The effects of calcium concentrations of coating bag treatment to reduce berry cracking were investigated through the changes of pericarp structure and berry cracking rate in 'Kyoho' grape. The soluble solids and anthocyanin contents in harvested grapes were highest at $18.1^{\circ}Brix$ and $2.56{\mu}g{\cdot}cm^{-2}$ in non bagging group compared with those of calcium coating bag treatments. The firmness of pericarp was lowest in non bagging group ($1.18kg{\cdot}5mm^{-1}{\O}$) compared with bagging treatments (1.23, 1.24, 1.27, $1.35kg{\cdot}5mm^{-1}{\O}$) which increased effectively in proportion to calcium concentration. As a result of histological observation of the fruit skin, the bagging with higher calcium concentration developed thicker epidermal and sub-epidermal layer of cell wall than that of non bagging. Moreover, the strengthened berry skin of calcium treatments effectively decreased berry cracking rate under critical turgor pressure. However, the 9% calcium coating bag treatment which was the most effective for cracking reduction seriously decreased marketability of harvested grape with white color staining on berry skin caused by eluted calcium from the coated paper bag. Based on our results, we recommend that 6% calcium coating bag be available for berry cracking reduction and higher quality production.
Song Jin;Chung Mi-Nam;Kim Jung-Tae;Chi Hee-Youn;Son Jong-Rok
KOREAN JOURNAL OF CROP SCIENCE
/
v.50
no.spc1
/
pp.141-146
/
2005
The objective of this study was to determine the characterisics of quality and antioxidant with various sweet potato(SP) varieties. The differences of skin color between general and colored SP was not significant. The flesh color of steamed SP was the lower than flesh of raw SP, and especially steamed purple SP(5.24) was lower than flesh SP(22.0). In physical characteristics, the hardness of raw SP showed the low values and the springness, gumness and hardness among steamed SP varieties was not significant. The total phenol content(TPC) of purple, yellow-fleshed and general SP had 13.1, 6.22 and 3.02 mg/g, respectively. In DPPH, the purple-fleshed SP had the highest free radical scanvering. Also, shingunmi$(88.5\%)$, Saengmi$(80.9\%)$ and Shinchunmi$(78.9\%)$ show the high antioxidant activities. The redness of SP was positively correlated with TPC in raw and steamed. However, the yellowness of flesh SP was negatively correlated with DPPH.
Environment-friendly agricultural products are consumed widely, but little is known about consumers' acceptability. The objectives of this study were to 1) determine consumers' acceptability of cucumber when consumed raw, 2) determine differences in appearance liking between environment-friendly and conventionally grown cucumber samples, and 3) analyze the physicochemical properties of cucumber. White dadagi, gasi, non-pesticide mini cucumber, organic gasi, and organic Joseon cucumber samples were evaluated for consumers' acceptability using a nine-point hedonic scale; White dadagi, organic Joseon, and organic gasi cucumber samples showed the highest acceptability scores. However, there were three consumer segmentations differing their degree of cucumber liking and preference. Consumers liked the appearance of organic gasi best. Consumers' preference of cucumbers did not change upon evaluation of the acceptability of the appearance of whole fruit with and without a label indicating an environment-friendly status. Additionally, the physicochemical properties of the cucumbers-including color (skin and flesh), length, circumference, weight, water activity, brix, and texture (hardness and fracturability)-were measured. All measurements showed significant differences among samples, with the exception of water activity and hardness. White dadagi was 3.8 brix, which was the highest among cucumbers, followed by non-pesticide mini cucumber and organic Joseon. White dadagi, organic Joseon, and organic gasi showed greater fracturability than the other cucumber samples.
Journal of the Society of Cosmetic Scientists of Korea
/
v.36
no.3
/
pp.227-231
/
2010
Among various make-up products, foundations are widely used to express clear and flawless skin. Foundations can be classified by its formula to 3 types, liquid foundation, powder foundation, and oil dispersion foundation. Powder foundations are easy to carry and use, so it is commonly possessed. In the R&D point of view, the developing method of powder foundations can be classified again to 3 types. Dry-process, baked-process, and the wet slurry-process. The fact that the wet slurry-process goes through either the back injection method or the front injection method is previously known. The front injection process is used as the main method in this study. We observed the quality dependence on the kind of solvent and the powder coating system. In brief, when water was used as the main solvent, the hardness increased than when volatile silicones or hydrocarbons were used. And the sensory results were shown to prefer volatile solvents (silicones or hydrocarbons) over water. Similarly, when the amino acid-coating system was applied, the hardness was shown to increase, when silicone-coating system shown no specific change. By these results, tailor-made powder foundations targeting specific customer grades can be easily produced.
