• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.8
• /
• pp.569-576
• /
• 2007

The desiccant rotor is the most essential component of desiccant cooling system, but one of its drawbacks to spread out is rotor size. To reduce the size of rotor the analysis of rotor performance is crucial. Systematic examination on the effect of desiccant and channel geometries has been conducted based on the numerical program previously developed. Considered parameters related to channel geometries are channel shape and cross section area of channel, and parameters related to desiccant are mass fraction, heat capacity, density, maximum water uptake and separation factor of isotherm. Considerable reduction of rotor size is expected by adjusting the parameters.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.325-329
• /
• 2004

Linear size expanders have been studied in many fields for the practical use, which is possibility to connect large numbers of device chips in parallel communication systems. One major limitation on the efficiency of parallel computer designs has been the prohibitively high cost of parallel communication between processors and memories. Linear size expanders can be used to construct theoretically optimal interconnection networks. In current, the defined constructions have large constant factors, thus rendering them impractical for reasonable sized networks. This paper presents an improvement on constructing concentrators using an $(n,\;k,\;2rs/(r^2-s^2))expander,$ which realizes the reduction of the size in a superconcentrator by a constant factor.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.939-942
• /
• 2007

Vacuum cleaner is a close life product that can remove various dusts from our surroundings. However well vacuum cleaner clean our environments, many people are looking away from it, due to its loud noise. Its noise causes a big trouble in the usual life, for example, catch calls, TV watching and discussing etc. To reduce these inconveniences, noise reduction methods and systematic design of low noise vacuum cleaner are studied in this paper. At first, sound quality investigation is performed to get the noise level and quality that make people TV watching and catch calls available. Based on the European and domestic customer SQ survey result, sound power, peak noise level and target sound spectrum guideline are studied and introduced. As a second, precise product sound spectrums are designed into each part based on the sound quality result. Fan-motor, brush, mainbody, cyclone spectrums are decided to get the final target sound based on the contribution level. Fan-motor is the major noise source of vacuum cleaner. Specially, its peak sound, RPM peak and BPF Peak, cause the people nervous. To reduce these peak sounds, high rotating impeller and diffuser are focused due to its interaction. A lot of experimental and numerical tests, operation points are investigated and optimization of flow path area between diffusers is performed. As a bagless device, cyclones are one of the major noise sources of vacuum cleaner. To reduce its noise, previous research is used and adopted well. Brush is the most difficult part to reduce noise. Its noise sources are all comes from aero-acoustic phenomena. Numerical analysis helps the understanding of flow structure and pattern, and a lot of experimental test are performed to reduce the noise. Gaps between the carpet and brush are optimized and flow paths are re-designed to lower the noise. Reduction is performed with keeping the cleaning efficiency and handling power together and much reduction of noise is acquired. With all above parts, main-body design is studied. To do a systematic design, configuration design developments technique is introduced from airplane design and evolved with each component design. As a first configuration, fan-motor installation position is investigated and 10 configuration ideas are developed and tested. As a second step, reduced size and compressed configuration candidates are tested and evaluated by a lot of major factor. Noise, power, mass production availability, size, flow path are evaluated together. If noise reduction configuration results in other performance degrade, the noise reduction configuration is ineffective. As a third configuration, cyclones are introduced and the size is reduced one more time and fourth, fifth, sixth, seventh configuration are evolved with size and design image with noise and other performance indexes. Finally we can get a overall much noise level reduction configuration. All above investigations are adopted into vacuum cleaner design and final customer satisfaction tests in Europe are performed. 1st grade sound quality and lowest noise level of bagless vacuum cleaner are achieved.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.7
• /
• pp.49-57
• /
• 1994

An efficient approach for the computationtion of the optimum convergence factor is proposed for the LMS algorithm applied to a transversal FIR structure in this study. The approach automatically leads to an optimum step size algorithm at each weight in every iteration that results in a dramatic reduction in terms of convergence time. The algorithm is evaluated in system identification application where two alternative computer simulations are considered for time-invariant and time-varying system cases. The results show that the proposed algorithm needs not appropriate convergence factor and has better performance than AGC(Automatic Gain Control) algorithm and Karni algorithm, which require the convergence factors controlled arbitrarily in computer simulation for time-invariant system and time-varying systems. Also, itis shown that the proposed algorithm has the excellent adaptability campared with NLMS(Normalized LMS) algorithm and RLS (Recursive least Square) algorithm for time-varying circumstances.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.390-390
• /
• 2011

The size distribution of gold nanoparticles (NPs) is an important factor in their application to various fields of nanotechnology such as nanodevice fabrication, nanobio measurements, medical diagnosis, and so on, since the properties of nanoparticles depend on the size. As the pH of the reaction mixture was increased, the size distribution of gold NPs synthesized via sodium citrate reduction method was getting narrower and it finally became quite mono-dispersive when the pH was higher than ca. 7. 0.1M NaOH solution was used in controlling the pH, while the ratio between sodium citrate and HAuCl4 was fixed to 3:1 whose initial pH was about 5. Scanning and tunneling electron microscopy and UV/Vis spectrometry were used to characterize the resulting Au NPs. The change of the size distribution of the NPs was discussed with the change of the reaction rate related to the change of hydroxyl ion concentration.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.148-151
• /
• 2000

In recent years, security is essential factor of our safe network community. Therefore, data encryption/ decryption technology is improving more and more. Elliptic Curve Cryptosystem proposed by N. Koblitz and V. Miller independently in 1985, require fewer bits lot the same security, there is a net reduction in cost, size, and time. In this paper, we design high speed underlying field arithmetic processor for elliptic curve cryptosystem. The targeting device is VIRTEX V1000FG680 and verified by Xilinx simulator.

