• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.258-261
• /
• 2001

High Power factor Active Filter converter is used for Inverter Air conditioner power supply to meet IEC standard. In the active filter topology for power factor, extra switch just control the input current indirectly to meet the IEC standard for reducing the cost and size. In this paper, low cost converter was suggested by simulation using extra switch which auxiliary pulse is inserted and quasi resonant soft switching topology control is adapted for panel's inverter air conditioner converter Inserting auxiliary Pulse method to the extra switch has the benefit of reducing THD by low cost input control circuit. And also quasi resonant soft switching topology can reduce switching loss. So both technical is suitable for Panel's Air conditioner.

• Journal of electromagnetic engineering and science
• /
• v.17 no.2
• /
• pp.51-56
• /
• 2017

This study proposes a modeling process of equivalent terrains to reduce the computational load and time of a full-wave electromagnetic (EM) simulation. To verify the suitability of the proposed process, an original terrain model with a size of $3m{\times}3m$ is equivalently quantized based on the minimum range resolution of a radar, and the radar image of the quantized model is compared with that of the original model. The results confirm that the simulation time can be reduced from 407 hours to 162 hours without a significant distortion of the radar images, and an average estimation error of the quantized model (20.4 mm) is similar to that of the original model (20.3 mm).

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.4B no.3
• /
• pp.108-113
• /
• 2004

This paper presents methods to improve performance of the power supply system in a NASA deep space explorer. In the Stirling engine driven reciprocating Brushless DC (BLDC) generator, the accurate position information of the prime mover is important to diagnose the performance of the engine and prevent distortion of the output power. Since sensors to detect the position are fragile and unreliable, and conventional sensorless techniques have drawbacks in the low speed region, a novel sensorless position detection technique for the prime mover has been proposed and verified. Another major issue of the generator for the spacecraft is power density maximization. The mass of the power system is important to the mass of the satellite. Therefore, the components of the spacecraft should be lightweight. Conventional rectification methods cannot achieve the maximum power possible due to non-optimal current waveforms. The optimal current waveform for maximizing power density and minimizing machine size and weight in a nonsinusoidal power supply system has been derived, incorporated in a control system, and verified by simulation work.

• Journal of Power Electronics
• /
• v.15 no.2
• /
• pp.497-503
• /
• 2015

This paper analyses the harmonic pollution to power grids caused by several high-power rectifiers, summarizes the requirements for rectifiers in suppressing grid-side current harmonics and optimizes a new-type of current source PWM rectifier with a hybrid switch. The rectifier with a hybrid switch boasts significant current characteristics and cost advantages in the high-power area. To further enhance the working frequency of the current source rectifier with a hybrid switch for suppressing grid-side harmonics and reducing the inductance size, this paper proposes an optimal control strategy based on space vector. It also verifies that the optimal control strategy based on space vector can reduce the total harmonic distortion of the grid-side current of the rectifier with a hybrid switch via circuit simulation and experimental results.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.232-233
• /
• 2012

This paper presents an effective control scheme for an electric vehicle battery charger where a symmetrical bridgeless power factor-corrected converter and a buck converter are cascaded. Both converters have been popular in industries because of their high efficiency, low cost, and compact size, hence combining these converters makes the overall battery charging system strongly efficient. Moreover, this charger topology can operate at universal input voltage and attain a desired battery current and voltage without ripple. In order to achieve a unity input power factor and zero input current harmonic distortion, the proposed control scheme adopts duty ratio feed-forward control technique in both current and voltage control loop. Additionally, in the current loop, its reference is created by a phase-locked loop (PLL) block, leading to a pure sinusoidal input current although the input voltage waveform is being distorted. The feasibility and practical value of the proposed approach are verified by simulation and experiment with an 110V/60Hz ac line input and 1.5kW-72V dc output of the battery charging system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.11
• /
• pp.2229-2235
• /
• 2009

In this paper, each specimen blended at weight proportions of 80% HDPE to 20% EVA, 70% HDPE to 30% EVA, 60% HDPE to 40% EVA, and 50% HDPE to 50% EVA was manufactured respectively. The insulation performances of the proposed insulator were compared with conventional XLPE, main insulating material of CV cable on the basis of the investigation results of DC insulation performances. From the space charge density, electric field and potential profiles with raising DC voltage and time variation in HE82, distortion of electric field distribution was improved. As EVA mixed into the bulks acts as nucleation in crystallization process of HDPE, the size of spherulites became decreased and finally formed continuous network structure. Ultimately, it resulted from extinction of space charge in the interfacial region of spherulites.

• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.6
• /
• pp.375-381
• /
• 2021

This paper investigated sound characteristics by the delamination of an acoustic window. In detail, acoustic scattering and transmission characteristics on the delaminated acoustic window were estimated using an experimental and numerical approach. The experiment results showed that acoustic wave could lose its amplitude and take phase delay when it propagates the delaminated acoustic window. The numerical results showed that scattering phenomena occur on the delamination surface. The scattering characteristics presented differently according to the delamination size in the acoustic window. It also showed that transmitted sound distortion due to delamination could cause a direction detection error of SONAR by changing the position of the main lobe and the magnitude of the side lobe. In conclusion, the delamination has to be managed during the manufacturing process of acoustic windows.

• Design & Manufacturing
• /
• v.17 no.1
• /
• pp.13-19
• /
• 2023

Blanking processing is one of the shear processing method in which the cut part becomes a product and piercing processing is a press molding process in which the cut part is discarded as a scrap. The shear angle of the punch used for blanking is determined by conditions such as the characteristics of the shear material, shear thickness and shear length. The shear angle of a punch is an important factor in determining the size of the shear load, the life of the shear punch, the deformation of the shear product and the quality of burrs In this study, blanking punches applied with four types of shear angles (i.e., 0°, 0°23", 0°46", 0°69") to the blanking punches of bracket products used in practical work were manufactured and tested. In the blanking experiment, the remaining variables except for the shear angle were the same. Experiments show that the product has the least amount of deformation in blanking punches with a shear angle equal to the material thickness, i.e., 0°46"..

• The Research Journal of the Costume Culture
• /
• v.24 no.5
• /
• pp.670-686
• /
• 2016

The purpose of this study is to delineate and analyze the expression of the kidult and its characteristics and thereby provide data to be used for fashion design in various manners as well as to suggest creative and varied possibilities of fashion design. As a way to study, the author of this paper organized the general terms, concepts and definitions concerning the kidult in the previous papers and journals. The data was collected from the collections represent the characteristics of kidult especially from 2006 to 2015. The results are as follows: Firstly, The characters stimulating the innocence of children were used the most for infantile expression. Parody used characters in the movie or famous logos. Deformation was used to create designs by way of distortion and deformation. Exaggeration thereby showing visually strong impression and inducing surprise and unexpectedness. Depaysement was useful to let us describe concepts and enhance our infinite creativity and interests about objects using surrealistic. Secondly, Infantile characteristics used the images of toys with infantile imagination and sense of humor. Fantasy introduced objects or expressed a dream-like feeling. Unexpectedness used two-faced ideas or conflicting ideas to express conflicts, collision and an interchange with heterogeneous things, avoiding the limit of size and the simplicity of materials. Parody used jocular expressions, satire and ironic expressions to express the original image in a fun manner. Exaggeration transformed changed the structure to restructure objects in a subjective and creative manner, thereby expressing creative patterns using various subject matters by way of special modeling or distortion and transformation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.139-145
• /
• 2015

This paper compare the VSCA (Variable stepsize Square Contour Algorithm) and VSDA (Variable stepsize Square contour Decision directed Algorithm) adaptive equalization algorithm that is used for the minimization of the intersymbol interference which occurs in the time dispersive channel for the transmission of 16-QAM signal.. In the SCA, it is possible to compensates the amplitude and phase in the received signal that are mixed with the intersymbol interference by the constellatin dependent constant by using the 2nd order statistics of the transmitted signal. But in the VSCA and VSDA, it is possible to the improving the equalization performance by varing the stepsize using the concept of distance adjusted approach for constellation matching. We compare the performance of the VSCA and VSDA algorithm by the computer simulation. For this, the equalizer output signal constellation, residual isi, maximum distortion and MSE were used in the performace index. As a result of computer simulation, the VSCA algorithm has better than the VSDA in every performance index.