• Journal of Information Display
• /
• v.2 no.2
• /
• pp.22-26
• /
• 2001

This paper presents the idea of staggered voting for the efficient TMR implementation of shift register chains for improving the yield of Poly-Si TFT-LCD driving circuits. The paper discusses the characteristic features of staggered voting and performs a quantitative evaluation of its effectiveness. Staggered voting allows us to improve the reliability of a single-voter TMR chain significantly when the probability of a voter failure is not negligible.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.9
• /
• pp.1346-1352
• /
• 2006

We describe an effective method of microchip electrophoresis (ME) based on single strand conformation poly-morphism (SSCP) analysis to rapidly detect the point mutation, Leu72Met, in a human obesity gene. The 207-bp dsDNA in the Leu72Met region, an estimate of the child obesity DNA mutant, was amplified by polymerase chain reaction (PCR) and submitted to a conventional glass microchip analysis with a sieving matrix of 1.75% poly(vinylpyrrolidone) (Mr 1 300 000), 1.0% poly(ethyleneoxide) (Mr 600 000) and 5.0% w/w glycerol. When combined with base stacking (BS) with hydroxide ions, the SSCP-ME provided rapid analysis as well as sensitive detection. The detection sensitivity was effectively enhanced in the OH- concentration range of 0.01-0.025 M NaOH. The sensitivity and speed of this ME-based SSCP methodology for the rapid detection of Leu72Met point mutations makes this an attractive method for diagnosing childhood obesity in a clinical diagnostic laboratory.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.235-238
• /
• 2005

Sulfonated poly(ether sulfone) copolymers (PESs) were synthesized using hydroquinone 2-potassium sulfonate (HPS) with other monomers (bisphenol A and 4-fluorophenyl sulfone). PESs with different $mole\%$ of hydrophilic group were prepared by changing the mole ratio of HPS in the polymerization reaction. The chemical structure and the thermal stability of these polymers were characterized by using $^1H-NMR$, FT-IR and TGA techniques. The PES 60 membrane, which has $60 mole\%$ of HPS unit in the polymer backbone, has a proton conductivity of 0.091 S/cm and good insolubility in boiling water. The TGA showed that PES 60 was stable up to $272^{\circ}C$ with a char yield of about $29\%\;at\;900^{\circ}C\;under\;N_2$ atmosphere. To investigate the single cell performance, the catalyst coated PES 60 membrane was used and a single cell test was carried out using $H_2/O_2$ gases as fuel and oxidant at various temperatures. We observed that the cell performance was enhanced by increasing the cell temperature. A current density of $1400 mA/cm^2$ at 0.60 V was obtained at $70^{\circ}C$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.2
• /
• pp.156-161
• /
• 2007

This paper describes the characteristics of polycrystalline ${\beta}$ or 3C (cubic)-SiC (silicon carbide) thin films heteroepitaxailly grown on Si wafers with thermal oxide. In this work, the poly 3C-SiC film was deposited by APCVD (atmospheric pressure chemical vapor deposition) method using HMDS (hexamethyildisilane: $Si_{2}(CH_{3}_{6})$ single precursor. The deposition was performed under various conditions to determine the optimized growth conditions. The crystallinity of the 3C-SiC thin film was analyzed by XPS (X-ray photoelectron spectroscopy), XRD (X-ray diffraction) and FT-IR (fourier transform-infrared spectometers), respectively. The surface morphology was also observed by AFM (atomic force microscopy) and voids or dislocations between SiC and $SiO_{2}$ were measured by SEM (scanning electron microscope). Finally, depth profiling was invesigated by GDS (glow discharge spectrometer) for component ratios analysis of Si and C according to the grown 3C-SiC film thickness. From these results, the grown poly 3C-SiC thin film is very good crystalline quality, surface like mirror and low defect. Therfore, the poly 3C-SiC thin film is suitable for extreme environment, Bio and RF MEMS applications in conjunction with Si micromaching.

• Korean Journal of Materials Research
• /
• v.2 no.6
• /
• pp.408-416
• /
• 1992

Stable TiS$i_2$was formed by RTA on single-Si and on poly-Si. Subsequently, an Al-1% Si layer with 600-nm thick was deposited on top of the TiS$i_2$, Finally, the specimens were annealed for 30min at 400-60$0^{\circ}C$in $N_2$ambient. The thermal stability of Al-1% Si/TiS$i_2$bilayer and interfacial reaction were investigated by measuring sheet resistance, Auger electron spectroscopy (AES), and scanning electron microscopy (SEM). The composition and phase of precipitates formed by the reaction of Al-1% Si with Ti-silicide were studied by energy dispersive spectroscopy (EDS), X-ray diffraction (XRD). In the case of single-Si substrate the reaction of Al-1% Si layer with TiS$i_2$layer resulted in precipitates, consuming all TiS$i_2$layer at 55$0^{\circ}C$. On the other hand, the disappearance of TiS$i_2$on poly-Si occurred at 50$0^{\circ}C$ and more precipitates were formed by the reaction of Al-1% Si/TiS$i_2$on potty-Si substrate than those of the reaction on single-Si substrate. This phenomenon resulted from the fact that Ti-silicide formed on poly-Si was more unstable than on single-Si by the effect of grain boundary. By EDS analysis the precipitates were found tobe composed of Ti, Al, and Si. X-ray diffraction showed the phase of precipitates to be theT$i_7$A$l_5$S$i_12$ternary compound.

