• 콘크리트학회논문집
• /
• 제12권6호
• /
• pp.99-108
• /
• 2000

The size effect on axial compressive strength in notched concrete specimens was experimentally investigated. Based on the concept of the fracture mechanics and size effect law, theoretical studies for axial compressive failure of concrete were reviewed, and two failure modes of concrete specimens under compression were discussed. In this study, experiments of axial compressive failure, which is one of the two failure modes, was carried out by using cylindrical specimens. Adequate notch length was taken from the experimental result of strength variation based on the notch length. And, by taking various sizes of specimens the size effect on axial compressive strength of concrete was investigated. Also, model equations were suggested by modified size effect law (MSEL). The test results show that size effect appears conspicuously for all series of specimens. Additionally, the effect of initial notch length on axial compressive strength was also apparent.

• 산업경영시스템학회지
• /
• 제36권2호
• /
• pp.17-24
• /
• 2013

This paper is to analyze the picking lead time for picking batch size in a warehouse system and to get minimum picking batch size that is the warehouse system feasible. The warehouse system consists of aisles and racks, which two racks face each other through aisle. The products are picked from the storage locations by batch size. The probability that items are picked in the each row of the rack in the aisle for order picking activity is derived. The picking lead time for picking batch size is the time passed from the first picking location to arrival at starting location in aisle picking all items included in a batch size. The picking lead time for picking batch size in an aisle is analyzed. The picking lead time for picking batch size in the whole warehouse system is obtained. The warehouse system is feasible if all items that customers order are picked from the storage locations for same period. The picking batch size that is the warehouse system feasible is obtained. The problem is analyzed, a solution procedure is developed, and a numerical example is shown to explain the problem.

• 한국국방경영분석학회지
• /
• 제12권2호
• /
• pp.56-67
• /
• 1986

This paper is concerned with a standard size system and production proportion of combat boots. For the standard size system foot sizes of 327 soldiers were mesured by Martin type anthropometric equipment. 24 foot measurements were obtained on all individuals. The standard size system of which key measurements are foot length and joint girth are proposed on the basis of the statistically treated measurement data. The production (or purchasing) proportion of the proposed size system of combat boots are also proposed.

• 산업경영시스템학회지
• /
• 제18권35호
• /
• pp.39-46
• /
• 1995

This study is to find the optimal lot size method in the distribution system. In general, the lot size methods used in the distribution system is the same as the methods of the MRP system. The lot size methods used in this study are LFL, EoQ, LTC and POQ.. Resulting in case study, LTC is the optimal lot size method in the distribution system. In distribution system, VRP and VSP shall be investgated.

• 센서학회지
• /
• 제22권3호
• /
• pp.181-184
• /
• 2013

Highly ordered porous materials having mesopores in the walls of macropores showed improved adsorption dynamics results for VOC molecules, especially bulky molecules. These meso/macroporous mataerials were synthesized by the dual templating method, and mesopore and macropore size were controlled by adjusting the templates for each pore size regime. In the case of adsorption and desorption of small VOC molecules (toluene), although meso/macroporous MCM-41 with smaller mesopore size showed improved results, meso/macroporous SBA-15 with larger mesopore size was not improved regardless of the existence of macropores, since there was no limitation of movement through the larger mesopore. However, the adsorption dynamics of bulky VOC molecules (p-xylene) over meso/macroporous SBA-15 were drastically improved by increasing the macropore size.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권3호
• /
• pp.307-315
• /
• 2001

Litter size has been one of the important economic traits in porcine reproduction. The insulin-like growth factor (IGF) system has been shown to mediate actions of the steroid hormone or to synergize with other endocrine factors so that it consequently plays roles in reproductive processes, including ovulation, implantation, maintenance of pregnancy, and fetal development. However, the effect of the serum IGF system on porcine litter size has not been deeply studied. Therefore, this study was conducted to relate serum IFG-II concentration and IGF binding protein-3 (IGFBP-3) expression with porcine litter size. Moreover, the possible association of those with estrogen receptor (ER) as a candidate gene for litter size was investigated. Swine were separated into two groups showing high and low litter sizes, and sera were collected from sows in the estrous cycle to postnatal growth of their female progeny. Serum IFG-II concentration was measured by radioimmunoassay and IGFBP-3 expression was detected by Western ligand blotting. During the estrous cycle, IGFBP-3 expression in both groups decreased moderately from metestrus to estrus, but IFG-II concentration showed a reverse pattern. Also, IFG-II concentration and IGFBP-3 expression decreased gradually as pregnancy proceeded. Unlike IGFBP-3, IFG-II decreased moderately as newborn pigs grew. Significant differences in serum IFG-II amount between the two groups were detected at 60 (p<0.01), 75, 90, and 105 d (p<0.05) of pregnancy and at 60 (p<0.01), 45, and 105 d (p<0.05) of postnatal growth. Furthermore, based on ER genotypes, a high litter size group with genotypes AB and BB showed lower IFG-II concentration than a low litter size group with a genotype AA during pregnancy. Taken together, the results indicate that the serum IFG-II and IGFBP-3 are correlated with the litter size in pigs.

