• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.119-124
• /
• 2008

Recently, focus has been drawn on natural refrigerants due to increasing concern on global warming. As a consequence, CO2 systems such as a heat pump water heater using CO2 as a refrigerant are rapidly growing on the market. Currently, rolling piston rotary compressors are widely used for CO2 heating and/or refrigeration systems. There are several ways of realizing gas compression structure. They are single stage compression with single cylinder, single stage compression with two cylinders, and two stage compression with two cylinders. In this paper, computer simulation program which was validated for a single stage rotary compressor with one cylinder has been extended for a single stage, two cylinder rotary type. Numerical investigation has been made on optimal design for the cylinder configuration using the extended simulation program. For a single stage two cylinder rotary compressor having a displacement volume of 4 cc for each cylinder, compressor efficiency has been found to be maximum when the cylinder radius and height are 31mm and 10mm, respectively.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1997년도 Proceedings of the 12th KACG Technical Meeting and the 4th Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.149-155
• /
• 1997

We have successfully grown colorless and transparent Rb-doped potassium niobate (KRN) single crystals using the top seeded solution growth(TSSG) technique. In our crystal growth experiments, the Rb doping concentrations within the melt range from 2-15 mol% relative to that of Nb$_2$O5. Atomic absorption measurements indicate that the Rb content in the KRN solid solution is rather low; the Rb segregation coefficient is found to be on the order of 0.05. It is believed that this is due to the relatively much larger Rb+ ionic radius compared to that of K+, rendering it more difficult for Rb to replace K in the KNbO$_3$(KN) host lattice. Preliminary single-pass second harmonic generation (SHG) experimental results indicate that there exists marginal improvement in the phase-matching temperature tolerance of KRN compared to that of pure Kn single crystals.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.538-541
• /
• 2003

Ultra-precision machining was carried out on a electroless nickel materials using single crystal diamond tools. The effects of the cutting velocity, the tool length, the tool nose radius, the feed rate and depth of cut on the surface roughness were studied. In this paper, the cutting condition for getting nano order smooth surface of electroless nickel have been examined experimentally by the ultra-precision machine and single crystal diamond tools. And also. the surface roughness was measured by the three dimension

• Journal of the Korean Physical Society
• /
• 제73권10호
• /
• pp.1502-1505
• /
• 2018

We present a design for hybrid circular Bragg gratings (hCBGs) for efficiently extracting single-photons emitted by InAs quantum dots (QDs) embedded in GaAs. Finite-difference time-domain simulations show that a very high photon collection efficiency (PCE) up to 96% over a 50 nm bandwidth and pronounced Purcell factors up to 19 at cavity resonance are obtained. We also systematically investigate the geometry parameters, including the $SiO_2$ thickness, grating period, gap width and the central disk radius, to improve the device performances. Finally, the PCEs and the Purcell factors of QDs located at different positions of the hCBG are studied, and the results show great robustness against uncertainties in the location of the QD.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 춘계학술대회논문집
• /
• pp.123-128
• /
• 2000

Fundamental and informative data of axi-symmetric stretch-drawing of several sheetmetals with thicknesses of 0.7-1.0mm are presented both for single and double operations. Very small radius is applied to the die profile (or-shoulder) ion all operations. to induce wall-thinning by the effect of bending-under-tension from which the name 'stretch-drawing' comes. It is clearly demonstrated that deeper cups could be formed by single and double stretch-drawings from smaller circular blanks due to such wall-thinning action than in the usual deep-drawing of larger blanks, From this fact it is emphasized that the deep-drawability of a sheet metal is not evaluated simply by the conventional L.D.R (limiting drawing ratio) but the depth of the drawn cup should also be taken into account./ Many experimental data about various metals and thicknesses given in this paper offer a valuable information in this process for more general use which recommends to replace the conventional deep-drawing process by the stretch-drawing process both for single and double operations. In the single stretch-drawing it is also confirmed that a deeper cup can be produced by raising the blank-holding force at later stage of operation.

• 한국광학회지
• /
• 제35권4호
• /
• pp.143-149
• /
• 2024

대기 중을 진행하는 레이저 빔에 대기 요동이 미치는 영향을 단일 위상판 모델 및 다수 위상판 모델로 분석하고 비교하였다. 파장이 1064 nm 이고 반지름이 10 mm인 레이저 빔을 1인치 광학계로 시준하여 3 km를 진행하는 경우에 대해 대기 요동 강도를 나타내는 구조 상수 C_n²를 10^-17부터 10^-14까지 변화시켜가며 단노출 빔 형상을 단일 및 다수 위상판 모델로 확인하였다. 구조 상수에 따른 레이저 빔의 변화를 정량화하기 위해 장노출에 대한 유효 수광 출력과 빔 크기 값을 사용하였으며, 구조 상수가 증가함에 따라 이 값들은 단일 및 다수 위상판 모델에서 공통적으로 증가하는 경향을 보였다. 구조 상수인 C_n²가 2×10^-15보다 작은 경우 하나의 위상판 사용 대비 다수의 위상판 사용 사이에 1.5% 이내의 장노출 유효 수광 출력과 빔 크기 차이만 발생하였지만, 그 이상인 경우 결과값의 차이가 지속적으로 증가하였다. 즉 3 km 진행하는 레이저빔은 구조 상수 2×10^-15 이상에서 다수 위상판 모델을 사용해야 함을 확인하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1994년도 봄 학술발표회 논문집
• /
• pp.89-94
• /
• 1994

Latticed domes take form a curved surface by arranged members with certain patterns. For this reason, it is possible for the characteristics of vibration to complicate by change of various parameters of dome; grid-pattern, boundary condition and ratio of radius-height etc. Therefore, it is important to clarify the effect by these parameters before generalized dynamic response analysis. So this study deals with free vibration analysis of latticed domes and makes clear an effect of shape coefficient, that is, geometrical characteristics of latticed domes, on the vibration characteristics.

• 한국세라믹학회지
• /
• 제24권4호
• /
• pp.313-320
• /
• 1987

Fracture toughness of hot pressed cordierite-SiC whisker ceramic composites contained up to 40vol.% SiC whiskers were determined by using the indentation crack length(IC), indentation strengthin-bending(IS), and single-edge notched-beam(SENB) methods. The results were compared to stress intensity factor, KB, at the crack branching boundary measured by using the mirror zone radius (MZ) method. IS method seems to provide a more reasonable estimation of fracture toughness than other methods for these composites.

• 소성∙가공
• /
• 제12권3호
• /
• pp.228-235
• /
• 2003

In this paper, the workability of flange in the radial extrusion is analyzed in terms of the deformation pattern, the punch load and the forming limit by using simulation and experiment. A single action pressing is applied to both simulation and experiment. The analysis in this study is focused on the transient extrusion into the gap in radial direction with various gap heights and die corner radius. Based on the surface strains where surface cracking occurs, the forming patterns and strain-fracture relationships in producing radially extruded flange are obtained.

• Nonlinear Functional Analysis and Applications
• /
• 제29권1호
• /
• pp.99-111
• /
• 2024

In this paper, a new seven-parameter Mittag-Leffler function of a single complex variable is proposed as a generalization of the standard Mittag-Leffler function, certain generalizations of Mittag-Leffler function, hypergeometric function and confluent hypergeometric function. Certain essential analytic properties are mainly discussed, such as radius of convergence, order, type, differentiation, Mellin-Barnes integral representation and Euler transform in the complex plane. Its relation to Fox-Wright function and H-function is also developed.