• Archives of Reconstructive Microsurgery
• /
• 제9권1호
• /
• pp.80-87
• /
• 2000

Acute high speed accidents that results in full thickness skin defect and exposure of tendon, nerve, vessel and periosteum over denuded bone demands soft tissue coverage. Exposed bone often ensues chronic infection and requires free flap transplantation which surely covers defects in one stage operation and enhances transport of oxygen-rich blood and converts a non-osteogenic or partially osteogenic site into a highly osteogenic site, but exposed bone which had performed free flap transplantation sometimes necroses and needs secondary bone procedure. Scar contracture limits joint motion should be excised and covered with normal soft tissue to restore normal range of motion. Authors have performed the large latissimus dorsi myocutaneous free flap in 8 cases of extensive soft tissue defect and exposed bone lesion in the leg and 1 case of the flap was failed. The secondary ilizarov bone procedure was performed in 3 of 8 cases. 2 cases of large burn scar contracture and 1 case of posttraumatic scar contracture in lower extremity were restored with the large latissimus dorsi myocutaneous free flap. Authors concluded that large latissimus dorsi myocutaneous free flap is the most acceptable microvascular procedure in large soft tissue defect combined with exposed periosteum and bone requiring secondary bone procedure and in large burn scar contracture limiting knee joint motion.

• 한국안전학회지
• /
• 제24권2호
• /
• pp.48-54
• /
• 2009

Structures to support against slop failures or resist earth pressure like masonry retaining walls or retaining walls have continued to advance and evolve to new eco-friendly, easy-to-construct, crib retaining walls with varied forms and construction methods, meeting the needs of the times. Researches until now, however, have focused on the analyses of site displacement or stability of the whole site including structures like retaining walls, and thus, researches on rational design or method for stability analysis are lacking. Therefore, this study was conducted on a number of stability analyses, such as the visual power line or stability on sliding, being presented for bin walls, which enable vegetation to grow and were developed and applied in varied forms, meeting the development demands for eco-friendly retaining wall structures. This study compared the results of stability analyses, determined their feasibility, and evaluated their stability according to the height and facade slope of retaining walls. According to the results of this study, traditional masonry retaining wall analysis showed rather conservative stability evaluation results in the stability evaluation of bin walls, and the method using the visual power line seems to be objective because it produced similar results to the stability evaluation method on sliding or turnover.

• 대한조선학회논문집
• /
• 제53권1호
• /
• pp.69-75
• /
• 2016

Fabrication of the hull plate demands a lot of man-hour and a high degree of technology. In recent years, commercial shipping orders have been fallen because of intensifying competition with low price of order and labor cost. In order to solve this problem, a countermeasure such as a cost reduction is required. In this study, we are dealing with the method of supplying the forming information of the hull to the production site. We reviewed studies of hull forming that have been proposed so far to develop a method for providing hull forming information. On the basis of given production plans from the production site of shipyard, we discuss how to convert shell plate to production plan. Then, we will discuss the efficiency of the distribution method through the network about the method of hull forming. Thus, we have modified the distribution method which was proposed before. Finally, we will introduce the enhanced method for providing fabrication information of the hull plate to the small and medium-sized shipyards.

• 한국조경학회지
• /
• 제26권4호
• /
• pp.135-143
• /
• 1999

This study is about the pattern of spatial structures of major university campuses in Korea. The pattern is composed of buildings, circulation, and open space within the campus. It is physical structural system which makes campus more educational environment as well as new academic landscape. The pattern is checked on the basis of existing sub-patterns of eleven universities with base data by using computer program, Autocad and Landcadd. The result is that most of campus spatial structures consists of simple and unified grid pattern. Basic educational facilities are at the center of the whole structure as well. Some universities are located in suburb and have large site which makes it more open space oriented pattern, more various exterior space and more specific circulation system. So the campus patterns of recently built is more diverse and has more design components. In most cases, campus does not have strong spatial coherence among its buildings, circulation, and open space. It is important to develop Korean formal campus spatial structure which is intrinsic to its site and is proper to its academic plan. Campus spatial structure should be formulated to embrace diverse demands of university and to accumulate unique university landscape.

