• 대한안전경영과학회지
• /
• 제16권2호
• /
• pp.53-61
• /
• 2014

The disaster and safety accidents in any construction site occur inevitably. Since the on-site disaster and accident occurrence became one of major concerning factors in construction site, architects & building executers have been flooded with safety management advices. The purpose of this paper is to survey and analyze the effect of the application of Safety Patrol Management System(SPMS) upon the reduction of disaster & accident occurrences in construction site. In order to estimate and reduce the disaster and accident ratio in construction site, various surveyed data has been analysed. It will establish the suitable design standards and suggest the basic database for estimating disaster and accident ratio.

• 한국산업융합학회 논문집
• /
• 제22권2호
• /
• pp.183-189
• /
• 2019

Researches utilizing the fourth industrial revolution technology are being conducted as a breakthrough for improving the earthworker productivity. In order to make the earthwork site smarter, it is necessary to digitize the construction site topography at first. For this purpose, photogrammetry using drones and LiDAR on MMS have been recently used. The purpose of this study is to analyze the accuracy of LiDAR by installation angles for verifying the application of MMS in the construction site. As a result of comparing the coordinates measured by the total station and the LiDAR, a small error of about 1-2 centimeters was shown. It is confirmed that MMS could be well applied to the earthwork site. In addition, there was no significant difference in the accuracy of the acquired coordinates according to the installation angle of the LiDAR, but the shape of the point clouds was different. The larger the installation angle, the better the shape of the site terrain is measured.

• 한국환경보건학회지
• /
• 제27권1호
• /
• pp.51-55
• /
• 2001

The pollution characteristics of water quality analysis and the heavy metal analysis of river sediment in the Western Nakdong river, and then a commercial tile using the polluted sediment was produced. The analytical results of the riverbed structure and the depth distribution in the Western Nakdong river were that Macdo Stream(site 2) was the deepest(13 ft). The analytical result of water quality showed that BOD was the highest in the Hogei Stream(site 6); COD, Syanduengchi Island(site 1);SS, Macdo Stream(site 2);T-N, Suanduengchi Island(site 1);T-P, Macdo Stream(site 2). Therefore the deeper the site was the higher the pollution concentration was. The result of heavy metal analysis of the river sediment was that Pb and Cr were the highest in Kangdong Bridge(site 9); Cd, Macdo Stream(site 2), so the deeper the site was the higher the pollution concentration was. The production of tile using the mixure of the polluted sediment and the raw material was successful, so the reuse of polluted sediment was possible.

• 콘크리트학회논문집
• /
• 제27권4호
• /
• pp.419-426
• /
• 2015

본 연구는 지하식 LNG 저장탱크의 시공에 앞서 연약지반의 개량을 위하여 현장 원위치의 흙과 시멘트, 벤토나이트 등을 사용하는 소일-시멘트 연속벽체를 효과적으로 시공하는 SMW 공법에 대한 배합설계 및 현장적용 사례를 실험적으로 규명하기 위한 것이다. 현장조건을 고려하여, 보통 포틀랜드 시멘트와 벤토나이트를 주재료로 선정하였고, 흙의 단위용적중량은 $1,833kg/m^3$을 적용하였으며, 이에 따른 물-시멘트비 4종류와 배합속도 3수준을 대상으로 블리딩 및 압축강도 실험을 실시하였다. 실험은 실내실험 및 현장적용 사례로 나누어 수행되었으며, 실험을 통하여 얻은 결론은 다음과 같다. (1) 물-시멘트비가 감소할수록, 배합속도(rpm)이 증가할수록, 블리딩량 및 블리딩율이 감소하는 것으로 나타났다. (2) 물-시멘트비 150% 이하에서 현장적용강도(1.5 MPa)를 만족하였으며, 현장 코아강도는 공시체 강도에 비해 8~23% 증가하였다. 따라서 적용현장 조건을 고려하여 단위시멘트량 $280kg/m^3$, 벤토나이트 $10kg/m^3$, 물-시멘트비 150%, 그리고 배합속도 90 rpm을 현장시공의 최적배합으로 제안하였으며, 현장적용 사례의 실험결과로부터 요구되는 성능을 만족하였다.

