• Fashion & Textile Research Journal
• /
• v.20 no.4
• /
• pp.464-473
• /
• 2018

The objective of this study is to develop a sizing system of fitness clothing that can properly accommodate various body sizes of Korean senior women. The sizing system of upper and lower fitness clothing was developed in the present study by selection of key variables, identification of size category candidates, and determination of an optimal sizing system. First, key anthropometric dimensions (stature and bust circumference for upper clothing and stature; waist circumference for lower clothing) were identified by factor analysis on the direct body measurements (n = 272) and 3D whole-body scan data (n = 271) of Korean senior women in Size Korea. Second, sizing system candidates based on the key dimensions of upper and lower clothing were explored using a grid method and an optimization method. Lastly, among the sizing system candidates, optimal sizing systems of upper and lower clothing were selected in terms of accommodation rate. Five size categories (short/small, short/medium, tall/small, tall/medium, and tall/large) were selected as the optimal sizing systems of upper and lower clothing with 89% and 78% of accommodation rate, respectively, for the Korean senior women. The anthropometric characteristics of the representative humans of the optimal size categories would be of use in the design of fitness compressive wear for the better fit and effectiveness of exercise and health of Korean senior women.

• Journal of ILASS-Korea
• /
• v.19 no.3
• /
• pp.101-108
• /
• 2014

The current paper reviews the main characteristics and the operating principles of major fuel atomizers used for gas turbine combustors, including various empirical SMD equations for each atomizers. We have summarized various methodologies for evaluation of the combustion efficiency and for combustor sizing from the selected SMD data. It is found that the combustor sizing as well as the combustion efficiency are totally dependent upon the SMD calculation results, which means that special cares should be taken in choosing the SMD empirical equations.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.5 no.2
• /
• pp.69-73
• /
• 1981

With the advance of technology, the order-made clothes gradually give way to ready-made clothes. It is already well-known that more than 80 percentage of Japanese are choosing ready-made clothes while less than 5 persons out of 100 are spending their money and valuable time to have their clothes order-made in the United States. One of the fundamental steps to reach the system of mass production of clothes is recognized as a 'reasonable' sizing system. 'Reasonable' can be interpreted 'optimum' in the sense of minimum loss from both producers and customers. This paper desires the methodology to obtain the sizing system utilizing the human body measurement data, The suggested methodology could be extended to the sizing system for the design of other items including industrial equipments.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.24 no.5
• /
• pp.342-348
• /
• 2019

The emergency power supplies (EPSs) are required to increase battery sizing for protecting power source loss above designed criteria. This study proposes a sizing method for lithium-based batteries for EPSs in nuclear power plants on the basis of the calculation method for the required energy under variable conditions. The variable conditions are related with the characteristics of lithium-based batteries, such as the temperature of the location of EPS installation, aging, and design margin. The usage of lithium-based battery reduces the cost and installation space and enables the safe and long-term supply of power compared with the use of lead-acid battery.

• Fashion & Textile Research Journal
• /
• v.16 no.5
• /
• pp.766-775
• /
• 2014

This study is aimed to research the actual wearing condition of ballet dancewear of girls aged between 2 and 6 years on its design, size and fit. Survey data were collected from 171 mothers who have a girl learning ballet dance. The questionnaire was composed with ballet education, ballet dancewear purchasing, preference on design, size selection, and fitting. The collected data were analyzed with frequencies statistics, ${\chi}^2$-test, ANOVA using the SPSS WIN 20.0. The results are as follows; High rate of respondents said that the purpose of ballet education was for good body balance, leisure activity, and height growth. The main method of purchase was online shopping. The design, price, size and fit were identified as important ballet dancewear attributes for girls. The most preferred style of ballet dancewear were 'short sleeve skirted leotard' and 'camisole skirted leotard' which look like dress. The respondents reported slight satisfaction with size and fit, price, convenience in action, sewing and durability. The most preferred sizing system was code by height but any ballet dancewear makers don't use code by height. Therefore it is difficult for consumers to select size. Retailers and manufacturers could potentially use the results of this study to improve the sizing system and fit for children's ballet dancewear.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.1
• /
• pp.60-66
• /
• 1999

