• 한국공간구조학회논문집
• /
• 제7권1호
• /
• pp.71-78
• /
• 2007

본 논문은 인발공정에 의해서 만들어지는 스테인리스 강선의 제작 시에 필요한 인발기술에 관한 연구이다. 스테인레스 강선재는 표면이 아름답고, 표면가공을 다양하게 할 수 있으며 내식성 및 내마멸성이 우수할 뿐만 아니라 강도가 크고 가공선이 뛰어나고, 내화 내열성이 우수하여 건축물에도 많이 사용되는 볼트, 너트, 스크루우, 용접건, 와이어 로우프 등에 많이 사용된다. 대공간 연성 건축물에 특히 많이 사용되는 스테인리스 와이어의 제작 시에 최적의 다이스 설계 기준간을 찾아서 현장 적용이 용이 하도록 하였다. 스테인리스 와이어의 인발 생산 과정의 역학적 개념을 이해함으로서 와이어 로우프의 물리적 성질을 파악할 수 있다고 사료된다.

• 한국ITS학회 논문지
• /
• 제11권5호
• /
• pp.89-96
• /
• 2012

본 논문에서는 인터디지털 헤어핀 공진기를 이용하여 UTIS (도시 교통 정보 시스템)에 사용 가능한 저 위상잡음 발진기를 설계 및 제작하였다. 인터디지털 헤어핀 공진기는 기존의 소형화된 헤어핀 공진기에 인터디지털을 접목시켜 공진기의 물리적인 크기를 기존 대비 약 70%로 축소시켰고, 고조파 특성을 향상시켰다. 또한 132 의 높은 Q 값은 저 위상잡음 발진기 설계에 적합하다. UTIS 용 저 위상잡음 발진기는 5.75 GHz에서 출력 12 dBm 의 전력과 100 kHz offset 에서 -100.8 dBc/Hz 의 낮은 위상잡음을 얻었다. 이는 기존의 헤어핀을 이용한 발진기에 비해 12 dB 정도의 개선을 보여준다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.385-388
• /
• 2002

The researches of a two-phase atomizers have been carried out in the field of automotive and aerospace industries in order to improve the atomization performance of the liquid droplets ejecting from these nozzles. The smaller droplets have the advantages of the reduction of environmental pollution matter and effective use of energy through the improvement of heat and mass transfer efficiency. Thus, to propose the basic information of two-phase flow, an internal mixing atomizer was designed, its shape factor was 0.6 and the liquid feeding hole was positioned at the center of the mixing tube which was used to mix the air and liquid. The experimental work was performed in the field after the nozzle exit orifice. The measurement of the liquid droplets was made by PDPA system. This system can measure the velocity and size of the droplets simultaneously. The number of the droplets used in this calculation was set to 10,000. The flow patterns were regulated by ALR (Air to Liquid mass Ratio). ALR was varied from 0.1024 to 0.3238 depending on the mass flow rate of the air. The analysis of sampling data was mainly focused on the spray characteristics such as flow characteristics distributions, half-width of spray, RMS, and turbulent kinetic energy with ALR.

• Journal of the Korean Wood Science and Technology
• /
• 제43권1호
• /
• pp.25-35
• /
• 2015

본 연구에서는 국산 침엽수재의 육안 등급구분과 허용응력설정에 관한 국내의 학술논문을 정리하였다. 국립산림과학원 고시(KFRI 1995-27, KFRI 2000-39, KFRI 2007-3, KFRI 2009-1)를 활용하여 국산 낙엽송재의 육안 등급 구분한 연구를 비교한 결과 등급구분 비율이 연구자마다 상이했다. 보다 신뢰할 수 있는 등급구분 분류를 위해서 공증된 목재이용 기관에서 숙련된 연구자에 의한 등급구분을 시행하여야 할 것으로 사료된다. 허용응력설정에 관한 연구를 고찰한 결과, 연구자 마다 허용응력산출 방법이 ASTM D 245, KS F 2152, JAS 1990으로 모두 상이했다. 이는 침엽수 구조용재(KS F 3020)에서 기준허용응력을 제시하고 있지만 허용응력을 산출하는 명확한 방법이 제시되어 있지 않기 때문인 것으로 나타났다. 따라서 공식적인 허용응력 결정방법이 제정되어야 할 것으로 사료된다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권8호
• /
• pp.431-439
• /
• 1999