• Industrial Engineering and Management Systems
• /
• 제9권3호
• /
• pp.227-241
• /
• 2010

A memory module industry's supply chain usually consists of multiple manufacturing sites and multiple distribution centers. In order to fulfill the variety of demands from downstream customers, production planners need not only to decide the order allocation among multiple manufacturing sites but also to consider memory module industrial characteristics and supply chain constraints, such as multiple material substitution relationships, capacity, and transportation lead time, fluctuation of component purchasing prices and available supply quantities of critical materials (e.g., DRAM, chip), based on human experience. In this research, a directed graph-based supply network planning (DGSNP) model is developed for memory module industry. In addition to multi-site order allocation, the DGSNP model explicitly considers production planning for each manufacturing site, and purchasing planning from each supplier. First, the research formulates the supply network's structure and constraints in a directed-graph form. Then, a proposed genetic algorithm (GA) solves the matrix form which is transformed from the directed-graph model. Finally, the final matrix, with a calculated maximum profit, can be transformed back to a directed-graph based supply network plan as a reference for planners. The results of the illustrative experiments show that the DGSNP model, compared to current memory module industry practices, determines a convincing supply network planning solution, as measured by total profit.

• 한국조경학회지
• /
• 제22권1호
• /
• pp.179-198
• /
• 1994

Urban parks and open spaces provide the community residents with the most easily accessible source for outdoor recreation, contributing also to the improvement of quality of natural environment in urban area. The demands of urban residents' for more and better green area are ever-increasing. However, the level of most urban open spaces which are easily accessible for residents are not satisfactory to meet the residents' demand in availability and in quality as well. Most existing urban open spaces are simply built of green areas only or have been developed in almost identical design with little consideration for individual uniqueness of the site. When developing neighbourhood parks in urban housing complexes, for example, little consideration is being given to topographical conditions, interrelation with the adjacent green area, or viability of the urban ecosystem. In many cases, urban park development projects are being done with serious negligence of natural properties of the site, by even destroying existing healthy woodlands. for instance. The objectives of this study are; -To survey on the domestic and the overseas cases of regulatory systems, development status and planning methods for urban open space. -To identify underlying issues of residental park developments in urban housing projects and establish appropriate improvement measures thereof, by studing and analyzing current-use data of developed urban parks and management status thereof. -To establish improved standards for urban open space planning, by integrating above surveys and studies, and recommendation for revision of related legislation is also presented to implement these standards.

• 대한두경부종양학회지
• /
• 제35권1호
• /
• pp.1-11
• /
• 2019

In head and neck reconstruction, microsurgeons are faced with various demands, such as thin resurfacing, or three-dimensional reconstruction, and therefore, conventional flap as well as perforator flaps are all useful for the functional and aesthetic reconstruction successfully. Among perforator flaps, the pros and cons of anterolateral thigh perforator flap(ALTp) and thoracodorsal perforator flap(TAp) is compared and selected depending on the surgeon's preference, recipient site condition or patient status. Both flaps can be elevated in a chimeric pattern by combining different aspects of tissue components. Customized or tailored reconstruction as well as 3 dimensional reconstructions are all available with perforator flaps and it is useful in head and neck reconstruction. The most outstanding update in head and neck reconstruction is the perforator based island flap (PBIF) compared to conventional flaps. The conventional local flap has evolved on behalf of the perforator concept and its design becomes more flexible and freestyle with less limitations. Actually, random pattern flap is now a misnomer and most conventional local flaps turn into PBIFs. Finally we can say all conventional donor site becomes universal, depending on the surgeons' preference or idea. Moreover, there is no more "flap of choice" and postoperative results are quite variable by surgeons' ability. Operative procedures and plans are very flexible to freestyle flap. With all these advantages, surgeons should be armed with both conventional and perforator concepts for solving any defects or problems.

