량 및 표면조도의 증가를 초래하였다. 주사 전자 현미경 분석을 통한 자세한 관찰은 폴리프로필렌 성분으로 구성된 표면층(skin layer)이 존재함을 확인하였다. 폴리프로필렌과 고무 입자간의 점도차는 표면층의 생성을 촉진시켰다. 하지만 Ar 플라즈마 처리시간의 증가는 표면층의 두께를 감소시키는 것을 확인하였다. 사출성형 공정 동안, 표면층을 제거할 수 있는 추가적인 방법론에 대해서도 토의하였다. Ar 플라즈마 처리에 의한 표면 개질 및 모폴로지의 변화는 폴리프로필렌 복합소재 표면 상에 친수화 상태를 부여하고, 이에 따라 젖음성 향상을 유도하였다.

• 실천공학교육논문지
• /
• 제16권1_spc호
• /
• pp.59-64
• /
• 2024

고령화가 심화되면서 암 발병률이 증가하고 있다. 피부 암은 외적으로 보이지만 사람들이 알아채지 못하거나 가볍게 간과하는 경우가 많다. 이에 초기 발견 시기를 놓쳐 말기의 경우 생존율이 7.5~11%로 사망에 이를 수 있다. 하지만 피부 암을 진단함에 있어 육안으로 진단하는 것이 아닌 정밀검사, 세포 검사 등 시간과 비용이 많이 든다는 단점이 있다. 따라서 본 연구에서는 이러한 단점을 해결하기 위해 Attention CNN 모델 기반 피부암 분류 시스템을 제안한다. 이 시스템은 전문의로 하여금 피부 암을 초기에 발견하여 신속한 조치를 취할 수 있도록 하는데 큰 도움을 줄 수 있다. 피부암 종류에 따른 이미지 데이터 불균형 문제에서 분포 비율이 낮은 데이터에는 Over Sampling 기법을, 분포 비율이 높은 데이터에는 Under Sampling 기법을 적용하여 완화하고 Attention layer가 없는 모델과 있는 모델을 비교하여 Attention layer가 없는 사전학습 모델에 추가한 피부암 분류 모델을 제안한다. 또한, 특정 클래스에 대하여 데이터 증강 기법을 강화하여 데이터 불균형 문제를 해결할 계획이다.

• 한국의류학회지
• /
• 제19권1호
• /
• pp.142-148
• /
• 1995

In this study, FVM (Finite Volume Method) which is one of the 2-dimensional numerical approach has been conducted to anticipate the temperature distribution between skin and clothes by the change of air temperature and fabric characteristics including fabric thickness. Several experimental works have been done to understand the thermal insulation effect (If fabrics on a human body by measuring the averaged temperature in the air layer between skin and clothes or by measuring the thermal resistance of fabrics. However, the formal method is inconvenient to measure the temperature distribution in the air layer to evaluate the insulation rate of the clothes on the skin because the real size of the clearance between skin and the clothes is too small to place the temperature sensor, and in the Tatter method the relationship between human body and the fabrics are ignored. However, the numerical method will be very effective and economical way to evaluate the insulation efficiency of clothes when the computational result is in the reliable range. As the result of this study, the temperature change in the sir layer between skin and clothes was linear to the fabric thickness and this result coincides with many previous experimental results. Moreover, it is possible to predict the optimum fabric thickness for the best thermal insulation in the air layer between skin and clothes.

• 공업화학
• /
• 제8권5호
• /
• pp.853-859
• /
• 1997

표면층에 치밀층 구배 구조를 갖는 비대칭 폴리에테르이미드막에 대하여 치밀 구조층의 화학적 개질을 통한 막 형태의 변화와 물/이소프로판올 혼합액의 투과증발 거동을 연구하였다. 치밀 정도는 증발 시간에 의해 조절되었고, 증발 시간이 0분에서 4분으로 증가되었을 때, 투과량은 감소하였고, 선택도는 증가하였다. 또한, 수산화나트륨 용액으로 개질 된 폴리에테르이미드막을 통한 투과증발 거동은, 치밀 표면층의 개질 시간이 증가될수록 선택성은 증가하였고, 투과량은 감소하였다. 전자현미경으로 확인된 형태 변화는 개질 시간의 증가에 따라 치밀 표면층의 density 증가를 보여주었고, 이러한 결과는 위의 관찰들과 일치하였다.

