In building demolition work, major dust-generating activities are blasting concrete and rock. The aim of this study was to find the characteristic of particle size of dusts which were generated during building demolition work using explosion. The DustMate of the Turnkey-Instruments Ltd. was used for particulate size-selective sampling of the four sites. TSP(Total Suspended Particle), PM10(Particle Matter $10{\mu}m$), PM2.5(Particle Matter $2.5{\mu}m$), and PM1.0(Particle Matter $1.0{\mu}m$) were measured during building demolition work using explosion. The large particulate (higher than the diameter $10{\mu}m$) showed to be higher than 50%. The particulate ranged from $10{\mu}m\;to\;2.5{\mu}m$ showed about 30-40%. PM2.5 was not scarcely detected in the samples collected for building demolition work using explosion. We conclude that the dust generated during building demolition work using explosion has not most respirable particulate.
This study evaluated the effects of the human activity and outdoor air on concentrations of size-selective particulate matters (PM) by conducting a realtime measurement in classrooms and on roofs at 4 elementary schools, 3 middle schools and 3 high schools in Incheon City. PM concentrations featured repetitive pattern of increasing during break time (including lunch hours) and cleaning time while decreasing during class hours. This trend was more prominent with inhalable PM and PM10 than fine PMs (PM2.5, PM1.0). The indoor/outdoor (I/O) ratio of inhalable PM and PM10 exceeded 1 while that of fine PMs was close to or below 1. The PM2.5 (out)/PM10 (out) ratio stood at 0.59 (${\pm}0.16$) and the PM2.5 (in)/PM10 (in) ratio was 0.29 (${\pm}0.09$), suggesting that occupant activity had a greater effect upon coarse particles (PM10-PM2.5) than upon fine particles (PM2.5, PM1.0). The correlations between the indoor and the outdoor PM concentrations showed a stronger positive correlation for fine particles than that of coarse particles. The linear regression analysis of PM concentrations indoor and outdoor indicated a higher determinant coefficient ($r^2>0.9$), and consistency for fine particles than in case of coarse particles. In conclusion, the results of this study suggest that the indoor coarse particle concentration is more attributed to occupant activity and the indoor fine particle concentration is more influenced by outdoor air pollution.
The purpose of this study was to evaluate airborne concentrations and characteristics of TSP, IPM, TPM and RPM in Seoul subway stations. Sampling was performed at 14 stations from April 11 to 29, 2002. Size-selective dust concentrations and metal concentrations were measured by gravimetric method and ICP-AES, respectively. The geometric mean of TSP, IPM, TPM and RPM concentrations in Seoul subway stations were 176$\mu\textrm{g}$/㎥, 348$\mu\textrm{g}$/㎥, 158$\mu\textrm{g}$/㎥ and 104$\mu\textrm{g}$/㎥, respectively. Dust concentrations in pathway were the highest and those in lobby were the lowest. The size distribution of dusts was significantly different by location of collection. When the deposition rate into pulmonary gas exchange region was estimated by size distribution, the deposition rate of dust collected from platform was higher than those of dust collected from lobby and pathway. The lower the basement levels were, the higher the deposition rates of dusts into tracheobronchial region and gas exchange region were. Copper and iron concentrations measured in platform higher were than those in other areas.
본 연구에서는, 노후된 엔진을 사용하는 트럭 및 특수차량에서 배출되는 NOx 및 PM을 동시에 제거하기 위해 SDPF 후처리 시스템 연구를 수행하였다. 우선, SDPF의 SCR 촉매를 선정하기 위해서, V/TiO2와 Cu-zeolite 촉매의 de-NOx 성능을 비교하였으며, SCR 촉매특성분석은 BET, XRD 및 NH3-TPD를 통해 분석하였다. 촉매 활성시험 결과, Cu-zeolite 촉매가 가장 우수한 내열성을 보여주었다. 최적의 SDPF 코팅을 위해서, 목표로 설정된 입자 크기에 맞추어 슬러리를 제조하였다. SCR 코팅량에 따른 SDPF의 코팅안정성과 배압 결과, SDPF 촉매를 로딩량별로 A, B, C 샘플을 제작하여 코팅안정성과 배압 및 de-NOx 성능을 비교한 결과 B 샘플에서에서 가장 우수한 결과를 보였다. 최적 SDPF 후처리시스템에 대해 엔진동력계 시험을 실시하였으며, 시험결과 Eu-5 규제를 만족하였다.