This study is to develop design sensitivity analysis method based on continuum theory for the actual buckling load of vehicle passenger compartment with respect to sizing design variables. For nonlinear structural analysis, both geometric and material nonlinear effects are considered. The total Lagrangian formulation for incremental equilibrium analysis and one-point linear eigenvalue problem for buckling analysis are utilized. Numerical methods are presented to evaluate design sensitivity expressions, using structural analysis results from FEM code. Optical design of vehicle passenger compartment with buckling constraint solved using Gradient projection method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.1029-1032
• /
• 2001

The purpose of this paper is to establish an automated die design system for compacting and sizing process required in Powder Metallurgy. Though the Powder Metallurgy(P/M) is a practical and economical forming technology, it needs long time and many trials and errors for die design. Such a problem can be solved by introduction of the automated die design system for P/M. In order to establish the system, collecting, classifying, and systematizing related knowledges from the experts in industries, books, and papers were performed. The system was constructed by AutoLISP, the language operated in AutoCAD atmosphere. This language can efficiently support for user to work on drawings. There are three modules ; P/M part specification input module, P/M part design module, and Die design module. A part for vehicle was applied to the system and satisfied results were achieved.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.2 s.161
• /
• pp.247-257
• /
• 2007

The purpose of this study was to develop men's garment sizing system, based on the anthropometric measurements called 'SizeKorea', which was surveyed between 2003 and 2004. The number of the survey subjects was 3,215 of males, who were from 18 to 69 years old. In the results, body types were assorted by drops, consisting of 4 upper body types and 2 lower body types. Height, chest, waist and hip were selected as the key dimensions of sizing system and the intervals of them were decided on statistical analysis of key dimensions, size intervals of ready-to wear clothes and sizing systems of other countries. In the results, older group or shorter height group had less differences between chest and waist as well as between waist and hip, but younger group and taller group had more differences. The size intervals for fitted jacket and coat were 3cm in chest and waist, while the intervals for fitted pants were 2cm in waist and hip. The intervals for not-fitted clothes were 5cm in chest, waist and hip, which 5 cm interval of height were applied, in all cases.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.7 s.155
• /
• pp.1146-1159
• /
• 2006

The purpose of this study was to offer body suit sizing system for young women aged 18-24. Many anthropometric measurements and other related data form 418 subjects were analyzed by various statistical methods. As a result of cluster analysis, we categorized somatotypes into 3 types: H-type, A-type, N-type as the most common. Subjects was covered 86.5% by KS body suit sizing system and 33.2% by body suit company. So we considered to produce AAA, AA cup size and small size body suit for raising the coverage. As size distribution by cluster analysis, H-type was mainly distributed ${70{\sim}85(AAA{\sim}D)}$ and M, L's hip size. A-type was mostly was ranged ${70{\sim}85(A{\sim}C)}$ and S, M size. N-type was widely showed ${65{\sim}85(AAA{\sim}I)}$ and S, M, L's hip size. Accordingly, it is reasonable to consider size distribution and physical characteristics by these figure types when suggesting sizing system as well as design and production.

• Fashion & Textile Research Journal
• /
• v.6 no.5
• /
• pp.634-640
• /
• 2004

Nowadays, the use of apparel CAD system is important to the mass production of ready to wear. Especially, computer-based grading is the most important process to improve the fitness of clothes and to reduce the time needed to make various size pattern. The purpose of this study was to suggest a standard sizing system for high school boys' pants and to suggest a grading method according to the sizing systems. The subjects were 217 high school boys of 16 to 18 year-old. The size intervals of waist girth and hip girth were 3 cm and 4 cm respectively. The sizing system, which had frequencies more than 4%, was classified 8 cases. Among them, 71-92 and 71-88 size were the most frequent size and were adopted the basic size for the two types of grading. According to the sizing system, hand-made patterns were manufactured. By measure of the each part of the slacks, 4 size's new grading-rule patterns were developed by each size. This result will contribute to clothing fitness of consumer and the amount of production.