• Journal of Environmental Policy
• /
• v.12 no.4
• /
• pp.71-92
• /
• 2013

Unlike general public investment projects, when it comes to environmental public investment projects, there is a gap between those who pay the costs, and those who receive the benefits. This is because of the long term nature of environmental investments, which entails that the majority of the costs are paid by the current generation, while the benefits are reaped by future generations. Because of this, when the social discount rate is set at a standard, singular rate, an issue of relative underestimation of the benefits reaped by future generations may occur during the analytic process. This paper begins with the recognition of this problem, and attempts to estimate a suitable social discount rate that can be applied to environmental investment projects. Taking into account recent economic situations, the social discount rate is currently being estimated at between 2.9 ~ 4.9%. Also, this paper used preliminary feasibility studies that took place so far, to analyze the standard pattern of benefit generation. This revealed that alterations in social discount rates can bring significant changes in economic feasibility test results. Simulation results showed that roughly 6% of B/C ratios could be increased by 1%p. resulting in a decrease in social discount rates. Also if we use hyperbolic discount rates, instead of using the current singular rate, there would be a meaningful increase in the benefits for the future generation.

• Journal of Internet Computing and Services
• /
• v.25 no.1
• /
• pp.109-121
• /
• 2024

In various manufacturing processes such as textiles and automobiles, when equipment breaks down or stops, the machines do not work, which leads to time and financial losses for the company. Therefore, it is important to detect equipment abnormalities in advance so that equipment failures can be predicted and repaired before they occur. Most equipment failures are caused by bearing failures, which are essential parts of equipment, and detection bearing anomaly is the essence of PHM(Prognostics and Health Management) research. In this paper, we propose a preprocessing algorithm called SWT-SVD, which analyzes vibration signals from bearings and apply it to an anomaly transformer, one of the time series anomaly detection model networks, to implement bearing anomaly detection model. Vibration signals from the bearing manufacturing process contain noise due to the real-time generation of sensor values. To reduce noise in vibration signals, we use the Stationary Wavelet Transform to extract frequency components and perform preprocessing to extract meaningful features through the Singular Value Decomposition algorithm. For experimental validation of the proposed SWT-SVD preprocessing method in the bearing anomaly detection model, we utilize the PHM-2012-Challenge dataset provided by the IEEE PHM Conference. The experimental results demonstrate significant performance with an accuracy of 0.98 and an F1-Score of 0.97. Additionally, to substantiate performance improvement, we conduct a comparative analysis with previous studies, confirming that the proposed preprocessing method outperforms previous preprocessing methods in terms of performance.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.4
• /
• pp.729-740
• /
• 1994

In the shape optimal design based on h-version of FEM, the ideal mesh for the initial geometry most probably will not be suitable for the final analysis. Thus, it is necessary to remesh the geometry of the model at each stage of optimization. However, the p-version of FEM appears to be a very attractive alternative for use in shape optimization. The main advantages are as follows; firstly, the elements are not sensitive to distortion for interpolation polynomials of order $p{\geq}3$; secondly, even singular problems can be solved more efficiently with p-version than with the h-version by proper mesh design; thirdly, the initial mesh design are identical. The 2-D p-version model for shape optimization is presented on the basis of Bezier's curve fitting, gradient projection method, and integrals of Legendre polynomials. The numerical results are performed by p-version software RASNA.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.515-527
• /
• 2009

IEEE 802.11n is an ongoing next-generation WLAN(Wireless Local Area Network) standard that supports a very high-speed connection with more than 100Mb/s data throughput measured at the MAC(Medium Access Control) layer. Study trends of IEEE 802.11n show two aspects, enhanced data throughput using aggregation among packets in MAC layer, and better data rates adapting MIMO(Multiple-Input Multiple-Output) in PHY(Physical) layer. But, the former doesn't consider wireless channel and the latter doesn't consider aggregation among packets for reality. Therefore, this paper analyzes data throughput for IEEE 802.11n considering MAC and PHY connection. A-MPDU(Aggregation-MAC Protocol Data Unit) and A-MSDU(Aggregation-MAC Service Unit) is adapted considering multi-service in MAC layer, WLAN MIMO TGn channel using SVD(Singular Value Decomposition) is adapted considering MIMO and wireless channel in PHY layer. Consequently, Simulation results shows throughput between A-MPDU and A-MSDU. Also, We use Ns-2(Network simulator-2) for reality.

