• 전력전자학회논문지
• /
• 제11권3호
• /
• pp.266-273
• /
• 2006

선형유도전동기의 순시 속도에서의 1,2차 상대 위치이동으로 나타나는 동 특성과 이 때의 단부효과를 고려한 등가회로 해석방법을 이용하여 시스템을 모델링하고 SVPWM 구동시스템에 적용한 정속도 제어 특성을 부하조건에 따른 동작특성으로 시뮬레이션하여 SVPWM 구동 편측형 선형유도전동기시스템에 적용가능성을 입증하였다.

• Journal of Electrical Engineering and Technology
• /
• 제8권3호
• /
• pp.581-587
• /
• 2013

Among different linear motors, single-sided linear induction motors have been widely used in industry due to their simplicity and low construction cost. However, these types of motors suffer from low efficiency and power factor. In this paper, an effective procedure is proposed to design single-sided linear induction motors. The designed motor is simulated in MATLAB software in order to investigate the effect of design parameters on the performance of the machine. Regarding the obtained results, the Genetic Algorithm is employed to optimize the design considering product of efficiency and power factor as objective function. The results show significant improvement of the performance. Finally, experimental results and 2D finite element method is used to validate the model parameters and the optimization results.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.49-54
• /
• 2005

Linear metro with single sided linear induction motor is applied to the urban transit system because of non adhesion drive. But linear induction motor is required to reduce the energy consumption to maximize efficiency of LIM. In this paper, design requirements such as pole pitch, motor length, air gap, overhang length and the material of secondary sheet are investigated as major parameter of SLIM. It is effective for increasing the efficiency to adopt the copper reaction plate and decrease the mechanical air gap as small as possible.

• 대한전기학회논문지
• /
• 제39권5호
• /
• pp.445-452
• /
• 1990

In order to design a conveyer system which is driven by short primary single sided linear induction motors (SLIM), the thrust force characteristics of SLIM have been calculated from the fundamental equation based on Maxwell's electromagnetic equation and by varying the various design parameters. A conveyer system of moving secondary has been constructed using the design values obtained by the simulation and these values are compared with the experimental values. The control method of the conveyer system is also proposed.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.453-456
• /
• 2001

The thrust control characteristics of single-sided linear induction motor (SLIM) is achieved using PI controller in this paper. The trembling of air gap length between the primary winding and the secondary structure of the SLIM must be minimized in order to get quick response results. Also, the input voltage of SLIM is involved with the time harmonics because most SLIM is driven by inverter. According to the feedback linear control system, this paper describes with applying the non-linear control, speed and estimated flux algorithm. At the result of this experiment, we reached to the improvement of thrust characteristics with PI controller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.689-691
• /
• 1992

In this study, slip frequency control for a single-sided linear induction motor(SLIM) is discussed. We adopted variable slip frequency pattern in stead of constant slip frequency pattern under V/f constant mode, which is effective in improving driving efficiency of SLIM. And the dynamic characteristics are analyzed by using equivalent circuit during the accelerating time.

• 대한전기학회논문지
• /
• 제39권8호
• /
• pp.820-827
• /
• 1990

For the purpose of investigation the thrust force, the lateral force, and the eddy current loss when the primary and the secondary of a single-sided linear induction motor is displaced in the space, this paper proposes an analysis technique for the characteristics of the eddy current induced on the secondary and the magnetic flux density distribution in the y-z plane by F.E.M. To verify the effectiveness of this analysis technique, the starting-thrust force due to a lateral displacement is compared to the experimental data.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.15-19
• /
• 1989

In this paper, the thrust force characteristic of SLIM according to the variation of several parameters was calculated from the fundamental equation based on Maxwell' s electromagnetic equation to design the transportation system which is drived by short primary single sided linear induction motor. The transportation system of moving secondary was constructed by the design values calculated on the base of simulated data and this values were compared to experimental values, and also the control method of transportation system was proposed.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.45-49
• /
• 1998

In this paper, the direct thrust control of PWM Inverter-fed Single-sided Linear Induction Motor (hereinafter referred to as "SLIM") is achieved with Space Vector control and PI control. The trembling of air gap length which is occured between the primary winding core and the secondaty structure of the SLIM must be minimized in order to get quick response characteristic. First, voltage equations of SLIM are shown on the suitable d-q axis equivalent circuits which analyze characteristics of the thrust and the normal force. Also, modeling and analysis of the d-q axis equivalent circuits are able to make robust transient thrust from the current regulation in the equivalent circuits. These results exemplified the direct drive of SLIM with the reference speed and thrust were verified by the experiments.periments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.1004-1006
• /
• 1993

A new method for the optimal design of a single-sided linear induction motor(SLIM) is presented. The method utilizes the neural networks and finite element method for optimizing the design parameters of SLIM. The finite element analysis is used to produce a variety of neural networks training data and the neural networks is used for optimizing the design parameters by sequential unconstrained minimization technique(SUMT). As a result, it is known that the novel method is very efficient and accurate as an optimization technique.