Kim, Kyung-Hee;Park, Bock-Hee;Kim, Dong-Han;Cho, Hee-Sook
Journal of the East Asian Society of Dietary Life
/
v.18
no.3
/
pp.353-360
/
2008
This study evaluated the quality characteristics of dried noodles made of wheat flour supplemented with different concentrations of skate powder. Cooking quality, mechanical texture properties, gelatinization temperature and viscosity were measured, after which sensory evaluation was performed with prepared noodles. Water binding capacity, solubility and swelling power of the composite skate powder and wheat flours were higher than those of pure wheat flour. Gelatinization temperature of the composite skate powder and wheat flours increased, while initial, interim, and maximum-viscosity at $95^{\circ}C$, decreased, with increasing skate powder content. In relation to color values, increasing skate flour content led to decrease in L and b values and increase in a value. For the textural characteristics, the addition of skate powder increased hardness, springiness, chewiness and adhesiveness. Overall, noodles made with 3% skate powder were preferred compared to other samples.
Kim, In-Young;Lee, Joo-Dong;Ryoo, Hee-Chang;Zhoh, Choon-Koo
Journal of the Society of Cosmetic Scientists of Korea
/
v.30
no.2
/
pp.159-165
/
2004
This study described about method that forms liquid crystal gel (LCG) by main ingredient with hydrogenated lechin (HL) in O/W emulsion system. Result of stability test is as following with most suitable LCG's composition. Composition of LCG is as following, to form liquid crystal, an emulsifier used 4.0wt% of cetostearyl alcohol (CA) by 4.0wt% of HL as a booster. Moisturizers contained 2wt% of glycerin and 3.0wt% of 1,3-butylene glycol (1,3-BG). Suitable emollients used 3.0wt% of cyclomethicone, 3.0wt% of isononyl isononanoate (ININ), 3.0wt% of cerpric/carprylic triglycerides (CCTG), 3.0wt% of macademia nut oil (MNO) in liquid crystal gel formation. On optimum conditions of LCG formation, the pHs were formed all well under acidity or alkalinity conditions (pH=4.0-11.0). Considering safety of skin, pH was the most suitable 6.0${\pm}$1.0 ranges. The stable hardness of LCG formation appeared best in 32 dyne/$\textrm{cm}^2$. Particle of LCG is forming size of 1-20$\mu\textrm{m}$ range, and confirmed that the most excellent LCG is formed in 1-6$\mu\textrm{m}$ range. According to result that observe shape of LCG with optical or polarization microscope, LCG could was formed, and confirmed that is forming multi -layer lamellar type structure around the LCG. Moisturizing effect measured clinical test about 20 volunteers. As a result, moisturizing effect of LCG compares to placebo cream was increased 36.6%. This could predicted that polyol group is appeared the actual state because is adsorbed much to round liquid crystal droplets to multi-lamellar layer's hydrophilic group. It could predicted that polyol group is vast quantity present phase that appear mixed because is adsorbed to round liquid crystal to multi-lamellar layer's hydrophilic group. This LCG formation theory may contribute greatly in cosmetics and pharmacy industry development.
This study was carried out to investigate the possible for utilization of garbage in pig feed by investigating the functional characteristics of pork from pigs fed tangerine-peels. The samples consisted of the pork loin from pigs not fed with tangerine-peel (control), the pork loin fed with 3% and 5% tangerine-peel during growing and finishing period (TP-1), and fed with 6% and 10% tangerine-peel during growing and finishing period (TP-2) there is no respective comparison here. The pH, VBN content TBARS value, bacterial counts, surface color, water holding capacity, loss degree and rheological properties of the samples were determined by physicochemical properties, and the sensory scores were evaluated. The pH, TBARS value, surface color, water holding capacity and loss degree were not different among the samples, but the VBN content and bacterial counts of TP-1 and TP-2 were significantly lower than those of the control (p<0.05). The hardness, springiness, cohesiveness, gumminess and chewiness, taste, aroma, tenderness and juiciness were not different among the samples, but the shear force value and palatability of TP-1 were the highest among the samples (p<0.05).
