• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.9
• /
• pp.25-31
• /
• 2008

The field of induction motor is magnetized and demagnetized for each reversal of the current. This field component of the motor accounts for most of the reactive component of inductive load. Reactive power needs to sustain the electromagnetic field required for the induction motor to operate. Power factor of induction motor is usually low and power factor correction needs. Power factor becomes low by the effect of the reduction operation of load capacity. In most cases, Capacitor capacity for the power factor correction should be complied with the recommendation by the motor capacity. But Capacitor value for power factor correction can't change during the normal operation. In this paper, we analyzed characteristics of power and power factor changing by load fluctuation of low-voltage small size induction motor and show that lower power factor correction's parameter of existing recommendation should be revised by new value.

• Korean Journal of Labor Studies
• /
• v.23 no.2
• /
• pp.47-77
• /
• 2017

This paper analyzes the changes in wage inequality and its contributing factors since the mid-2000s. Although trends vary by data and wage indices, the Gini coefficient of the total wage of all workers shows an increasing trend due to the part-time increase of less than 35 hours per week, while the wage Gini coefficient of hourly wages and the total wage Gini coefficient of full-time workers showed a declining trend. Part-time increases have increased inequality based on total wages, but part-time hourly wage increases can be considered to have reduced hourly wage inequality. Therefore, as a result of decomposing the factor of Gini coefficient reduction only for full-time workers, factors that contributed absolutely to inequality reduction were variables such as job tenure, career, and occupation, and employment type variable has little effects, and the establishment size variable deepens inequality. The variables such as industry, age, and education did not contribute significantly to the inequality change. This is attributed to the decline in wage premiums for job tenure and management and professional jobs and the increase in wage premiums for large-scale businesses.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.761-770
• /
• 2014

In september 2004 and 2006, topographical and sedimentological survey were carried out using multibeam echosounder, which were to investigate shape characteristics, temporal changes and control factors of the subaqueous dunes in the southern Gyeonggi Bay. The present tidal current and sedimentary characteristics of study area make conditions that the sizes (length and height) of large subaqueous dunes are developed and maintained sufficiently. The change of sedimentary characteristics over time, the decrease in grain size causes reduction in the height of very large subaqueous dunes. Therefore it shows that the grain size of surface sediments is a primary control factor in defining subaqueous dune sizes in the study area.

• Journal of Korean Society for Atmospheric Environment
• /
• v.12 no.4
• /
• pp.449-457
• /
• 1996

The main purpose of this study was to investigate sulfur dioxide removal performance of flue gas desulfurization system utilizing a Spray Absorption/Drying Reactor. In this system, the size of droplets was considered the most significant factor and tested using a PDA system. Lime slurry flow rate, operating temperature, calcium/sulfur (Ca/S) ratio and applied air pressure were selected as major operation variables and tested/analyzed in terms of system performance. The results are as follows. 1. The $SO_2$ removal efficiencies were 49%, 74%, 85% for Ca$(OH)_2$ slurry flow rate of 10, 20, 30 ml/min, which implies that the increase of slurry flow rate improves removal efficiency. The optimum slurry flow rate in this study was, however, considered 20 ml/min because of constraints of system troubles and absorbent utilization. 2. As Ca/S ratio increased, $SO_2$ removal efficiency was observed to increase. 3. As air pressure, at the atomizing nozzole, increased from 3 to 5 $kg/cm^2, SO_2$ removal efficiency increased from 74% to 80%, because of droplet size reduction due to pressure increase during atomizing process and the increase of surface area, helping mass transfer between gas and liquid phase.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.24 no.4
• /
• pp.237-243
• /
• 2019

A high-efficiency and small-sized switched-mode line transformer (SMLT) is proposed in this study. The conventional structure of an adapter is composed of line transformer and rectifiers. This structure has a limit in miniaturizing due to low-frequency line transformer. Another structure is composed of power factor correction (PFC) and DC/DC converter. This structure has a limit in reducing volume due to two-stage structure. As the proposed SMLT is composed of an LLC resonant converter, a high-frequency transformer can be adopted to achieve isolation standards and size reduction. This proposed structure has different operation modes in accordance with line input voltage to overcome poor line regulation. In addition, the proposed SMLT is applied to the front of a conventional PFC converter, because the SMLT output voltage is restored to rectified sinusoidal wave by using a full-bridge rectifier in the secondary side. The design of the PFC converter is easy, because the SMLT output voltage is controlled as rectified sinusoidal wave. The validity of the proposed converter is proven through a 350 W prototype.

• Journal of Environmental Science International
• /
• v.7 no.4
• /
• pp.501-504
• /
• 1998

The role of iron as a possible pathogenic factor in the Infection of V. vulnificus was examined in thins paper The effects of iron and $CCl_4$ on the growth of V. vulnificus in human and rabbit sera were also done. Injection of iron to mice resulted in a lowering of the 50% lethal dose and in a reduction in the time of death postinfection. Serum iron levels were also elevated by damaged livers with infections of $CCl_4$- The inoculum size required to kill these mice was directly correlated with serum iron Irvels. Iron appeared to be the limiting factor In the ability of thins organism to survive or grow in mammalian sera. These results, both in vitro and In vivo, provided strong evidence that iron may play a major role In the pathogenesis of V. vulnificus.

