• 한국통신학회논문지
• /
• 제8권4호
• /
• pp.139-144
• /
• 1983

本論文에서는 MCT(magnito-optic current transformer)를 구성하기 위한 單一모우드光纖維의 偏光特性 및 파라데이回轉에 대한 分析 및 實驗을 하였다. 分析過程에서 單一모우드光纖維는 線形延器로 모델링하였으며 측정결과 순수 birefringence는 2.57 /m로 나타났고 구부림에 의한 birefringence는 구부림 반지름의 제곱에 반비례하였다. 그리고 파라데이回轉에 대한 理論的解析의 결과 자계의 세기(H)에 대한 편광회전감도(F)는 F/H=1.4x$10^-5$rad/[Am]로 나타났다.

• 로봇학회논문지
• /
• 제9권4호
• /
• pp.250-257
• /
• 2014

In this paper, a new mobile robot, so called a rollerbot, is presented, which has single body and rugby-ball shaped roller wheel. A rollerbot has single point contact on ground and low energy consumption in motion because of the reduced friction. By changing center of mass using a balancing weight, a rollerbot is able to get steering force. The vertical position of mass center of the rollerbot in this paper is designed to lie inside radius of the roller wheel, so that to have stable equilibrium position. Thus, the posture and the steering control of the rollerbot can be easily done by changing the center of mass. Kinematics of the rollerbot is derived by transformation of differential motion in this paper.

• 대한기계학회논문집B
• /
• 제30권5호
• /
• pp.480-488
• /
• 2006

Numerical simulations of flow over two spheres placed in a tandem arrangement are conducted to investigate the effect of the inter-sphere spacing on the flow characteristics. The Reynolds numbers considered are 100, 250, 300 and 425, corresponding to steady axisymmetric, steady planar-symmetric, unsteady planar-symmetric, and unsteady asymmetric flows, respectively, in the case of a single sphere. For small inter-sphere spacings, the flow past two spheres is more stable than that past a single sphere. For example, with the spacing of the sphere radius, the flow is steady axisymmetric up to Re=300. However, for relatively large spacings, the flow past two spheres becomes unstable and vortex shedding takes place even at Re=250. The drag coefficient of the rear sphere decreases significantly with decreasing inter-sphere spacing due to reduction of the stagnation pressure, thus being smaller than that of the front sphere. Also, the rear sphere shows large fluctuations of the lift force as compared to the front one in the case of unsteady flow.

• Journal of the Korean Physical Society
• /
• 제73권10호
• /
• pp.1410-1419
• /
• 2018

A skier's motion was analyzed by a simple model consist of point mass m and a single rod connected to a single ski plate. We studied the conditions for the stable ski turn as functions of the linear velocity and the radius of the turn. The solutions for the stable ski turn in our model do not require any extra skier's movement to complete a stable circular turn. The solution may then give the skier the most comfortable skiing method without any active movement to control the ski. The generalized force supporting the point mass from the ski plate was calculated. We obtained the force from the ground (rebound force) without any geometrical structure of the ski plate. Adding an active movement to the direction of the ski plate, the conditions for the stable ski turn were also analyzed. Our result gives some insight for the skier who wants to develop technique.

• 한국가시화정보학회지
• /
• 제18권3호
• /
• pp.52-60
• /
• 2020

When a bubble reaches a free surface, a bursting of the bubble produces a high speed jet. Despite its practical importance, significant effort has been devoted to investigate a bursting jet by a single bubble near a free surface. In the present study, we perform numerical simulations of bubbles in a tandem arrangement at Bo=0.05. The configuration of the tandem bubbles is systematically varied by changing a radius of a following bubble (RF) and the gap distance between two bubbles (L). Compared to a single bubble case, we show that the bursting bubble in the tandem arrangement accelerates, and the jet velocity increases. Moreover, we find that a critical gap distance at which the jet velocity unexpectedly changes exists in the tandem case.

• 한국통신학회논문지
• /
• 제14권2호
• /
• pp.121-136
• /
• 1989

圓筒形 物體의 오목면과 블록면의 表面에 密着하여 設置한 마이크로스트립 어레이 안테나의 輻射 特性에 관하여 理論的 解析을 試圖하였으며, 實驗을 통하여 檢證하였다. 單一素子 안테나의 解析은 傳送線路 모델法을 適用하였고, 어레이 안테나의 理論은 曲面 위에 2次元的으로 配列된 각각의 單一素子에 대하여 座標移動과 回轉을 考慮한 座標變換法으로 解析하여 遠距離에서의 合成 電界 强度를 數値計算으로 구하였으며, 10GHz에서 4素子 竝列 어레이 안테나 및 마이크로스트립 給電線路를 設計 製作하여 여러 가지 曲率半徑에 대하여 反射損失, 共振周波數, 輻射패턴, 半 電力 비임幅, 利得 등과 같은 諸 輻射特性을 測定하겨 理論値와 比較 考察하였다. 理論에서 豫測한 바와 같이 오목면과 블록면에서 모두 曲率半徑의 減少에 따라 輻射 패턴의 비임 폭이 더 커지는 것을 確認하였으며, 曲面에서 座標變換法으로 計算한 마이크로스트립 竝列 어레이 안테나의 合成 輻射電力 패턴이 測定値와 잘 一致하였다. 아울러 曲率半徑의 變化에 따른 周波數의 變化, 入力 임피던스 및 利得의 變化는 無視할 수 있을 程度임을 確認하였다.

