• The Korean Journal of Malacology
• /
• v.29 no.1
• /
• pp.83-85
• /
• 2013

Size-mass relationships were estimated for 4 species belonging to genus Semisulcospira from the Guem River, Korea. These 4 freshwater snail species: Semisulcospira libertina, Semisulcospira coreana, Semisulcospira gottschei, and Semisulcospira forticosta. Between June and November 2011, samples were caught by dredge (mesh size 10mm of multifilament nylon, total length 4.35 m) at depths of < 2 m. Estimates of for parameter b of the size-mass relationship (W = $aSH^b$) ranged between 2.0072 (Semisulcospira libertina) and 2.3463 (Semisulcospira gottschei).

• Proceedings of the Korean Nuclear Society Conference
• /
• 1999.05a
• /
• pp.155-155
• /
• 1999

Pool boiling critical heat flux (CHF) have been investigated using plate type test sections with different widths (3 cm & 4 cm) and lengths (10 cm, IS cm & 20 cm) under various incli- nation angles. As the inclination angle increases from $0^{\circ}$ (horizontally facing downward plate) to $30^{\circ}$, CHF sharply increases. After that angle, CHF gradually increases with the increase of the inclination angle. There must be a transition angle between $0^{\circ}$ and $30^{\circ}$, at which the CHF increase rate remarkably changes. According to the comparison of present and previous ex- periments, the transition angle may be affected by heater size and increase with the increase of heater size. The size effect of heated surface on CHF is noticeable in the L15 & L20 series and W4 series; however, it seems to be difficult to find the size effect in L10 series and W3 series.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.678-679
• /
• 2006

The effects of particle size on the surface properties of hydro-thermally synthesized barium titanate powders were investigated by means of particle size analysis, specific surface area, SEM, zeta potential and XPS. Particle sizes were measured by laser light scattering and are in the range of 150 to 1100nm. Zeta potential increased with increasing particle size and it was large minus value in the range of particle size from 500 to 900nm, which seems to be related with the dissolution of $Ba^{2+}$ ion in these particle sizes from the analysis of surface properties by XPS.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.4
• /
• pp.635-641
• /
• 2010

In this paper, we propose an efficient public key broadcast encryption system which can also extend traitor trace and revoke system. Although the proposed system has limited collusion size, the ciphertext size in the system can be sublinear in the number of total users, the private key size is constant, the computational cost can be sublinear and it can support black-box tracing algorithm, therefore, our system can be an option to applications where reducing the ciphertext size, private key size is a top priority. Furthermore, we can also apply our system to military document broadcast system, because it has such an efficient measurement.

• Journal of the Optical Society of Korea
• /
• v.4 no.1
• /
• pp.58-61
• /
• 2000

Viewing zone shape and size perform a key role in creating viewing comfort for the viewer. The horizontal and vertical sizes of viewing zones, formed by a full color transmission type holographic screen with a stereoscopic image projection are investigated. The screens have been recorded as holograms of a narrow stripe shaped object with different width; to extend the vertical size of the viewing zone the holograms were exposed two times with the hologram shifting between exposures. The viewing zone parameters were measured as a function of the stripe width of the object and of the exit pupil size of projection optics for several holographic screens having the size of the 30 $\times$ 40 $\textrm{cm}^2$.

• Fashion Information and Technology
• /
• v.1
• /
• pp.81-88
• /
• 2004

• The Korean Journal of Applied Statistics
• /
• v.24 no.2
• /
• pp.393-400
• /
• 2011

In a large scale survey, cluster sampling design in which a set of observation units called clusters are selected is often used to satisfy practical restrictions on time and cost. Especially, a two stage cluster sampling design is preferred when a strong intra-class correlation exists among observation units. The sample Primary Sampling Unit(PSU) and Secondary Sampling Unit(SSU) size for a two stage cluster sample is determined by the survey cost and precision of the estimator calculated. For this study, we derive the optimal sample PSU and SSU size when the population SSU size across the PSU are di erent by extending the result obtained under the assumption that all PSU have the same number of SSU. The results on the sample size are then applied to the $4^{th}$ Korea Hospital Discharge results and is compared to the conventional method. We also propose the optimal sample SSU (discharged patients) size for the $7^{th}$ Korea Hospital Discharge Survey.

• Journal of Powder Materials
• /
• v.27 no.2
• /
• pp.103-110
• /
• 2020

Aluminum (Al) - based powders have attracted attention as key materials for 3D printing because of their excellent specific mechanical strength, formability, and durability. Although many studies on the fabrication of 3D-printed Al-based alloys have been reported, the influence of the size of raw powder materials on the bulk samples processed by selective laser melting (SLM) has not been fully investigated. In this study, AlSi10Mg powders of 65 ㎛ in average particle size, prepared by a gas atomizing process, are additively manufactured by using an SLM process. AlSi10Mg powders of 45 ㎛ average size are also fabricated into bulk samples in order to compare their properties. The processing parameters of laser power and scan speed are optimized to achieve densified AlSi10Mg alloys. The Vickers hardness value of the bulk sample prepared from 45 ㎛-sized powders is somewhat higher than that of the 65 ㎛m-sized powder. Such differences in hardness are analyzed because the reduction in melt pool size stems from the rapid melting and solidification of small powders, compared to those of coarse powders, during the SLM process. These results show that the size of the powder should be considered in order to achieve optimization of the SLM process.

• Korean Journal of Remote Sensing
• /
• v.34 no.4
• /
• pp.661-670
• /
• 2018

This study aims to develop a methodology of convolutional neural networks (CNNs) to produce thematic maps from remote sensing data. Optimizing the image size for CNNs was studied, since the size of the image affects to accuracy, working as hyper-parameter. The selected study area is Mt. Ung, located in Dangjin-si, Chungcheongnam-do, South Korea, consisting of both coniferous forest and deciduous forest. Spatial structure analysis and the classification of forest type using CNNs was carried in the study area at a diverse range of scales. As a result of the spatial structure analysis, it was found that the local variance (LV) was high, in the range of 7.65 m to 18.87 m, meaning that the size of objects in the image is likely to be with in this range. As a result of the classification, the image measuring 15.81 m, belonging to the range with highest LV values, had the highest classification accuracy of 85.09%. Also, there was a positive correlation between LV and the accuracy in the range under 15.81 m, which was judged to be the optimal image size. Therefore, the trial and error selection of the optimum image size could be minimized by choosing the result of the spatial structure analysis as the starting point. This study estimated the optimal image size for CNNs using spatial structure analysis and found that this can be used to promote the application of deep-learning in remote sensing.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.6
• /
• pp.244-251
• /
• 2005

The relationship between particle size of hydro-thermally synthesized barium titanate powders (BT01, BT02, BT03, BT04, BT05) and the powder properties was investigated by means of particle size, specific surface area, zeta potential, XPS, XRD and SEM. Particle size determined by laser light scattering is closely related with specific surface area and the tetragonality (c/a) obtained from XRD. The specific surface area of the samples inversely decreased with increasing particle size except BT03 powder. BT03 sample showed higher surface area than BT04 sample of equivalent particle size, which was attributed mostly to the agglomeration of particles in terms of SEM image and XRD analysis. Zeta potential increased with increasing particle size with the exception of BT02 and BT03 which showed larger minus value of zeta potential in comparison with other BT powders. Beta potential results of BT02 and BT03 are considered to be related with the dissolution of $Ba^{2+}$ ion in these powers which was examined by XPS.