• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.444-449
• /
• 2004

The design modification of bottom guide structures of the instrumented capsule, which is used for the irradiation test in the HANARO reactor, was required because of the trouble of the bottom guide arm's pin during irradiation. The previous structure with 3-pin arms was changed into the cone shape of one body. The specimens of the bottom end cap ring with three different sizes (${\Phi}68/70/72mm$) were designed and manufactured. The out-pile tests for the capsule with previous and new three bottom guide structures were performed in the one-channel flow test facilities. In order to evaluate the compatibility with HANARO and the structural integrity of the capsule, a loading/unloading, a pressure drop, a thermal performance, a vibration, and an endurance test were conducted. From out-pile test results, the capsule with the cone shape bottom guide structures was found to be more stable than the previous structure and the optimized size of the bottom guide structure selected was 70mm in diameter. It is expected that the new bottom guide structures will be applicable to all material and special capsules which will be designed and manufactured for the irradiation tests in the future.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.5
• /
• pp.481-488
• /
• 2010

Most public guide robots installed in public spots such as exhibition halls and lobbies of department store etc., have poor capability to distinguish the users who require services. As to provide suitable services, public guide robots should have a human detection system that makes it possible to evaluate intention of customers from their movement direction. In this paper, a DPS (Directional Perception System) is realized based on face detection technology. In particular, to catch human movement efficiently and reduce computational time, human detection technology using face rectangle, which is obtained from the human face, is developed. DPS determines which customer needs services of public guide robots by investigating the size and direction of face rectangle. If DPS is adapted, guide service will be provided with more satisfaction and reliability, and power efficiency also can be added up because public guide robots provide services only for the users who expresses their intentions of wanting services explicitly. Finally, through several experiments, the feasibility of the proposed DPS is verified.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.523-530
• /
• 2016

We use both theoretical analysis and simulations to study the impact of crosspoint-queued (CQ) buffer size on CQ switch throughput and delay performance under different traffic models, input loads, and scheduling algorithms. In this paper, we present the following. 1) We prove the stability of CQ switch using any work-conserving scheduling algorithm. 2) We present an exact closed-form formula for the CQ switch throughput and a non-closed-form but convergent formula for its delay using static non-work-conserving random scheduling algorithms with any given buffer size under independent Bernoulli traffic. 3) We show that the above results can serve as a conservative guide on deciding the required buffer size in pure CQ switches using work-conserving algorithms such as the random scheduling, under independent Bernoulli traffic. 4) Furthermore, our simulation results under real-trace traffic show that simple round-robin and random work-conserving algorithms can achieve quite good throughput and delay performance with a feasible crosspoint buffer size. Our work reveals the impact of buffer size on the CQ switch performance and provides a theoretical guide on designing the buffer size in pure CQ switch, which is an important step toward building ultra-high-speed switch fabrics.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1519-1522
• /
• 2009

We describe a 32" liquid-crystal display (LCD) with multi-touch sensing capability by integrating IR detector arrays onto the LED backlight plate. A transparent light guide is placed in front of the display screen, with IR LEDs disposed at its edges and emitting IR light into the light guide, the light is trapped by total internal reflection within the light guide to be as touch-sensing light. A physical contact with the acrylic plate surface will stimulate some trapped light to be escaped from the light guide and pass through LCD panel to be detected by the IR detectors. The touch-sensing LCD with this configuration can locate simultaneous multiple touche points on the touchable surface.

• Journal of the Optical Society of Korea
• /
• v.19 no.2
• /
• pp.159-164
• /
• 2015

In the injection-molded light guide plate the replication quality, i.e. the reproduction accuracy, of micro-patterns should be high and uniform over the entire surface area. However technical difficulty in meeting the necessary replication quality arises as the plate size becomes large for TV applications. We propose a simulation technique to optimize the distribution of micro-patterns on a 55-inch injection molded light guide plate considering non-ideal replication quality of micro-patterns. The luminance uniformity could be improved by more than 16% by optimizing the pattern distribution in spite of the same replication quality.

