• Proceedings of the Korea Crystallographic Association Conference
• /
• 2002.11a
• /
• pp.5-6
• /
• 2002

The new spectrometer for X-ray Induced Electron Emission Spectroscopy (XIEES) .has been recently developed in KRISS in collaboration with PTI (Russia). The spectrometer allows to perform research using the XAFS, SXAFS, XANES techniques (D.C.Koningsberger and R.Prins, 1988) as well as the number of techniques from XIEES field(L.A.Bakaleinikov et all, 1992). The experiments may be carried out with registration of transmitted through the sample x-rays (to investigate bulk samples) or/and total electron yield (TEY) from the sample surface that gives the high (down to several atomic mono-layers in soft x-ray region) near surface sensitivity. The combination of these methods together give the possibility to obtain a quantitative information on elemental composition, chemical state, atomic structure for powder samples and solids, including non-crystalline materials (the long range order is not required). The optical design of spectrometer is made according to Johannesson true focusing schematics and presented on the Fig.1. Five stepping motors are used to maintain the focusing condition during the photon energy scan (crystal angle, crystal position along rail, sample goniometer rail angle, sample goniometer position along rail and sample goniometer angle relatively of rail). All movements can be done independently and simultaneously that speeds up the setting of photon energy and allows the using of crystals with different Rowland radil. At present six curved crystals with different d-values and one flat synthetic multilayer are installed on revolver-type monochromator. This arrangement allows the wide range of x-rays from 100 eV up to 25 keV to be obtained. Another 4 stepping motors set exit slit width, sample angle, channeltron position and x-ray detector position. The differential pumping allows to unite vacuum chambers of spectrometer and x-ray generator avoiding the absorption of soft x-rays on Be foil of a window and in atmosphere. Another feature of vacuum system is separation of walls of vacuum chamber (which are deformed by the atmospheric pressure) from optical elements of spectrometer. This warrantees that the optical elements are precisely positioned. The detecting system of the spectrometer consists of two proportional counters, one scintillating detector and one channeltron detector. First proportional counter can be used as I/sub 0/-detector in transmission mode or by measuring the fluorescence from exit slit edge. The last installation can be used to measure the reference data (that is necessary in XANES measurements), in this case the reference sample is installed on slit knife edge. The second proportional counter measures the intensity of x-rays transmitted through the sample. The scintillating detector is used in the same way but on the air for the hard x-rays and for alignment purposes. Total electron yield from the sample is measured by channeltron. The spectrometer is fully controlled by special software that gives the high flexibility and reliability in carrying out of the experiments. Fig.2 and fig.3 present the typical XAFS spectra measured with spectrometer.

• The Journal of the Korea Contents Association
• /
• v.20 no.1
• /
• pp.617-629
• /
• 2020

In the historical and cultural blocks with the most concentrated urban cultural heritage, the development of both side streets is impacted by the development of the main street, which shows a gradual decline. The loss of placeness on both side streets has resulted in more empty houses. Therefore, it is urgent to pay attention and take countermeasures to the empty houses in historical and cultural blocks. In this study, the vacant houses on Zhongshan Road in Hangzhou, China were taken as the object of study to understand the location theory and the six dimensions of Matthew Carmona's urban design. Meanwhile, it further analyzed the evaluative features of the placeness of the vacant houses in the historical and cultural street, to provide direction and basis for the flexible using of other empty houses in Zhongshan Road. Then by applying the Analytic Hierarchy Process (AHP), it obtained the importance scale of each evaluative feature and compared the evaluation results of experts with the analysis results of cases, getting the results as follows: In the flexible application of vacant houses in historical and cultural street, the evaluation result of placeness indicates that this kind of usage should be in order of societal level, perceptional level, functional level, morphological level, visual hierarchy and temporal level; among the evaluative features, security, identity, usability, individuality, aesthetics, connection, diversity, openness, continuity, accessibility, order and history should be considered in turn.