• 대한원격탐사학회지
• /
• 제33권6_2호
• /
• pp.1061-1073
• /
• 2017

본 연구는 4차 산업의 핵심기술인 인공지능과 환경공간정보의 융합을 통한 정보생산 및 활용가능성을 제시하고자 대표적인 딥러닝(deep-learning) 기법인 CNN(Convolutional Neural Network)을 이용한 영상분류를 수행하였다. CNN은 학습을 통해 스스로 분류기준에 따른 커널의 속성을 결정하며, 최적의 특징영상(feature map)을 추출하여 화소를 분류한다. 본 연구에서는 CNN network를 구성하여 기존의 영상처리 기법으로 해결이 어려웠던 분광특성이 유사한 물질간의 분류 및 GIS속성정보에 따른 분류를 수행하였으며, 항공초분광센서인 CASI(Compact Airborne Spectrographic imager)와 AISA(Airborne Imaging Spectrometer for Application)로 취득된 영상을 이용하였다. 실험대상지역은 총 3곳이며, Site 1과 Site 2는 감자, 양파, 벼 등의 다양한 농작물을 포함하며, Site 3는 단독주거시설, 공동주거시설 등 세분류 토지피복도의 분류 항목으로 구성된 건물을 포함한다. 실험결과, 분류 정확도 96%, 99%로 농작물을 종류에 따라분류하였으며, 96%의 정확도로 건물을 용도에 따라 분류하였다. 본 연구의 결과를 환경공간정보 서비스에 활용하기 위하여 계절별 농작물의 종류를 제공할 수 있는 환경주제도를 제안하였으며, 기존의 토지피복도와 최신 GIS자료를 이용한 세분류 토피지복도 제작 및 갱신 가능성을 확인하였다.

• Journal of Biosystems Engineering
• /
• 제35권2호
• /
• pp.132-137
• /
• 2010

Site-specific N application for corn is one of the precision crop management. To implement the site-specific N application, various nitrogen stress sensing methods, including aerial image, tissue analysis, soil sampling analysis, and SPAD meter readings, have been used. Use of side-dressing, an efficient nitrogen application method than a uniform application in either late fall or early spring, relies mainly on the capability of nitrogen deficiency detection. This paper presents map-based variable rate nitrogen application based using a multi-spectral corn nitrogen deficiency(CND) sensor. This sensor assess the nitrogen stress by means of the estimated SPAD reading calculated from the corn leave reflectance. The estimated SPAD value from the CND sensor system and location information form DGPS of each field block was combined into the field map using a ArcView program. Then this map was converted into a raster file for a map-based variable rate application software. The relative SPAD (RSPAD = SPAD over reference SPAD) was investigated 2 weeks after the treatments. The results showed that the map-based variable rate application system was feasible.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.40-43
• /
• 2003

This study was performed to verify the effect of workability in construction site using by high strength concrete with granulated blast furnace slag. For the satisfaction of the target strength, the optimized mixing ratio was drawn from the replacement ratio of granulated blast furnace slag and fly-ash. Results from the experiment and the application showed the outstanding quality of concrete and the effects of cost-down.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2010년 춘계학술발표회 논문집
• /
• pp.321-323
• /
• 2010

본 연구는 위치인식기술의 적용을 위해 요구사항을 분석하고, 분석된 결과에 따라 기술의 특성에 적합한 단지 현장 도출을 목적으로 수행되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1891-1893
• /
• 2000

In this paper, we studied the diagnostic technique to analyze the deterioration of cast resin transformer using partial discharge detection for on-site application.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 춘계학술논문 발표대회
• /
• pp.97-100
• /
• 2007

Recently, A demand on productivity improvement has required innovation of construction industry more than fast with a economy condition. A RFID is technology that can be effectively applied at the administration of physical distribution, labor, construction progress, etc at construction industry. Therefore, At this paper, A survey of staffs that work at construction site is practised to study application possibility of RFID technology at construction industry. It shows use possibility through a survey that investigated Recognition and application, etc at construction site. RFID technology is connected with other technologies by being based on this study construction industry will be advanced.