• Journal of Korean Home Economics Education Association
• /
• v.17 no.2
• /
• pp.113-128
• /
• 2005

The recommended dietary allowance(RDA) and food guide are the basic and the most important concepts for practical application of food and nutrition to the dietary life. For the textbook contents analysis on RDA and food guide, 10 kinds of Technology and Home Economics middle school textbooks were examined. And a total of 283 students from 2 middle schools in Kyungkido were recruited for the analysis of students' understanding on RDA and food guide. The results o( this study were as follows. First, students were aware of food, nutrition and diet section in the middle school textbook as interesting, valuable. and easy to understand. Second, the explanation on RDA, which is the intake level of nutrients adequate to meet the needs of practically all healthy people, were not clear and enough in almost all the middle school textbooks examined. The definition of food guide was not firmly established in anywhere including the middle school Technology and Home Economics textbooks examined. Third, about 2/3 of students did not know the difference between RDA and physiological requirement. And $1/3\~2/3$ students did not know which food belongs to which food group, less than 1/3 students gave correct answer on food amount contained in single serving size, except bread, noodle and fish. As result, the RDA and food guide concepts were not throughly explained in middle school textbooks. which resulted in misconception to many students. Thus, accurate and detailed explanation on RDA and food guide should be included in the middle school Technology and Home Economics textbooks, so that to help application to healthy eating in the future daily dietary life.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.1068-1072
• /
• 1997

This work deals with on investigation the influence of various additives to a base stock cutting fluid in order to develop a better deep hold drilling. This investigation has been aiming at developing an oil which gives a maximum cutting efficiency at a minimum wear rate of the tool and the guiding pads. The purpose of study is to analyze how guide pad of tools, workpiece and the change of contained quantity of extreme pressure additive in cutting fluids have effects on the hold over size of cutting hole, surface roughness of workpiece,wear rates of guide pad and roundness during the deep hole machining of SM55C with solid BTA drill by using BTA drilling system through experiment. Conclusion reached is as follows. It has been proved that the contained quantity of surphur more affects machinability than that of extreme pressure additive of chlorine of cutting fluid in BTA drilling during Deep Hole Drilling. Considering its base oil, the the contained quantity of extreme pressure assitive of surphur can be different, but it's judged that the range of 1.5 ~ 2.0% is suitable to machinability for workpiece in BTA drilling. Regarding guide pad, it's judged that the reduction of wear is possible in propotion to the contained quantity of exrreme pressure additive of chlorine against supporting of cutting force and Bumishing operation of machining parts in cutting.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.12 no.3
• /
• pp.9-16
• /
• 2016

This study had the purpose on feasibility judgment through performance forecast of wind power generation system using the cross flow vertical type wind power turbine for the situation of domestic small size wind power technology development. Wind power generation system uses the principle of venturi tube that gathers the wind through the first guide vane, and second guide vein changes the angle of the wind simultaneously by playing the role of venturi tube. After this, wind got out from the second guide vane spins the wind power turbine and has the meaning of judging on the aspect of numerical interpretation the feasibility for the small size wind power generation through wind power generation system that comes out from the back.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.91-94
• /
• 2006

In this paper, in order to get micro or nano size optical patterns, an analytical and experimental investigation on a LGP (light guide plate) injection molding process has performed. The LGP, which diffusing and emitting the light from the CCFL or the LEDs to the panel front direction uniformly, typically has an under 1mm thick base substrate and numerous 60 to $170{\mu}m$ width and 6 to $10{\mu}m$ thick dot patterns on it. Generally, the small size LGPs, for mobile devices, have been and are being made of PMMA through the injection molding process. However, the substrate thickness and the dot pattern size are decreasing, it becomes hard to fill the micro to sub-micro cavities completely. To investigate the flow behavior of resin in micro/nano cavities and identify the characteristics of the LGP injection molding process, we carried out the flow analyses with respect to the variations of the substrate thickness, the dot pattern size and the pitch of a cavity.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.4
• /
• pp.451-458
• /
• 2011

Objective: This study is to develop a design and evaluation guide to the ergonomic design of the farm working convenient equipments in order for the elderly to use them easily and safely. Background: The aging population has already increased in farm villages. But due to the usage of the farm working equipments that did not reflect the characteristics and functional changes of aging, accidents and patients with disease are increasing. Method: The study investigated the functional changes and physical, cognitive, and sensuous characteristics of the aged. By determining the criteria for classification of the convenient equipments by crop, and by finding out the items necessary for the ergonomic design, a guide to this study is proposed. Results: It is obvious that the physical, cognitive and sensuous functions change as the aging process continues. Therefore, for the design and evaluation of Control Panel, Control Lever, Frame Size, Shape, and Equipment Weight that are the necessary items for the ergonomic approach for the farm working equipments, such characteristics have to be reflected. Conclusion: Through this study, a guide to the design and evaluation of convenient equipments for the farm works that reflected the aging characteristics and functional changes has been proposed. Application: The result of this study is to expect not only designers but also related specialists to make the best use of it.