• Journal of Information Management
• /
• v.34 no.4
• /
• pp.63-84
• /
• 2003

This research is a case study that describes the NUCLIS21(Nuclear Information System 21), an integrated web-based information management system of KAERI(Korea Atomic Energy Research Institute), implemented to carry out the role of a national nuclear information center with government support as an information infra implementation programme. Through its user-centered single interface, the system aims at building an infrastructure for the national nuclear information center, as well as improving the information management system of the TID(Technical Information Department) within the institute. The system consists of two major parts which are an integrated module of the MIS and six different kinds of system. These include the Integral search system with OPAC, My Library, the Acquisition system, the Catalogue system, the Information Supply system, and the Serial Publication system. The DB is composed of Bibliographical DB, Original text DB and Abstract DB. A special feature of this system was designed as a unified network system through connection to MIS(Management Integration System) of the institute, so users can get research information for projects. Therefore, they have access to available information easily and access to the ongoing service of this system. Furthermore, users can share information by using our system. The survey has it that 75.7%(200 persons), 62.1%(164 persons) and 78.4%(207 persons) of the respondents are satisfied with the fidelity, speediness, and convenience of the system respectively, and the overall satisfaction of the respondents is comparably high.

• Journal of the Korean Dietetic Association
• /
• v.10 no.2
• /
• pp.159-173
• /
• 2004

The desire for the healthy life is increasing as a result of rapidly changing social and economic environment in Korea. Because of the need, informations on health, food and nutrition are being introduced through the mass media. The object of this study is to investigate and analyze the quantity and quality of informations about health, food and nutrition in women's magazines. Six representative domestic monthly magazines(Lady Kyunghyang, Women Donga, Women Chosun, Women JoongAng, Women sense, Jubu Senghwal) were selected for this study. The results of monitoring from June 2002 to September 2002 for the women's magazines were summarized as follows; 1. The percentage of the articles on health, food and nutrition by total area of the women's magazines was 23.1%. There were total 595 articles on health, food and nutrition. Among these, 400 articles(67.2%) were about food and nutrition. 2. The percentage of the advertisements on health, food and nutrition was 35.3% by total area of the woman's magazines. There were 2,353 advertisements on health, food and nutrition. Among these, 1,574(66.9%) advertisements were about food and nutrition. The most frequently advertised advertisements on food and nutrition were about processed foods (527 cases, 33.5%). The second most frequently advertised advertisements were about diet (374 cases, 23.8%). The third one was healthy foods (345 cases, 21.9%). 3. The contents of 215(53.8%) articles (the total number of articles was 400) was suitable. The contents of 89 advertisements(22.3%) did not have accurate informations on health, food and nutrition. For the advertisements in women's magazines (the number of total articles was 2,203), the percentage of the advertisements which was not able to capture the feature of the advertisements was 27.9%, insufficiency of reliable sources was to 21.9%, and exaggeration of the contents in the ads was 16.0%. Articles and advertisements should be backed by scientific research or reliable sources and also the opinions of people with expertise in order to report accurate informations to the general public. In order to achieve these results, there should be continuing monitoring activity for the women's magazines.

• The KIPS Transactions:PartB
• /
• v.15B no.1
• /
• pp.25-36
• /
• 2008

In this paper, we present a robust hand recognition approach to sudden illumination changes. The proposed approach constructs a background model with respect to hue and hue gradient in HSI color space and extracts a foreground hand region from an input image using the background subtraction method. Eighteen features are defined for a hand pose and multi-class SVM(Support Vector Machine) approach is applied to learn and classify hand poses based on eighteen features. The proposed approach robustly extracts the contour of a hand with variations in illumination by applying the hue gradient into the background subtraction. A hand pose is defined by two Eigen values which are normalized by the size of OBB(Object-Oriented Bounding Box), and sixteen feature values which represent the number of hand contour points included in each subrange of OBB. We compared the RGB-based background subtraction, hue-based background subtraction and the proposed approach with sudden illumination changes and proved the robustness of the proposed approach. In the experiment, we built a hand pose training model from 2,700 sample hand images of six subjects which represent nine numerical numbers from one to nine. Our implementation result shows 92.6% of successful recognition rate for 1,620 hand images with various lighting condition using the training model.