• 한국분무공학회지
• /
• 제19권4호
• /
• pp.174-181
• /
• 2014

This study investigates the effects of nanoparticle size and temperature on the thermal conductivity enhancement of water-based alumina ($Al_2O_3$) nanofluids, using the centrifuging method and relative centrifugal forces of differing magnitude to produce nanofluids of three different particles without involving any dispersants or surfactants. We determined the coupling dependency in thermal conductivity enhancement relative to nanoparticle size and temperature of the alumina nanofluids and also experimentally showed that the effect of temperature on thermal conductivity is strongly dependent on nanoparticle size. Also, our experimental data presented that the effective medium theory models such as the Maxwell model and Hasselman and Johnson model are not sufficient to explain the thermal conductivity of nanofluids since they cannot account for the temperature- and size-dependent nature of water-based alumina nanofluids.

• 방사선산업학회지
• /
• 제8권1호
• /
• pp.29-34
• /
• 2014

Nanogels are internally cross-linked particles of sub-micrometer size made of hydrophilic polymers and are considered a distinct type of macromolecules, compared with linear and branched polymers or macroscopic gels. In this study, we studied a method of radiation induced synthesis of nanogels, which allows us to obtain tailored intra-molecularly crosslinked macromolecules of independently chosen molecular weight and dimensions. Thus, we report the possibility of applying the prepared nanogels using poly(acrylic acid) through electron beam irradiation for potential application as biomaterials. The nanogels were characterized by scanning electron microscopy (SEM). In addition, the size and zeta-potential of nanogels were measured by a particle size analyzer (PSA). The nanogels were prepared at an approximate size of 180 nm at 100 kGy and were spherical in shapes. The size of the nanogels decreased with increasing irradiation doses, and the absolute value of zeta potential increased with increasing irradiation doses.

• 폴리머
• /
• 제25권5호
• /
• pp.744-753
• /
• 2001

내충격성 폴리스티렌 (HIPS)의 내충격성에 영향을 주는 중요한 요소 중의 하나는 분산된 고무상 입자의 크기 및 입도분포이다. 본 연구에서는 반응조건이 HIPS의 고무상 입자 크기 및 입도분포에 미치는 영향을 관찰하기 위하여 HIPS를 중합 제조한 다음 고무함량, 교반속도 및 전중합 시간에 따른 고무상 입도분포 및 형태구조를 고찰하였다. 입도분석기로 분석한 결과, 톨루엔을 분산용매로 사용한 경우 열처리 온도가 낮을수록, 열처리 시간이 짧을수록 팽윤의 영향으로 고무상의 평균 입자경이 커졌지만, MEK의 경우에는 열처리 과정이 없어도 보다 합당한 입도분포를 얻을 수 있었다. 고무함량이 증가함에 따라 고무상의 평균 입자경은 뚜렷하게 커졌지만 고무함량이 적은 경우에는 교반속도가 증가하여도 평균 입자경은 그다지 큰 변화를 나타내지 않았다. 하지만 교반속도가 커짐에 따라 고무상 내의 폴리스티렌 포획입자는 크기가 균일해짐을 확인하였다. 또한 전중합시간에 따른 입도분포의 변화를 고찰한 결과 전중합 시간이 길어질수록 보다 작은 입도분포를 얻을수 있었다.

• Clinics in Shoulder and Elbow
• /
• 제16권1호
• /
• pp.53-57
• /
• 2013

목적: 임상 연구의 통계 분석에 있어서 표본수 산출의 의미와 기본 방식에 대해서 알고자 한다. 대상 및 방법: 자료의 분류, 연구 디자인 및 도출하고자 하는 결과의 성격에 따라 각기 다른 식을 적용시켜 표본수를 산출 한다. 결과: 표본수 산출은 임상 연구를 시작하기 전에 선행되어야 하며, 적절한 표본수 산출은 유의한 결론 도출에 필수 불가결하다. 결론: 표본수 산출은 에러나 작은 변수에 민감하기 때문에 특정 식에 적용시킬 때는 주의를 요한다.