• Journal of Mechanical Science and Technology
• /
• v.20 no.12
• /
• pp.2052-2060
• /
• 2006

The wear of engine valve and seat insert is one of the most important factors which affect engine performance. Because of higher demands on performance and the increasing use of alternative fuel, engine valve and seat insert are challenged with greater wear problems than in the past. In order to solve the above problems, a simulator was developed to be able to generate and control high temperatures and various speeds during motion. The wear simulator is considered to be a valid simulation of the engine valve and seat insert wear process with various speeds during engine activity. This work focuses on the different degrees of wear at three different singular test speeds (10 Hz, 25 Hz & multi-Hz). For this study, the temperature of the outer surface of the seat insert was controlled at 350$^{\circ}C$, and the test load was 1960 N. The test cycle number was $6.0{\times}10^6$. The mean ($\pm$standard error) wear depth of the valve at 10 Hz and 25 Hz was 45.1 ($\pm$3.7)$\mu$m and 81.7 ($\pm$2.5)$\mu$m, respectively. The mean wear depth of the seat insert at 10 Hz and 25 Hz was 52.7 ($\pm$3.9)$\mu$m and 91.2 ($\pm$2.7)$\mu$m, respectively. In the case of multi-Hz it was 70.7 ($\pm$2.4)$\mu$m and 77.4 ($\pm$3.8)$\mu$m, respectively. It was found that higher speed (25 Hz) cause a greater degree of wear than lower speed (10 Hz) under identical test condition (temperature, valve displacement, cycle number and test load). In the wear mechanisms of valves, adhesive wear, shear strain and abrasive wear could be observed. Also, in the wear mechanisms of seat inserts, adhesive wear, surface fatigue wear and abrasive wear could be observed.

• Journal of Advanced Navigation Technology
• /
• v.20 no.3
• /
• pp.258-264
• /
• 2016

In this paper, we propose a computationally efficient direction of arrival (DoA) estimation algorithm based on propagator method with non-uniform array. While the co-prime array techniques can improve the resolution of DoA, they generally lead to high computational complexity as the length of the coarray aperture. To reduce the complexity we use the propagator method that does not require singular value decomposition (SVD). Through simulations, we compare MUSIC with uniform lineary array, propagator method with uniform linear array, MUSIC with co-prime array, and the proposed scheme and observe that the performance of the proposed scheme is significantly better than MUSIC or propagator method with uniform linear array while it is slightly worse than computationally much more expensive co-prime array MUSIC scheme.

• KIEAE Journal
• /
• v.15 no.2
• /
• pp.27-35
• /
• 2015

Purpose: Healthcare is on the whole a personal and critical service that consumer's use, whereas hospitalization is as a rule painful, because nature nurtures and Sun Light Luminosity for healthcare settings is considered healing. The performance and design of climate responsive buildings such as AKU requires a detailed study of attributes of climate both at micro as well as macro level. The therapeutic value of contact with nature through window view, greenery and landscape is calculated there. Method: A two prong strategy is been devised for this article, at micro level three typical morphologies are analysed by creating same environment of neighboring building on sun shading chart, radiation and temperature range. Since the analysis of local climate helps to determine the design strategies for hospital Healing Environment which is suitable for Karachi climate; in order to track the macro climatic behaviour, a considerable analysis of psychometrics chart for AKU Karachi are designed on Climate Consultant (CC) and analysed by Machine Learning. Climate Consultant proposes different design strategies suitable for Karachi. And on the other hand time wise illumination sources for clinical area which are then measured on psychrometric chart- according to singular space: multi patient admission, secondly: acute ambulatory ward, and tertiary: multi windowed space according to the mushrabiyah and sky light pattern. Result: Our findings support the hypothesis that windowed wall is 75-80% more healing wall; an accelerated evidence was found for healing at macro level if the form of the hospital is designed according to the climatologically preferences, whereas at micro level: the light resource becomes the staff attentiveness determinant. In Conclusion evidence was provided that the actual form of luminosity results consequently in satisfaction while light entering from several set of windows and other sources might be valued if design according to the healing environment. The data added on the sun shading chart to calculate rays entraining into space in patient room equal to 124416.21 Watts/ meter $m^2$ is calculated as precise healing rate-and is confirmed by questionnaire from patients belonging from each clinical stage having different illnesses.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.7
• /
• pp.799-808
• /
• 2016