• 한국해양학회지
• /
• v.22 no.2
• /
• pp.105-118
• /
• 1987

A series of anchor stations were occupied along the Keum EAstuary during six different periods of tidal and fluvial regimes. The results clearly show that the formation and evolution of the turbidity maximum play an important role in the sedimentary processes in this environment. The turbidity maximum in the Keum Estuary is primarily related to the tidal range at the mouth and is caused by the resuspension of bottom sediments. In this estuary, the turbidity maximum is not a permanent feature and shows semidiurnal, fortnightly and seasonal variations. Repetition of deposition and resuspension of fine sediments occur in response to the variation in current velocity associated with semidiurnal tidal cycles. The core of turbidity maximum shifts landward or seaward accordion to the flood-ebb succession. The turbidity maximum also shows a fortnightly variation in response to the spring-neap cycles. Thus, the turbidity maximum degenerates during neap-tide and regenerates during spring-tide. The freshwater discharge is also an important factor in the formation and destruction of the turbidity maximum. The increase in freshwater discharge in rainy season can create an ebb-dominant current pattern which enhances the seaward transport of suspended sediments, resulting in the shortening of residence time of suspended materials in the estuary. Thus, under this high discharge condition, the turbidity maximum exists only during spring-tide and starts to disappear as the tidal amplitude decreases.

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 1998.11a
• /
• pp.0-0
• /
• 1998

-Part I- As market needs become more various, the production of smaller quantities of a wider variety of products becomes increasingly important. In addition, in order to meet demands for more efficient production, long-term unmanned factory operation is prevailing at a remarkable pace. Within this context, laser machines are gaining increasing popularity for use in applications such as cutting and welding metallic and ceramic materials. FANUC supplies four models of $CO_2$ laser oscillators with laser power ranging from 1.5㎾ to 6㎾ on an OEM basis to machine tool builders. However, FANUC has been requested to produce laser oscillators that allow more compact and lower-cost laser machines to be built. To meet such demands, FANUC has developed six models of Slab type YAG laser oscillators with output power ranging from 150W to 2㎾. These oscillators are designed mainly fur cutting and welding sheet metals. The oscillator has an exceptionally superior laser beam quality compared to conventional YAG laser oscillators, thus providing significantly improved machining capability. In addition, the laser beam of the oscillator can be efficiently transmitted through quartz optical fibers, enabling laser machines to be simplified and made more compact. This paper introduces the features of FANUC’s developed Slab type YAG laser oscillators and their applications. - Part II - All-solid-state lasers employing laser diodes (LD) as a source of pumping solid-state laser feature high efficiency, compactness, and high reliability. Thus, they are expected to provide a new generation of processing tools in various fields, especially in automobile and aircraft industries where great hopes are being placed on laser welding technology for steel plates and aluminum materials for which a significant growth in demand is expected. Also, in power plants, it is hoped that reliability and safety will be improved by using the laser welding technology. As in the above, the advent of high-power all-solid-state lasers may not only bring a great technological innovation to existing industry, but also create new industry. This is the background for this project, which has set its sights on the development of high-power, all-solid-state lasers with an average output of over 10㎾, an oscillation efficiency of over 20%, and a laser head volume of below 0.05㎥. FANUC Ltd. is responsible for the research and development of slab type lasers, and TOSHIBA Corp. far rod type lasers. By pumping slab type Nd: YAG crystal and by using quasi-continuous wave (QCW) type LD stacks, FANUC has already obtained an average output power of 1.7㎾, an optical conversion efficiency of 42%, and an electro-optical conversion efficiency of 16%. These conversion efficiencies are the best results the world has ever seen in the field of high-power all-solid-state lasers. TOSHIBA Corp. has also obtained an output power of 1.2㎾, an optical conversion efficiency of 30％, and an electro-optical conversion efficiency of 12%, by pumping the rod type Nd: YAG crystal by continuous wave (CW) type LD stacks. The laser power achieved by TOSHIBA Corp. is also a new world record in the field of rod type all-solid-state lasers. This report provides details of the above results and some information on future development plans.