Kibet, Joshua;Bosire, Josephate;Kinyanjui, Thomas;Lang'at, Moses;Rono, Nicholas
Journal of Forest and Environmental Science
/
제33권2호
/
pp.113-121
/
2017
In flight particulate matter particularly emissions generated by incomplete combustion processes has become a subject of global concern due to the health problems and environmental impacts associated with them. This has compelled most countries to set standards for coarse and fine particles due to their conspicuous impacts on environment and public health. This contribution therefore explores forest fire emissions and how its particulates affects air quality, damage to vegetation, water bodies and biological functions as architects for lung diseases and other degenerative illnesses such as oxidative stress and aging. Soot was collected from simulated forest fire using a clean glass surface and carefully transferred into amber vials for analysis. Volatile components of soot were collected over 10 mL dichloromethane and analyzed using a QTOF Premier-Water Corp Liquid Chromatography hyphenated to a mass selective detector (MSD), and Gas Chromatograph coupled to a mass spectrometer (GC-MS). To characterize the size and surface morphology of soot, a scanning electron microscope (SEM) was used. The characterization of molecular volatiles from simulated forest fire emissions revealed long chain compounds including octadec-9-enoic acid, octadec-6-enoic acid, cyclotetracosane, cyclotetradecane, and a few aromatic hydrocarbons (benzene and naphthalene). Special classes of organics (dibenzo-p-dioxin and 2H-benzopyran) were also detected as minor products. Dibenzo-p-dioxin for instance in chlorinated form is one of the deadliest environmental organic toxins. The average particulate size of emissions using SEM was found to be $11.51{\pm}4.91{\mu}m$. This study has shown that most of the emissions from simulated forest fire fall within $PM_{10}$ particulate size. The molecular by-products of forest fire and particulate emissions may be toxic to both human and natural ecosystems, and are possible precursors for various respiratory ailments and cancers. The burning of a forest by natural disasters or man-made fires results in the destruction of natural habitats and serious air pollution.
조직공학은 기능을 상실한 인체를 대체하거나 복원하기 위해 인공대체품을 개발하기 위한 중요한 학문이다. 특히, 세포가 자랄 수 있는 지지체 역할을 하는 스캐폴드는 조직공학 연구를 위한 중요한 부분을 차지하고 있다. 그래서, 3차원 조직공학용 스캐폴드 개발을 위한 다양한 제조 방법을 소개하고자 하였다. 스캐폴드의 일반적인 제조방법으로는 염침출법 (solvent-casting particulate-leaching), 염 발포법 (gas foaming/salt leaching), fiber meshes/fiber bonding 법, 상분리법 (phase separation), melt moulding 법, 동결 건조법 (freeze drying)이 있으며, 넓은 표면적을 가진 스캐폴드 개발방법으로 전기방사법이 알려져 있다. 또한, 최근에는 스캐폴드 내부의 균일한 세포의 침투를 유도하기 위해 적당한 공극크기를 조절하고 우수한 공극률을 가진 스캐폴드를 개발하고자 stereolithography (SLA), selective laser sintering (SLS), fused deposition modeling (FDM), 및 3D printing (3DP) 와 같은 다양한 solid freeform fabrication (SFF) 기술이 개발되어지고 있다.
In this study, temperature, turbidity, suspended paniculate matter (SPM) distribution and mineral characteristics were investigated to explain spatial distribution of the turbid-water environment of Yongdam reservoir in July, 2005. Six stations were selected along a longitudinal axis of the reservoir and sampling was conducted in four depths of each station. Water temperature was showed the typical stratified structure by the effects of irradiance and inflow. Content of inorganic matter in suspended particles increased with the concentration of suspended particulate matter (SPM) due to the reduction of ash-free dry matter (AFDM). Turbidity ranged from 0.6 to 95.1 NTU and the maximum turbidity value of each station sharply increased toward downstream from upstream. The high turbidity layers were located at the depth between 12~16 m. Particle size ranged from 0.435 to $482.9{\mu}m$. day and silt-sized particles corresponded 91.9~98.9% and 1.1~8.0% in total numbers of SPM, respectively. Turbidity showed high correlations with clay (r=0.763, p<0.05) and silt content (r=0.870, p<0.05).Inorganic matter content (r=0.960, p<0.01) was more correlated with turbidity than organic matter (r=0.823, p<0.05). Mineral characterization using x-ray diffraction and electron probe microanalyzer demonstrated that the major minerals contained in the SPM were kaolinite, illite, vermiculite and smectite. As results of this study, surface water discharge as well as small size of the SPM were suggested as long-term interfering factors in settling down the turbid water in the reservoir.