• Journal of People, Plants, and Environment
• /
• v.24 no.4
• /
• pp.377-387
• /
• 2021

Background and objective: To improve air quality, particulate matter (PM) can be reduced using green infrastructure. Therefore, in this study, we aimed to determine the particulate matter reduction potential of climbing plants used for green walls, an element of vertical green infrastructure. Methods: A sealed chamber with controlled environmental variables was used to assess the PM reduction level caused by climbing plants. PM concentration in the plant chamber was measured after two and four hours of PM exposure, and the reduction potential was assessed based on the leaf area. Results: Compared to the empty chamber (Control), the PM reduction speed per hour was higher in the plant chamber, which confirmed that climbing plants contribute to the reduction of PM in the air. The PM reduction speed immediately after exposure in the plant chamber was high, but this slowed over time. Additionally, PM has been continuously reduced in plants with large leaves. As a result of calculating the particulate matter reduction level based on leaf area, it was found that there was a difference by particle size. Actinidia arguta, Parthenocissus tricuspidata, Trachelospermum asiaticum, and Euonymus fortunei var. radicans showed a high reduction effect. The trichomes on the leaf surface of Trachelospermum asiaticum were found to affect PM reduction. Conclusion: PM adsorption on the leaf surface is an important factor in reducing its concentration. It was possible to compare different plants by quantifying the amount of PM reduction during a fixed time period. These results can be used as the basic data to select the plant species suitable for urban green walls in terms of PM reduction.

• Journal of the Korean Geosynthetics Society
• /
• v.15 no.4
• /
• pp.25-32
• /
• 2016

The two-dimensional (2D) analysis is widely used in geotechnical engineering for slope stability analysis assuming a plane-strain condition. It is implicitly assumed that the slip surface is infinitely wide, and thus three-dimensional (3D) end effects are negligible because of the infinite width of the slide mass. The majority of work on this subject suggests that the 2D factor of safety is conservative (i.e. lower than the 'true' 3D factor of safety). Recently, the 3D finite element method (FEM) became more attractive due to the progress of computational tools including the computer hardware and software. This paper presents the numerical analyses on rotational mode and translational mode slopes using the 2D and 3D FEM as well as 2D limit equilibrium methods (LEM). The results of the parametric study on the slope stability due to mesh size, dilatency angle, boundary conditions, stress history and model dimensions change are analysed. The analysis showed that the factor of safety in 3D analysis is always higher than that in the 2D analysis and the discrepancy of the slope width in W direction on the factor of safety is ignored if the roller type of W direction conditions is applied.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.3
• /
• pp.526-538
• /
• 2016

Breast cancer surgery result in changes in clothing style due to changes in the size of the breast as well as body shape. This study provides basic data as a fashion therapy to improve the quality of life for breast cancer patients who have to change clothing habits after surgery. The regression results found that the most important factor are pain and the amount of breast loss for clothes style changes after breast cancer surgery. Breast cancer patients suffer pain relative to the proximity to the date of surgery and regardless of the breast cancer resection range. However, the changes in clothes style relates to the amount of pain and breast reduction range. The t-test results on the change of the clothing styles for before and after breast cancer surgery showed that women significantly prefer comfortable clothes with sleeves and consider a closure style on clothes to put on and take off instead of clothes that are tight-fitting, have thin fabric or deep neck lines. Painful breast cancer results in women who prefer closure style on clothes, front closure clothes and garments that hide body shape. However, the larger reduction range of breast cancer patients and those with painful breast cancer prefer garments that hide body shape and are looser size clothes with sleeves.

• Korean Journal of Hydrosciences
• /
• v.7
• /
• pp.21-35
• /
• 1996

This Study is to develop the suitable hydrologic models for determination of the size and location of detention storage facilities to restrain stormwater runoff in urban areas. Hypothetical areas of two levels are considered to seize the hydrologic response characteristics. A one-square-kilometer ares is selected for the catchment level, and a 10-square-kilometer area consisting of 10 catchments is adapted at the watershed level as representative of urban drainage area. In this analysis, different rainfall freqyencies, land uses, drainage patte군, basin shates and detention storage policies are considered. Folw reduction effect of detention storage facilities is deduced from storage ratio and detention basin factor. A substantial saving in detention storage volumes is achieved 노두 the detention storage is planned at the watershed level rather than the catchment level. For the application of real watersheds, two watersheds in Seoul metropolitan area-Jamshil 2 and Seongnae 1-are selected on the basis of hydrologic response charactaristics. Through the regression analysis between dimensionless deterntion storage volume, dimensionless upstream area ratio and reduction rate of storage ratio, the regression equations to determine the size and location of detention storage faclities are presented.