Among the variable-speed AC motor drive systems, the static slip power recovery system has been widely adopted in large power drives because a high efficiency drive can be obtained by recovering the slip power to the AC line. Although many improvements have been made in this system, several problems also remain such as the need of transformer in inverter AC side, which results in limiting speed control range and increasing the losses, production of reactive power by the control of inverter firing angle, harmonics in line currents, and so on. This paper presents the novel high performance slip power recovery system using the boost converter and small size filter in the rotor circuit, which recovers slip power of a wound rotor induction machine to AC supply efficiently with the aid of the boost converter, in which most of the problems in conventional system can be solved. The speed can be controlled by the duty ratio of the converter switch, not by inverter firing angle. As a results, the proposed system can operate in high power factor and the harmonic currents caused by the inverter and rectifier can be considerably suppressed. The validity of the proposed system verified by demonstrating the good agreement in the simulation and experimental results.

• 대한방사선기술학회지:방사선기술과학
• /
• 제21권1호
• /
• pp.29-34
• /
• 1998

The purpose of simple abdomen erect projection is to see the fluid level which indicates gastrointestinal ileus or free air due to perforation. we do not have to insist on low kVp technique in simple abdomen erect position as long as we can detect the fluid level and free air shadow. Therefore, the author tried to decrease patient dose by high kVp technique and to improve the image quality due to motion artifact by reduction of exposure time. [Methods] Experiment 1. * screen/film SRO1000/HRH * exposure factor : $140\;kvp{\pm}5\;kv$ with added filters, 200 mA, 0.01 sec * phantom : Acryles : 15.0 cm(equivalent to 17 cm body thickness) 17.5 cm(equivalent to 21 cm body thickness) 20.0 cm (equivalent to 25 cm body thickness) With the exposure factor for same film density($D=0.8{\pm}0.1$) and with the materials above, we tried to find out entrance skin dose and gonad dose for both male and female. Experiment 2. Burger's phantom radiography were checked to see whether there was any change of image quality according to the kVp and the added filters. Experiment 3. Using rotating meter(self made), we examined the motion artifact and the exposure time limitation. [Results and conculution] 1. Using high voltage technique of 140 kVp with added filter, Skin dose, testicle dose and ovary dose decrease to 89.3%, 47% and 71.4% respectively compare to 70 kVp technique, 2. No great changes of Burger's phantom image has detected as from 70 kVp to 140 kVp and the air hole size of Burger's phantom over 0.028 cc(Diameter 3 mm, hight 4 mm) can be distinghished. 3. 0.01 sec(1 pulse) exposure time is possible in the single phase full wave rectification that why we can quitely reduce the unsharness caused by patient's movement.

• 한국인구학
• /
• 제17권2호
• /
• pp.77-97
• /
• 1994

Despite the fact that the national family planning program in korea has accomplished its primary goals of fertility reduction and universal contraceptive use, the induced abortion is still high and there has been an increasing trend in the population sex ratio at birth. It seems that the changes in the imbalance of sex ratio have originated from traditonal boy preference. This indicates that much of the current family planning program can be overhauled, so that the program quality could be better controlled, by preventing the number of unwanted pregnancies and the imbalance of sex ratios. This paper aims, therefore, to examine the determinants of induced abortion through the investigation of pregnancy outcomes and their changes over time and to study the interaction between induced abortion, boy preference and the imbalance of sex ratio in Korea. The abortion rate had increased rapidly until the mid-1980s when there were about the same number of abortions as live births. Thereafter, the abortion rate has been maintained at this high level. By parity it shows a much higher abortion rate for a higher parity at all time. From the first parity, the sex composition of previous children stands out as the most important factor in deciding the pregnancy outcome at all time. The probability of a pregnancy ending in an abortion increases substantially when parents already had a son. The decline of the desired family size and the sustained strong son preference has made the sex of children a more important factor in the determination of the pregnancy outcome. Women's education has had consistently positive effects on the probability of a pregnancy ending in an abortion, but the effect shows a steady decline over time. The premarital pregnancy and urban residence also increase the abortion probability. This study suggests that the main concerns of the family planning program should be to strengthen the social support policies so as to weaken the son preference value leading to a balanced sex ratio and prevention of induced abortions.