• 대한원격탐사학회지
• /
• 제23권5호
• /
• pp.409-420
• /
• 2007

Since 1988, pine wilt disease has spread over rapidly in Korea. It is not easy to detect the damaged pine trees by pine wilt disease from conventional remote sensing skills. Thus, many possibilities were investigated to detect the damaged pines using various kinds of remote sensing data including high spatial resolution satellite image of 2000/2003 IKONOS and 2005 QuickBird, aerial photos, and digital airborne data, too. Time series of B&W aerial photos at the scale of 1:6,000 were used to validate the results. A local maximum filtering was adapted to determine whether the damaged pines could be detected or not at the tree level from high resolution satellite images, and to locate the damaged trees. Several enhancement methods such as NDVI and image transformations were examined to find out the optimal detection method. Considering the mean crown radius of pine trees, local maximum filter with 3 pixels in radius was adapted to detect the damaged trees on IKONOS image. CIR images of 50 cm resolution were taken by PKNU-3(REDLAKE MS4000) sensor. The simulated CIR images with resolutions of 1 m, 2 m, and 4 m were generated to test the possibility of tree detection both in a stereo and a single mode. In conclusion, in order to detect the pine tree damaged by pine wilt disease at a tree level from satellite image, a spatial resolution might be less than 1 m in a single mode and/or 1 m in a stereo mode.

• 대한기계학회논문집A
• /
• 제40권8호
• /
• pp.693-701
• /
• 2016

본 논문에서는 파괴역학적 방법으로 노치 결함을 평가해 보았다. 인장 하중과 굽힘하중이 작용하는 중앙 균열, 모서리 균열 평판 구조물을 바탕으로 노치 크기를 달리하며 한계하중 및 에너지해방률을 유한요소 해석의 J-적분으로 도출하였다. 노치의 반경이 커짐에 따라 한계하중은 큰 변화가 없었으며, 에너지해방률는 커지는 양상을 보였다. 노치 반경에 따른 재료 파괴인성($J_{IC}$)측정을 위해 실험을 대신한 유한요소 연성파손 모사기법을 사용하였다. 그 결과 노치 크기 증가에 따른 에너지해방률 증가량 대비 파괴인성($J_{IC}$) 증가량이 더욱 큰 양상을 보였다. 이런 결과를 통해 노치 반경이 커질수록 균열 진전에 대한 저항성이 커진다는 사실을 알 수 있었다.

• 한국해안·해양공학회논문집
• /
• 제26권2호
• /
• pp.103-111
• /
• 2014

크기가 작은 다수의 부이들이 원형으로 배열되어 있을 때 부이를 통한 추출 파워를 포텐셜이론 통하여 살펴보았다. 부이의 크기와 배열 간격이 수심과 파장 그리고 설치면적의 반경에 비하여 작다는 가정 아래에서 다수부이로 채워진 수면에서의 경계조건식을 유도하고 이를 포함한 경계치문제를 고유함수전개법을 이용하여 해석하였다. 추출 파워와 입사파 에너지의 비인 취득 폭을 packing ratio, 배열 반경, 그리고 PTO 감쇠계수를 바꿔가면서 살펴보았다. 또한 다수의 소형 부이를 원형 배열하였을 때 추출된 파력이 같은 잠긴 체적을 갖는 대형 단일 부이보다 효율적임을 계산을 통하여 밝혔다.

• 대한치과기공학회지
• /
• 제45권3호
• /
• pp.67-73
• /
• 2023

Purpose: This in vitro study aimed to evaluate the clinical acceptability of precision of fit of the support thickness of Co-Cr alloy copings fabricated using selective laser melting (SLM). Methods: Thirty dental stone models of maxillary left molar abutments were manufactured, images were taken using a scanner, and a computer-aided design program was used to design the form of a conventional metal ceramic crown coping. Overall, 30 single copings were made from Co-Cr alloy using SLM and divided into three support radius groups (0.1, 0.25, and 0.35 mm) of 10 for each. Digitized data were superimposed with three-dimensional inspection software to quantitatively obtain the machinability of a ceramic crown coping, and visual differences were confirmed using a color map. The root mean square values of the ceramic crown coping group were statistically analyzed using one-way analysis of variance (α=0.05). Results: The precision of fit was superior with 0.25 mm compared with 0.1 mm and 0.35 mm, and the results exhibited significant differences (p<0.05). All specimens showed that various support thicknesses did not exceed the clinically permitted value of 120 ㎛, which mean that more than 0.1 mm and 0.35 mm of support radius for SLM was adequate. Conclusion: The support thickness of Co-Cr alloy restoration fabricated using SLM is shown to affect the adaptation.