• 농업과학연구
• /
• 제50권4호
• /
• pp.953-966
• /
• 2023

As the importance of renewable energy diffusion spreads, promotion of sustainable renewable energy projects such as agrivoltaics is expected to accelerate. Furthermore, to promote agrivoltaics projects, it must be considered the legislation related to agrivoltaics and Chungnam Province's local policy. This research focuses on the selection of the most suitable sites for agrivoltaics installations in Chungnam Province in South Korea. Therefore, the process of this research was as follows. First, the legislation related to agrivoltaics and local policy in Chungnam Province were identified. Second, it employs an analytic hierarchy process (AHP) to consider important criteria and their weights for site selection. Third, based on the weights calculated AHP, geographic information system (GIS) was performed to select most suitable location selection of agrivoltaics installations in Chungnam Province. The analysis identified approximately 60 promising most suitable location for agrivoltaics installations in Chungnam Province, primarily in the northern part of Chungnam Province. These areas are expected to meet electricity demands in nearby regions since these are relatively adjacent to Gyeonggi Province. According to the results of research, policy suggestions related to agrivoltaics were presented separately into the agricultural sector and the electricity power sector. The study's results serve as a valuable resource for future national-level candidate site selection for agrivoltaics projects.

• Geomechanics and Engineering
• /
• 제37권3호
• /
• pp.279-291
• /
• 2024

The "Korea Institute of Geoscience and Mineral (KIGAM) Quake" is a web-based open platform developed for publicly serving seismological data from 61 stations operated by KIGAM in Korea. The service provides meta-information related to observatory sites, sensors, and recorders necessary for utilizing the seismological data, as well as mainly observed continuous and strong-motion waveforms. The data is available through both the web and International Federation of Digital Seismograph Networks (FDSN) web services (open API), a unified data-providing interface in seismology. The platform aims to strengthen its open nature by offering a signal processing function for strong ground motions that can be controlled by user requests. The processed results can be downloaded in ASCII format, designed to meet the increased demands and accessibility in the earthquake engineering field. The platform also offers earthquake research information produced by KIGAM, such as recent major earthquake source information and academic annual report of earthquakes. Additionally, a site flat file was constructed for the geotechnical characteristics of 61 KIGAM station (KGNET) sites based on direct investigations and estimations.

• 한국건설관리학회논문집
• /
• 제25권3호
• /
• pp.17-26
• /
• 2024

엑셀 기반의 서류 작성, 결재, 품질 시험을 수행하는 건설현장의 품질관리업무는 많은 시간과 노력이 소요된다. 엑셀 기반의 업무는 품질시험성적서 양식 인쇄, 품질시험 수행, 시험성적서 작성 및 결재, 관리대장 작성으로 구성된다. 이렇듯 분리된 품질관리 프로세스는 업무 소요시간과 효율성을 저하시킨다. 따라서, 품질관리업무의 생산성을 향상시키기 위해 클라우드 기반의 건설현장 품질관리 시스템이 개발되었다. 본 연구의 목적은 건설현장 도입 초기 단계인 품질관리시스템의 생산성을 분석하는 것이다. 본 연구는 건설현장 품질관리시스템을 도로 건설현장에 도입하고, 도입 전·후의 품질관리업무 프로세스 변화를 면밀히 분석했다. 또한 품질관리자들에게 설문조사를 실시하여 품질관리시스템 도입 전·후의 업무 시간 데이터를 수집했다. 수집한 데이터에 몬테카를로 시뮬레이션 방법론을 적용하여 건설현장 품질관리시스템의 생산성 향상 효과를 분석하고 결과를 제시하였다. 본 연구의 결과는 품질관리 업무 자동화를 위한 후속 연구들의 기초자료로 활용할 수 있을 것이다.