Kim, Tae-Kyung;Yong, Hae In;Jang, Hae Won;Kim, Young-Boong;Sung, Jung-Min;Kim, Hyun-Wook;Choi, Yun-Sang
Journal of Animal Science and Technology
/
v.62
no.4
/
pp.587-594
/
2020
In this study, we examined the effects of various hydrocolloid (alginate, carrageenan, and konjac) treatments on the quality characteristics of cold-cut duck meat jelly. Seven different types of cold-cut duck meat jelly were prepared: control, without hydrocolloids; T1, 0.5% alginate; T2, 0.5% carrageenan; T3, 0.5% konjac; T4, 0.25% alginate + 0.25% carrageenan; T5, 0.25% carrageen + 0.25% konjac; and T6, 0.25% alginate + 0.25% konjac. The pH and moisture content of the cold-cut duck meat jelly with hydrocolloids was higher (p < 0.05) than that of the control. The highest lightness value was recorded for T4 and T6 (p < 0.05), and the hardness was lower (p < 0.05) in the meat jelly with hydrocolloids than in the control, except for T2 and T5. The springiness of the meat jelly was the highest (p < 0.05) in T1 and T4. The onset, peak, and end temperatures were the lowest (p < 0.05) in the control. The highest appearance score of the meat jelly was observed in T6, and its overall acceptability was higher (p < 0.05) than that of the control, indicating that, of all the treatments, 0.25% alginate + 0.25% konjac yielded the most desirable results. Thus, the combined use of duck skin and gelatin with alginate and konjac is potentially applicable for the development of new cold-cut duck meat products.
The physical properties of polymeric foams depend on the density of foams, physical properties of base polymers, the content of open cells, and cell structures including the size and its distribution, the shape of cell, and the thickness of skin layer. The foam density is affected by the chemistry of raw materials, the concentration of crosslinking agent and the blowing agent as well as the operating parameters during production process. In this study, the basic formulations of foams are composed of polyester polyol, MDI, amine catalyst, tin catalyst, silicone surfactant, and water. Cross-linking density of polyurethane was increased by using chain extenders. Also, the mechanical properties of polyurethane foam were improved by using the inorganic fillers (silica 1,2 and talc 1,2) having different $SiO_2$ contents and particle sizes. We investigated the properties of modulus, tensile strength, compressive strength and hardness of foams obtained by changing kind of inorganic filler and chain extender, and observed the distribution of inorganic filler as well as variation of cell size within the foams by electron microscopy.
Journal of the Korean Society of Clothing and Textiles
/
v.29
no.1
s.139
/
pp.79-90
/
2005
The purpose of this study is to find out the wearing conditions and cause of discomfort with shoes for male college students which will provide useful information fur the shoes manufacturer. The questionnaire survey was conducted on 346 male college students on purchasing practices, wearing conditions, and overall satisfaction with shoes. The results were as follows: Male college students have a tendency to have longer buying cycles and buy more expensive shoes compare to high school students. The order of criteria considered fer purchasing was shape, price, style coordination with clothing. The order of criteria considered for purchasing differed according to their major, economic status and purchasing place. Most of them have two pairs of white or black sports shoes and one pair of either black or brown dress shoes. The most popular material was man made leather but college students have more leather shoes than high school students. There were differences between high school students and college students in wearing conditions, how many they have, material and color. The varieties of shoes differed by season. They were satisfied with their shoes' design and color but unsatisfied with qualify or the material and durability of the shoes. Due to the pressure of the shoes, they experienced discomfort such as numbness, blisters on the feet and red skin. They experienced discomfort on the soles of the feet. The causes of discomfort were shape, width, hight of the heel, material and length in order. Dress shoes cause more discomfort than sport shoes due to the hardness of material, and flexibility of the sole. Since the material differed by the price, the degree of discomfort significantly differed by price too.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.