• Clinical and Experimental Reproductive Medicine
• /
• 제48권4호
• /
• pp.322-336
• /
• 2021

Objective: Endometriosis is a chronic debilitating inflammatory condition characterized by the presence of endometrial tissues outside the uterine cavity. Pelvic soreness and infertility are the usual association. Due to the poor effectiveness of the hormone therapy and the high incidence of recurrence following surgical excision, there is no single effective option for management of endometriosis. Mesenchymal stem cells (MSCs) are multipotent stromal cells studied for their broad immunoregulatory and anti-inflammatory properties; however, their efficiency in endometriosis cases is still a controversial issue. Our study aim was to evaluate whether adipose tissue-derived MSCs (AD-MSCs) could help with endometriosis through their studied anti-inflammatory role. Methods: Female Wistar rats weighting 180 to 250 g were randomly divided into two groups: group 1, endometriosis group; established by transplanting autologous uterine tissue into rats' peritoneal cavities and group 2, stem cell treated group; treated with AD-MSCs on the 5th day after induction of endometriosis. The proliferative activity of the endometriosis lesions was evaluated through Ki67 staining. Quantitative estimation of interferon γ, tumor necrosis factor-α, interleukin (IL)-6, IL-1β, IL-10, and transforming growth factor β expression, as well as immunohistochemical detection of CD68 positive macrophages, were used to assess the inflammatory status. Results: The size and proliferative activity of endometriosis lesions were significantly reduced in the stem cell treated group. Stem cells efficiently mitigated endometriosis associated chronic inflammatory reactions estimated through reduction of CD68 positive macrophages and the expression of the proinflammatory cytokines. Conclusion: Stem cell therapy can be considered a novel remedy in endometriosis possibly through its anti-inflammatory and antiproliferative properties.

• 한국재료학회지
• /
• 제29권3호
• /
• pp.150-154
• /
• 2019

This study investigates the effect of MnO2 and CuO as acceptor additives on the microstructure and piezoelectric properties of $0.96(K_{0.5}Na_{0.5})_{0.95}Li_{0.05}Nb_{0.93}Sb_{0.07}O_3-0.04BaZrO_3$, which has a rhombohedral-tetragonal phase boundary composition. $MnO_2$ and CuO-added $0.96(K_{0.5}Na_{0.5})_{0.95}Li_{0.05}Nb_{0.93}Sb_{0.07}O_3-0.04BaZrO_3$ ceramics sintered at a relatively low temperature of $1020^{\circ}C$ show a pure perovskite phase with no secondary phase. As the addition of $MnO_2$ and CuO increases, the sintered density and grain size of the resulting ceramics increases. Due to the difference in the amount of oxygen vacancies produced by B-site substitution, Cu ion doping is more effective for uniform grain growth than Mn ion doping. The formation of oxygen vacancies due to B-site substitution of Cu or Mn ions results in a hardening effect via ferroelectric domain pinning, leading to a reduction in the piezoelectric charge coefficient and improvement of the mechanical quality factor. For the same amount of additive, the addition of CuO is more advantageous for obtaining a high mechanical quality factor than the addition of $MnO_2$.

• Nuclear Engineering and Technology
• /
• 제25권2호
• /
• pp.193-203
• /
• 1993

재장전노심의 핵연료 장전모형 설계를 위한 기존의 알고리즘 탐색방법의 단점을 보완하기 위한 새로운 경험적 탐색방법을 개발하였다. 노심의 핵연료 장전모형으로 고려될 수 있는 수없이 많은 경우의 수를 줄이기 위하여 일반적 핵연료 배치규칙, 영역별 배치방법 그리고 장전모형의 집단화 방법을 이용하였다. 비슷한 장전모형을 모아서 집단화시키는 기준으로 엔트로피 이론을 이용하였다. 또한 PROLOG언어를 이용하여 주어진 배치규칙에 따라 장전모형을 탐색하는 프로그램을 만들었다. 장전모형들의 노심내 출력분포 해석에는 2군 nodal코드인 MEDIUM-2D를 사용하였다. 이와같은 방법을 사용한 결과 수백개 정도의 장전모형 집단을 찾아낼 수 있었고, 여기에 가연성 독봉 배치규칙에 따라 가연성 독봉을 배치한 결과 장전모형 집단의 수를 수십개까지로 감소시킬 수 있었다. 이러한 장전모형 집단들로부터 실제로 이용 가능한 장전모형을 찾아내기 위하여, 주기길이 최대화방법과 첨두 출력 최소화방법을 사용하였다. 그 결과 고리 3호기 제10주기의 예상 재장전모형보다 주기길이는 길고 첨두출력은 낮은 장전모형을 찾아낼 수 있었다.