• Journal of Industrial Technology
• /
• v.26 no.B
• /
• pp.83-92
• /
• 2006

A probabilistic analysis model. one of reliability analysis methods introducing the concept of variables, was developed to investigate the uncertainty of dominant factors influencing the degree of consolidation in the radial consolidation theories. Based on the developed probabilistic analysis model, sensitivity study of those factors was performed to find their trends of affecting the degree of consolidation in the vertical drain method. Various radial consolidation theories, proposed by Barron(1948), Hansbo(1979), Yoshikuni(1979) and Onoue(1988), were used for this parametric study with the influencing factors such as size of smear zone, reduction ratio of permeability in the smear zone, discharge capacity, permeability for horizontal flow and coefficient of consolidation for horizontal flow. As results of this sensitivity study, for the given consolidation theory, contribution of each factor to the degree of consolidation was figure out and compared to each other. For the given value of each factor, the sensitivity to the degree of consolidation in the various theories was evaluated and their applicability and limitations were assessed.

• Journal of the Korean Dietetic Association
• /
• v.7 no.4
• /
• pp.410-425
• /
• 2001

This study was designed to assess the waste management practices, source-reduction programs and related tasks in elementary school foodservice in Seoul. and Kyonggi Province Areas. A questionnaire mailed to 910 school foodservice managers in Seoul and Kyonggi province: a 202% (N=184) response rate was obtained. About 83.7% of school foodservice managers were responsible for managing solid waste. Most foodservice operations take the responsibility of food waste but not packaging wastes. The average disposal cost per month per person was about 19 won and income was about 35 won. Leftovers were mainly disposed with platewaste. Platewaste was reused for the livestook feed(68.0%), and some platewaste was composted(11.6%). Source reduction programs implemented in half of school foodservice operations were adjustment of portion size', checking the plate waste', 'working with classroom teachers on waste reduction campaign', 'providing information leaflet on food waste minimization', posting education materials, 'classroom instruction about food waste minimization', and 'improving cooking method. According to factor analysis based on importance rating. slid waste management activities of elementary school foodservice operations were divided to 7 dimensions such as communication and cooperation with others', 'employee training', 'product quality control, 'yield control', plate waste control', 'purchasing', and 'public relations'. As a result of Important-Performance Analysis(IPA), sine dimensions such as 'communication and cooperation with others' and 'plate waste control were identified in Focus Here' quardrant area which need more enhanced performance.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.8
• /
• pp.5-14
• /
• 2013

Coarse granular geomaterials containing large gravels are broadly used for construction of large geotechnical systems such as dams, levees, railways and backfills. It is necessary to evaluate deformation characteristics of these materials for dynamic analysis, e.g. seismic design. This study presents evaluation of dynamic deformation characteristics of coarse materials using large scale resonant column testing apparatus, which uses specimens with 200 mm in diameter and 400 mm in height, and the effects of gradation characteristics on maximum shear modulus, shear modulus reduction curve and damping characteristics were investigated. From experimental study using rock-fill materials for a dam, we could see that the largest or mean particle size affects the shape of shear modulus reduction curve. When the specimens are prepared under the same conditions for maximum particle size, the coefficient of uniformity affects the confining stress exponent of maximum shear modulus. It could be concluded that the maximum particle size is an factor which affects shear modulus reduction curve, and that the coefficient of uniformity is for small strain shear modulus, especially for the sensitivity to confining stress.

• Journal of People, Plants, and Environment
• /
• v.23 no.6
• /
• pp.637-646
• /
• 2020

Background and objective: The main objective of this study is to measure the amount of particulate matter (PM) reduction under different characteristics of leaves in 18 different species of indoor plants. Methods: First, a particular amount of PM was added to the glass chambers (0.9×0.86×1.3 m) containing the indoor plant (height = 40 ± 20 cm), and the PM concentration were measured at 2-hour intervals. The experiment with the same conditions was conducted in the empty chamber as the control plot. Results: The range of PM reduction per unit leaf area of 18 species of experimental plants was 3.3-286.2 ㎍·m^-2 leaf, total leaf area was 1,123-4,270 cm², and leaf thickness was 0.14-0.80 mm and leaf size 2.27-234.47 cm². As time passed, the concentration of PM decreased more in the chamber with plants than in the empty chamber. Among the 18 indoor plants, the ones with the greatest reduction in PM2.5 in 2 hours and 4 hours of exposure to PM2.5 were Pachira aquatica and Dieffenbachia amoena. As the exposure time of PM increased, the efficiency of reducing PM2.5 was higher in plants with medium-sized leaves than plants with large or small leaves. The effect of reducing PM2.5 was higher in linear leaves than round or lobed leaves. Plants with high total leaf area did not have advantage in reducing PM because the leaves were relatively small and there were many overlapping parts between leaves. In the correlation between leaf characteristics and PM 2.5 reductions, all leaf area and leaf thickness showed a negative and leaf size showed a positive correlation with PM reduction. Conclusion: The PM reduction effect of plants with medium-sized leaves and long linear leaves was relatively high. Moreover, plants with a large total leaf area without overlapping leaves will have advantaged in reducing PM. Plants are effective in reducing PM, and leaf characteristics are an important factor that affects PM reduction.