분진과 질소 산화물을 동시에 처리할 수 있는 이원적 기능을 가진 촉매 필터는 산업체 적용에 많은 장점을 갖고 있다. 통기성이 높은 시트 형 세라믹 필터를 촉매 필터 소재로 활용하면 배기가스 처리 공정의 타당성을 더욱 높일 것이다. 그러나 시트 필터는 두께가 얇아서 촉매 지지층에 촉매를 부착할 수 있는 공간이 부족하므로 효과적인 촉매필터를 제조하기가 쉽지 않다. 본 연구에서는 국산 시트 필터를 사용하여 촉매 필터를 제조하고 실험실 장치에서 제조된 촉매 필터의 NO 환원 성능이 평가되었다. 현재 시판되고 있는 시트 필터로 촉매 필터를 제조할 경우 여과속도 $2m\;s^{-1}$에서 700 ppm NO 농도에 대한 NO 전환율이 92% 이하로써 촉매 필터 재료로써 좋은 특성을 나타내지 못했다. 이와 같이 저조한 특성을 보이는 이유는 시트 필터의 촉매 지지층의 기공이 균일하지 못하여 필요 이상의 큰 기공이 존재하기 대문으로 해석되었다. 필터에 존재하는 큰 기공의 사이즈를 줄이기 위하여 필터를 제조하는 원재료에 작은 입자를 혼합하여 시트 필터의 기공을 줄이는 효과를 통하여 NO 전환율 96% 이상을 달성하였다. 또한 촉매 지지체로써 큰 입자의 $TiO_2$를 혼합하여 촉매층의 기공을 팽창시켜서 개선된 촉매 필터는 상용 요구에 충족되는 98% 이상의 NO 전환율을 보였다. 위 두 경우 모두 촉매층 내에 존재할 수 있는 큰 기공을 효과적으로 메워서 적절한 촉매층이 형성되면 촉매 필터의 성능이 향상되는 결과를 보인 것이다. 따라서 이와 같이 통기도가 우수한 장점을 가진 시트 필터가 촉매 필터의 소재로 잘 활용될 수 있음을 보였다.
2008년 4월에서 2009년 1월 사이에 진동만 미더덕의 섭식 생태를 설명하기 위하여 $20{\mu}m$ 이상(coarse particulate organic matter, CPOM) 그리고 $0.7{\mu}m$ 이상 $20{\mu}m$ 이하(fine POM)의 크기가 나누어진 각각의 부유입자유기물과 미더덕에 대한 ${\delta}^{13}C$ 과 ${\delta}^{15}N$ 값의 월별 변동을 비교 분석하였다. CPOM과 FPOM의 ${\delta}^{13}C$ 및 ${\delta}^{15}N$을 월별로 비교한 결과 전체적으로 CPOM(평균 $-18.5{\pm}1.2$‰, $9.3{\pm}0.7$‰)이 FPOM(평균 $-20.5{\pm}1.5$‰, $8.4{\pm}0.5$‰)에 비해 유의하게 높은 값을 나타내었다. 미더덕의 ${\delta}^{13}C$과 ${\delta}^{15}N$ 값은 각각 평균 $-18.9({\pm}1.7)$‰과 $11.6({\pm}0.7)$‰로 나타났는데, 이와 같은 비값들은 CPOM 보다는 FPOM의 월별 변동과 비슷한 경향을 보여 이들이 CPOM에 비하여 상대적으로 FPOM에 더 높은 영양 의존도를 가진다는 것을 강하게 시사해 주었다. 그러나 미더덕의 먹이원으로서 CPOM과 FPOM의 상대적인 중요성은 시기에 따른 각 요소의 가용성(availability)에 크게 의존하는 것으로 나타났는데, 이와 같은 결과는 부유입자물질의 크기에 관계없이 미더덕에 의한 비선택적 먹이 섭식을 잘 반영하는 듯 하였다. 본 연구 결과는 미더덕의 지속적인 양식생산을 유지하기 위해 가용 먹이원으로서 식물플랑크톤과 함께 미소 부유입자유기물의 유용성을 고려해야함을 잘 나타내 주었다.
전기로 분진은 전기로법에 의한 고철처리량의 증가와 함께 매년 그 양이 증가하고 있다. 이러한 전기로 제강분진은 매립에 의한 처리가 주를 이루어 왔으나, 최근 매립부지의 부족과 중금속 용출 등에 의한 위해성에 의해 특정폐기물로 지정되어 이에 대한 처리에 관심이 고조되고 있다. 본 연구에서는 전기로 분진의 재활용 방안과 관련하여 이의 형상 및 입도분포, 성분물질 등을 분석하였으며, 재활용 가능한 유가금속의 하나인 Zn의 마찰대전분리에 관한 기초 연구를 시행하였다. 그 결과 입자의 형상은 구형, 비구형이 집적되어 있고 그 구성 성분으로는 $ZnFe_2$$O_4$, ZnO, Fe, Zn 및 FeO등으로 구성되어 있는 것으로 관찰되었다. 특히, 회수 대상인 Zn는 그 중량이 제강분진의 15~30wt%로 그 함량이 높아 회수하여 재활용하기에 가치가 높다고 판단되었다. 전기로 제강분진내의 성분 물질들은 각각의 일함수가 다름으로 인해 대전 특성이 다르게 나타났으며, 이를 이용하여 Zn의 품위를 더 높여 제강분진을 분리할 수 있었다. 제강분진의 성분물질을 각각 단일 시료로 하여 재질이 다른 중간하전물질로부터 총 Zn의 품위를 높이는데 가장 적절한 중간하전물질을 결정하였다. 전극판의 간격, 전압의 세기, 순환처리 등에 의한 분리변수 등이 마찰대전분리의 효율에 미치는 영향을 조사하여 최적의 조건을 도출하였다. 이 조건에서 마찰대전분리 후 분진에 함유되어 있는 Zn의 함량이 50wt%를 상회하는 제강분진을 분리 회수 할 수 있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.