• Journal of Information Display
• /
• v.2 no.2
• /
• pp.45-51
• /
• 2001

Four types of conjugated polymers, poly(MEHPV-PV), poly(MEHPV-BPV), poly(MEHPV-AV) and poly(PZV-AV) were synthesized by Homer-Emmons reaction using potassium tert-butoxide. The Homer-Emmons reaction gave electroluminescent(EL) copolymers in good yield. Of the EL copolymers synthesized, poly(PZV-AV) containing phenothiazinylene vinylene and anthrylene vinylene as repeat unit exhibited red color in the light emitting diode(LED) which was very close to the NTSC standard red. Besides, double layer LED made with $Alq_3$ electron transport layer exhibited both enhanced emission intensity and efficiency compared to the single layer LED.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.342-344
• /
• 1995

Using piezoresistive effects of single-crystal and poly-crystalline silicon, pressure sensors of the same pattern were fabricated for comparison of temperature characteristics. Optimum size and aspect ratio of rectangular sensor diaphragm were calculated by FEM. For polsilicon pressure sensor, polysilicon resistors of Wheatstone bridge were deposited by LPCVD to be used in a wide' temperature range. Polysilicon pressure sensors showed more stable temperature characteristics than single-crysta1 silicon in the range of $-20\sim125[^{\circ}C]$. To get low TCO (Temperature Coefficient of Offset), below $\pm$3 [${\mu}V/V/^{\circ}C$], it is needed for each TCR of piezoresistors to have a deviation within $\pm25[ppm/^{\circ}C]$ less than $\pm500[ppm/^{\circ}C]$ of resistors for polysilicon pressure sensor can result in low TCS(Temperature Coefficient of Sensitivity) of -0.1[%FS/$^{\circ}C$].

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.537-537
• /
• 2012

We have studied a fabrication of vapor phase polymerized Poly(3,4-ethylenedioxythiophene) (PEDOT) nanowire arrays for the first time. The vapor-phase polymerization (VPP) technique is a bottom-up processing method that utilizes the organic arrangement of macromolecules to easily produce ordered aggregates, including on the nanoscale, or prepare thin films of self-assembled molecules, micropatterns, or modified microstructures of pure conducting polymers. Also, liquid-bridge-mediated nanotransfer molding (LB-nTM), which was reported as a new direct patterning method recently, is for the arrayed formation of two- or three-dimensional structures with feature sizes as small as tens of nanometers over large areas up to 4 inches across and is based on the direct transfer of various materials from a mould to a substrate through a liquid bridge between them. The PEDOT nanowires grown by VPP method and transferred on a substrate to use LB-nTM method have been fabricated to single crystal PEDOT nanowires investigated Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Selected Area Electron Diffraction (SAED), X-Ray Diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), and electrical properties.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.3
• /
• pp.162-167
• /
• 2015

To investigate the effect of fluoro groups substitution on poly(p-phenylenevinylene) derivatives, poly(2,3,5,6- tetrafluoro-p-phenylenevinylene-alt-N-ethylhexyl-3,6-carbazolevinylene), PCTF-PPV, and poly[2,3,5,6-tetrafluoro-p-phenylenevinylene-alt-2-methoxy-5-(2-ethylhexyloxy)-p-phenylenevinylene], PMTF-PPV, were synthesized by the well-known Wittig condensation polymerization process. To compare the influences of fluoro groups, no fluoro groups containing model polymers, poly(p-phenylenevinylene-alt-N-ethylhexyl-3,6-carbazolevinylene), PCPPPV and poly[p-phenylenevinylene-alt-2-methoxy-5-(2-ethylhexyloxy)-p-phenylenevinylene], p-PMEH-PPV, were also synthesized. The resulting polymers were completely soluble in common organic solvents and exhibited good thermal stability up to 300℃. The polymers showed UV-visible absorbance and photoluminescence (PL) in the ranges of 259~452 nm and 500~580 nm, respectively. The tetrafluorophenyl containing PCTF-PPV and PMTF-PPV showed relatively red-shifted PL peaks at 521 nm and 580 nm, respectively, compared to that of non-fluoro groups containing polymers (PCP-PPV: 500 nm and p-PMEH-PPV: 539 nm). The single-layer light-emitting diode was fabricated in a configuration of ITO/polymer/Al. Electroluminescene (EL) emissions of PCP-PPV, PCTF-PPV, p-PMEH-PPV and PMTF-PPV were shown at 507, 524, 556, and 616 nm, respectively.

• Polymer(Korea)
• /
• v.29 no.1
• /
• pp.54-58
• /
• 2005

The hydrolytic behavior of microbial poly[(R)-3-hydroxybutyrate]](P(3HB)) has been studied by using two model systems, Langmuir monolayer and solution-grown single crystals (SCs), for elucidating the mechanism for both alkaline and enzymatic degradations. An initial degradation of SCs of P(3HB) leads to breakup lamellae parallel to their short axis (b-axis). Similarly, ridge formation on the lamellar surface appears along the b-axis at lower quenching temperature than melting temperature. Both results support that the lamellar crystals contain less-ordered and more thermally sensitive regions along the b-axis. Although the enzymatic hydrolysis of P(3HB) monolayers was similar to its alkaline one, the enzymatic degradation of P(3HB) monolayers occurred at higher constant surface pressure than the alkaline degradation. This behavior might be attributed to the size of enzymes which is much larger than that of alkaline ions; that is, the enzymes need larger contact area with monolayers to be activated.