• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.2C
• /
• pp.112-118
• /
• 2011

In this paper, we conduct an objective performance analysis of the crosstalk cancellation scheme studied in [11]. While the conventional scheme is only applicable to a listener on the optimal listenable region (sweetspot), the space skew/crosstalk cancellation (SS/CC) scheme in [11] can mitigate crosstalk regardless of the listener's position by using listener position tracking (LPT) system. The SS/CC scheme is composed of two parts: LPT-based SS and CC parts. In this paper, the SS/CC scheme is evaluated by some criteria such as follows: condition number, and the balance characteristic, its root mean square error, and running average.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.1
• /
• pp.31-38
• /
• 2002

In order to improve the 0.35 $mutextrm{m}$-via hole etching process the etching characteristic of the gas $C_2F_{6}$ has been analyzed. The samples were triple-layer films(TEOS/SOG/TEOS) on 8-inch wafers and the orthogonal array matrix technique was used for the process. The equipment for etching was the transformer coupled plasma (TCP) source which is a type of high density plasma(HDP). This experiment showed the etching rate for $C_2F_{6}$ was 0.8 $mutextrm{m}$/min-1.1 $mutextrm{m}$/min and the measured uniformity was under $pm$6.9% in the matrix window. The CD skew comparison between pre and post-etching was under 10% which is an outstanding results in the window of profile in anisotropic etching. There was no problem in C2F6 with the flow rate of 20sccm, but when 14sccm of $C_2F_{6}$ was supplied there was a recess problem on the inner wall of SOG film. Consequently the etching characteristic of $C_2F_{6}$ shows a fast etching rate and a very wide process window in HDP TCP.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.1 no.2
• /
• pp.145-158
• /
• 1997

Method for synchronizing multimedia data is needed to support continuous transmission of multimedia data through a network in a bounded time and it also required for supporting continuous presentation of multimedia data with the required norminal playout rate in distributed network environments. This paper describes a new synchronization method for supporting delay-sensitive multimedia Presentation without degration of Quality of services of multimedia application. It mainly aims to support both intermedia and intermedia synchronization by absorbing network variations which may cause skew or jitter. In order to remove asynchonization problems, we make use of logical time system, dynamic buffer control method, and adjusting synchronization intervals based on the quality of services of a multimedia. It might be more suitable for working on distribute[1 multimedia systems where the network delay variation is changed from time to time and no global clock is supported. And it also can effectively reduce the amount of buffer requirements needed for transfering multimedia data between source and destination system by adjusting synchronization intervals with acceptable packet delay limits and packet loss rates.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.7
• /
• pp.595-601
• /
• 2001

We applied PIV method to obtain instantaneous and ensemble averaged velocity fields from the first row to the fifth row of a staggered tube bundle. The Reynolds number based on the tube diameter and the maximum velocity was set to be 4,000. Remarkably different natures are observed in the developing bundle flow. Such differences are depicted in the mean recirculating bubble length and the vorticity distributions. The jet-like flow seems to be a dominant feature after the second row and usually skew. However, the ensemble averaged fields show symmetric profiles and the flow characteristics between the third and fourth measuring planes are not so different. comparison between the PIV data and the RANS simulation yields severe disagreement in spite of the same Reynolds number. It can be explained that the distinct jet-like unsteady motions are not to be accounted in th steady numerical analysis.

• The KSFM Journal of Fluid Machinery
• /
• v.9 no.3 s.36
• /
• pp.7-13
• /
• 2006

Shape optimization of a rotor blade in a single-stage transonic axial compressor has been performed using a response surface method and three-dimensional Navier-Stokes analysis. Two shape variables of the rotor blade, which are used to define a blade skew, are introduced to increase an adiabatic efficiency. Throughout the shape optimization of a rotor blade, the adiabatic efficiency is increased to about 2.2 percent compared to that of the reference shape of the stator. The increase in efficiency for the optimal shape of the rotor is due to the pressure enhancement, which is mainly caused by moving the separation position on the suction surface of rotor blade to the downstream direction.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.543-544
• /
• 2006

Shape optimization of a transonic axial compressor rotor operating at the design flow condition has been performed using three-dimensional Navier-Stokes analysis and three different surrogate models: i.e.., Response Surface Method(RSM), Kriging Method, and Radial Basis Function(RBF). Three design variables of blade sweep, lean and skew are introduced to optimize the three-dimensional stacking line of the rotor blade. The object function of the shape optimization is selected as an adiabatic efficiency. Throughout the shape optimization of the rotor blade, the adiabatic efficiency is increased for the three different surrogate models. Detailed flow characteristics at the optimal blade shape obtained by different optimization method are drawn and discussed.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.31-34
• /
• 2003

In this paper, we describe a method for separating text lines in handwritten Korean address images. The most remarkable feature of the proposed method is to use a modified projection technique. named a partial projection technique. A projection based text line separation method which projects the whole address image in horizontal direction to find split points for text line separation cannot avoid failing separation in case of images with a little skew or overlap between vertically neighboring text lines. To overcome this problem, we have introduced a partial projection technique which splits an address image into a few partial address images to be equal width and then project them each horizontally. The experiment done with 989 handwritten Korean address images extracted from live mails shows the superiority of the proposed method. The correct text-line separation rate fir the testing images was about 91.5％.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.5
• /
• pp.1129-1136
• /
• 1994

A point heavy rainfall process is physically modeled. It uses meteorological variables at the ground level as its inputs. The components of the model are parameterized based on well established observations and the previous studies of cloud physics. Particular emphasis is placed on the efficiency of accretion. So we adopt the modified skew-symmetric model for hydrometeor size distribution function that is suitable for the heavy rain cloud. The dominant parameters included in the model are estimated by the optimization technique. The rainfall intensity is predicted by the model with the medium values of estimated parameters.

• Tribology and Lubricants
• /
• v.8 no.2
• /
• pp.26-34
• /
• 1992

This paper suggests a method to predict the flying state of the head slider in a hard disk drive (HDD) by using an optimization technique. The modified Reynolds equation for the hydrodynamic lubrication theory under the slip flow condition is used to describe the air-bearing system and a Finite Volume Method (FVM) is applied to solve the equation. Especially, Augmented Lagrange Multiplier (ALM) method is employed to find the minimum flying height, the pitch angle and the roll angle of the slider, which is shown to be faster and more general than the conventional update schemes. By using the proposed method, the variations of the flying state are analyzed as a function of the slider position in the direction of the disk radius for various disk velocities and skew angles.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2004.12a
• /
• pp.69-74
• /
• 2004

Selectivity estimation for spatial query is very important process in finding the most efficient execution plan. Many works have been performed to estimate accurately selectivity. Although they deal with some problems such as false-count, multi-count, they require a large amount of memory to retain accurate selectivity, so they can not get good results in little memory environments such as mobile-based small database. In order to solve this problem, we propose a new technique called MW histogram which is able to compress summary data and get reasonable results. It also has a flexible structure to react dynamic update. The experimental results showed that the MW histogram has lower relative error than MinSkew histogram and gets a good selectivity in little memory.