The IEEE 802.15.7r1 Task Group (TG7r1), known as the revision of the IEEE 802.15.7 Visible Light Communication standard targeting the commercial usage of visible light communication systems which mainly use either image sensors or cameras, is of interest in this paper. The vast challenge in Image Sensor Communications (ISC), as it has been addressed in the Technical Consideration Document (TCD) of the TG7r1, is the Image Sensor Compatibility to support the variety of different commercial cameras available on the market. The on-going ISC standard must adhere to compatible image sensors regulations. This paper brings an inside review of the TG7r1 and an inside look of related works on Image Sensor Communications. The paper analyzes the compatibility features by introducing a revised model of receiver to explain how those features are necessary. One of the most challenging but interesting features is the capability in being compatible to camera frame rates. The variation of camera frame rate is modeled from verified experimental results. Noticeably, three singular approaches to support frame rates compatibility, including temporal approach, spatial approach, and frequency-domain approach, are proposed on the paper along with concise definitions. Those schemes have been presented as valuable proposals on the call-for-proposal meeting series of the TG7r1 recently.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.383-388
• /
• 2005

Depth recovery in robot vision is an essential problem to infer the three dimensional geometry of scenes from a sequence of the two dimensional images. In the past, many studies have been proposed for the depth estimation such as stereopsis, motion parallax and blurring phenomena. Among cues for depth estimation, depth from lens translation is based on shape from motion by using feature points. This approach is derived from the correspondence of feature points detected in images and performs the depth estimation that uses information on the motion of feature points. The approaches using motion vectors suffer from the occlusion or missing part problem, and the image blur is ignored in the feature point detection. This paper presents a novel approach to the defocus technique based depth from lens translation using sequential SVD factorization. Solving such the problems requires modeling of mutual relationship between the light and optics until reaching the image plane. For this mutuality, we first discuss the optical properties of a camera system, because the image blur varies according to camera parameter settings. The camera system accounts for the camera model integrating a thin lens based camera model to explain the light and optical properties and a perspective projection camera model to explain the depth from lens translation. Then, depth from lens translation is proposed to use the feature points detected in edges of the image blur. The feature points contain the depth information derived from an amount of blur of width. The shape and motion can be estimated from the motion of feature points. This method uses the sequential SVD factorization to represent the orthogonal matrices that are singular value decomposition. Some experiments have been performed with a sequence of real and synthetic images comparing the presented method with the depth from lens translation. Experimental results have demonstrated the validity and shown the applicability of the proposed method to the depth estimation.

• Journal of Arbitration Studies
• /
• v.29 no.4
• /
• pp.121-140
• /
• 2019

China, Hong Kong, Macao, and Taiwan have a singular political relationship. This distinctive relationship creates a unique impact on the nationality of the arbitral awards among the said countries. Each of these regions does not adopt the arbitral award of the other party as either a foreign arbitration award or a domestic arbitration award, but separately adopts the arbitral award in different jurisdictions within the same country. Therefore, in order to approve and enforce their arbitral awards in other areas, they have no choice to apply special laws or the conventions concluded between them, neither the New York Convention nor the individual arbitration laws in those areas. Therefore, this paper reviewed the convention and self-established laws among China, Hong Kong, Macao, and Taiwan regarding the approval and execution of the other arbitral awards. In addition, the domestic laws in China, Hong Kong, Macao, and Taiwan are compared with the New York Convention to ascertain the criteria for distinguishing domestic and foreign arbitral awards. This study also compared and analyzed what criteria were established for the determination of the nationality of the arbitral awards in the domestic law or the convention concluded in pan China. Through the analysis of these contents, the characteristics and problems of criterion for the determination of nationality among China, Hong Kong, Macao, and Taiwan were identified. Based on the results, this study examined the precautions Korean companies entering these regions should use in the arbitration system in these areas.