• Journal of the Korean Society of Radiology
• /
• v.15 no.4
• /
• pp.473-479
• /
• 2021

The diagnostic criteria for diffuse thyroid disease are ambiguous and there are many errors due to the subjective diagnosis of experts. Also, studies on ultrasound imaging of thyroid nodules have been actively conducted, but studies on diffuse thyroid disease are insufficient. In this study, features were extracted by applying the GLCM algorithm to ultrasound images of normal and diffuse thyroid disease, and quantitative analysis was performed using the extracted feature values. Using the GLCM algorithm for thyroid ultrasound images of patients diagnosed at W hospital, 199 normal cases, 132 mild cases, and 99 moderate cases, a region of interest (50×50 pixel) was set for a total of 430 images, and Autocorrelation, Sum of squares, sum average, sum variance, cluster prominence, and energy were analyzed using six parameters. As a result, in autocorrelation, sum of squares, sum average, and sum variance four parameters, Normal, Mild, and Moderate were distinguished with a high recognition rate of over 90%. This study is valuable as a criterion for classifying the severity of diffuse thyroid disease in ultrasound images using the GLCM algorithm. By applying these parameters, it is expected that errors due to visual reading can be reduced in the diagnosis of thyroid disease and can be utilized as a secondary means of diagnosing diffuse thyroid disease.

• Investigative Magnetic Resonance Imaging
• /
• v.25 no.4
• /
• pp.313-322
• /
• 2021

Purpose: To find diagnostic image features, to compare diagnostic performance of multiphase CT versus gadoxetic acid disodium-enhanced MRI (GAD-MRI), and to evaluate the impact of analyzing Liver Imaging Reporting and Data System (LI-RADS) imaging features, for distinguishing combined hepatocellular-cholangiocarcinoma (CHC) from hepatocellular carcinoma (HCC). Materials and Methods: Ninety-six patients with pathologically proven CHC (n = 48) or HCC (n = 48), diagnosed June 2008 to May 2018 were retrospectively analyzed in random order by three radiologists with different experience levels. In the first analysis, the readers independently determined the probability of CHC based on their own knowledge and experiences. In the second analysis, they evaluated imaging features defined in LI-RADS 2018. Area under the curve (AUC) values for CHC diagnosis were compared between CT and MRI, and between the first and second analyses. Interobserver agreement was assessed using Cohen's weighted κ values. Results: Targetoid LR-M image features showed better specificities and positive predictive values (PPV) than the others. Among them, rim arterial phase hyperenhancement had the highest specificity and PPV. Average sensitivity, specificity, and AUC values were higher for MRI than for CT in both the first (P = 0.008, 0.005, 0.002, respectively) and second (P = 0.017, 0.026, 0.036) analyses. Interobserver agreements were higher for MRI in both analyses (κ = 0.307 for CT, κ = 0.332 for MRI in the first analysis; κ = 0.467 for CT, κ = 0.531 for MRI in the second analysis), with greater agreement in the second analysis for both CT (P = 0.001) and MRI (P < 0.001). Conclusion: Rim arterial phase hyperenhancement on GAD-MRI can be a good indicator suggesting CHC more than HCC. GAD-MRI may provide greater accuracy than CT for distinguishing CHC from HCC. Interobserver agreement can be improved for both CT and MRI by analyzing LI-RADS imaging features.

• Korean Journal of Poultry Science
• /
• v.48 no.4
• /
• pp.327-335
• /
• 2021

Riemerella anatipestifer (RA) can cause septicemia, polyserositis, and ataxia in ducks. It can also colonize the upper respiratory tract of healthy ducks. These differences in pathogenicity are probably the result of diverse mechanisms of virulence in different strains. Since serum resistance is a feature frequently found in systemic pathogens, 130 RA strains having different clinical origins were tested. A variety of serum susceptibility levels were detected. Pharynx strains from healthy ducks were mainly susceptible to the bactericidal effect of the serum, while systemic strains were serum resistant. Heat-treatment of the sera abolished the bactericidal activity, indicating that complement is a key factor in this effect. In an attempt to associate serum-resistance to surface determinant genes of the bacteria, we screened for six genes involved in lipopolysaccharide synthesis and membrane proteins in RA. Of these, three genes (AS87_09335, AS87_00480, and AS87_05195) encoding outer membrane proteins might be implicated in serum resistance statistically. The results indicate that serum resistance is a virulence mechanism in RA.