• Animal cells and systems
• /
• 제4권4호
• /
• pp.315-318
• /
• 2000

Structure of the skin in amphibious fish, Periophthalmus modestus, was described in relation to cutaneous respiration. The epidermis has no gland cell. The epidermis consists of three regions: outermost layer of one to five layers of flattened epithelial cells, middle layer of swollen epithelial cells instead of glandular cells and stratum germinativum of cuboidal cells. There are numerous blood capillaries in the outermost layer of the epidermis and diffusion distance between the blood of capillaries and the epidermis is about 1.4 Um. The middle layer of the epidermis appears to be a web-like structure due to the swollen epithelial cells. The stratum germinativum has a well-developed lymphatic space containing lymphocytes. There are numerous blood capillaries and elliptical area with acid mucopolysaccharides in stratum laxum of the dermis. The skin of Periophthalmus modestus may be an accessory respiratory organ for oxygen uptake during terrestrial or aquatic life.

• 대한기계학회논문집B
• /
• 제21권7호
• /
• pp.939-947
• /
• 1997

An experimental study of the skin friction measurement in a turbulent boundary-layer has been carried out. The skin friction measurements are made using the laser interferometer skin friction (LISF) meter, which optically detects the rate of thinning of an oil applied to the test surface. This technique produces reliable skin friction data over a wide range of flow situations up to 3-dimensional complicated flows with separation, where traditional skin friction measurement techniques are not applicable. The present measured data in a turbulent boundary-layer on a flat plate using the LISF technique shows a good comparison with the result from the previous velocity profile techniques, which proves the validity of the present technique. An extensive error analysis is carried out for the present technique yielding an uncertainty of about .+-.8%, which makes them suitable for CFD code validation purposes. Finally the measurements of the skin friction in a separated region after a surface-mounted obstacle are also presented.

• 한국정보전자통신기술학회논문지
• /
• 제6권4호
• /
• pp.249-254
• /
• 2013

In the area of computer vision, face recognition is being intensively researched. It is generally known that before a face is recognized it must be localized. Skin-color information is an important feature to segment skin-color regions. To extract skin-color regions the skin-color model based on multi-layer perceptron has been proposed. Extracted regions are analyzed to emphasize ellipsoidal regions. The results from this study show good accuracy for our vehicle driver face detection system.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2001년도 The Seoul International Simulation Conference
• /
• pp.255-259
• /
• 2001

A skin tissue system is considered, whose configuration is electrically modelled by a layer over the infinite half space. The problem is to estimate the layer\`s thickness and respective conductivity from the measured impedance between the electrodes placed on the skin surface. A simulation is taken place as the optimization problem which is to minimize the norm between the \"measured\" and the solution for the assumed parameters.arameters.

• 한국수산과학회지
• /
• 제36권2호
• /
• pp.107-112
• /
• 2003

Effect of PCBs on the skin and gill development of olive flounder, Paralichthys olivaceus were investigated by histological methodology and morphometric data. The olive flounder were exposed to limit concentration of effulent of PCBs (3.0 ${\mu}g/L$) for 60 days. Skin development can be classified into four stages: SSEL (simple squamous epithelial layer), MCA (mucous cell appearance) & CCA (club cell appearance) DLA (dermal layer appearance), and SEL (startification of epidermal layer) stages. Gill development had five stages: GFA (gill filament appearance), IGFE (identification of early gill filament epithelial cell) MCA (mucous cell appearance), PCA (pillar cell appearance), and FGL (formation of gill lamella) stages. The periods of structural completion of skin and gill were 22-30 days and 23-30 days after hatching in the exposure group respectively. The process of development of skin and gill of the exposure group was very similar to that of the control group. Therefore, PCBs (3 ${\mu}g/L$) have no influence on the development of skin and gill in the larval stage of olive flounder.

• KIEAE Journal
• /
• 제8권1호
• /
• pp.11-18
• /
• 2008

The purpose of this study is to analyze application methods and structural characteristics of each element of environment-friendly European housing through classification of skin types. The results of the study are following. 1) The skins are classified by three types; single skin with multi layers, double skin with single layer and double skin with multi layers. 2) Most single skins with multi-layer are composed with wooden louvers, sun blinds and insulating windows. There are introduction of atrium and balcony, and variation sectional space composition according to cases. 3) There are two types of double skins; to put cavity between inner skin and outer skin and more extensional spaces such as balconies, corridors and stair halls. Solar walls and mechanical ventilators are often introduced to double skins with multi-layer. 4) The functions of the latest environment-friendly skins are vary from controllers and buffers of indoor environmental elements such as temperature, light, air and sound to equipments to perform essential functions to efficiently operate HVAC systems.