• 제목/요약/키워드: single-pass

검색결과 481건 처리시간 0.031초

회전하는 동기 좌표계 d-q 변환을 이용한 단상 능동 전력 필터의 새로운 제어기 (A New Controller of Single Phase Active Power Filter Using Rotating Synchronous Frame d-q Transformation)

  • 강민구
    • 전자공학회논문지
    • /
    • 제51권6호
    • /
    • pp.271-275
    • /
    • 2014
  • 회전하는 동기 좌표계 d-q 변환을 이용한 단상 능동 전력 필터의 새로운 제어기를 제안하였다. 힐버트 변환기를 사용하여 $90{\circ}$의 위상차를 가지는 두 개의 교류 신호를 만든다. 이 신호들을 회전하는 동기 좌표계 d-q 변환을 이용하여 기본파 성분을 직류로 변환할 수 있고 따라서 고조파 검출이 용이하다. 순시 유효 전력의 평균값을 구한다. 역률 보상을 하므로 전원 전류는 전원 전압과 동위상이다. 단상에서의 전력 공식으로부터 전원 전류의 크기를 알 수 있다. 능동 전력 필터의 보상 전류의 기준 신호는 전원 전류의 기준신호에서 부하 전류를 빼주면 구할 수 있다. 새롭게 제안된 제어기에 히스테리시스 전류 제어기를 적용하여 시뮬레이션 하였다. 능동 전력 필터가 부하전류의 고조파와 무효전력을 보상하여 전원 전류가 전원전압과 동위상이 되고 전원전류가 정현파에 가깝게 되는 것을 확인하였다. 힐버트 변환기는 전대역 여파기를 사용하여 구현하였다.

Denoise of Astronomical Images with Deep Learning

  • Park, Youngjun;Choi, Yun-Young;Moon, Yong-Jae;Park, Eunsu;Lim, Beomdu;Kim, Taeyoung
    • 천문학회보
    • /
    • 제44권1호
    • /
    • pp.54.2-54.2
    • /
    • 2019
  • Removing noise which occurs inevitably when taking image data has been a big concern. There is a way to raise signal-to-noise ratio and it is regarded as the only way, image stacking. Image stacking is averaging or just adding all pixel values of multiple pictures taken of a specific area. Its performance and reliability are unquestioned, but its weaknesses are also evident. Object with fast proper motion can be vanished, and most of all, it takes too long time. So if we can handle single shot image well and achieve similar performance, we can overcome those weaknesses. Recent developments in deep learning have enabled things that were not possible with former algorithm-based programming. One of the things is generating data with more information from data with less information. As a part of that, we reproduced stacked image from single shot image using a kind of deep learning, conditional generative adversarial network (cGAN). r-band camcol2 south data were used from SDSS Stripe 82 data. From all fields, image data which is stacked with only 22 individual images and, as a pair of stacked image, single pass data which were included in all stacked image were used. All used fields are cut in $128{\times}128$ pixel size, so total number of image is 17930. 14234 pairs of all images were used for training cGAN and 3696 pairs were used for verify the result. As a result, RMS error of pixel values between generated data from the best condition and target data were $7.67{\times}10^{-4}$ compared to original input data, $1.24{\times}10^{-3}$. We also applied to a few test galaxy images and generated images were similar to stacked images qualitatively compared to other de-noising methods. In addition, with photometry, The number count of stacked-cGAN matched sources is larger than that of single pass-stacked one, especially for fainter objects. Also, magnitude completeness became better in fainter objects. With this work, it is possible to observe reliably 1 magnitude fainter object.

  • PDF

High-rate Single-Frequency Precise Point Positioning (SF-PPP) in the detection of structural displacements and ground motions

  • Mert Bezcioglu;Cemal Ozer Yigit;Ahmet Anil Dindar;Ahmed El-Mowafy;Kan Wang
    • Structural Engineering and Mechanics
    • /
    • 제89권6호
    • /
    • pp.589-599
    • /
    • 2024
  • This study presents the usability of the high-rate single-frequency Precise Point Positioning (SF-PPP) technique based on 20 Hz Global Positioning Systems (GPS)-only observations in detecting dynamic motions. SF-PPP solutions were obtained from post-mission and real-time GNSS corrections. These include the International GNSS Service (IGS)-Final, IGS real-time (RT), real-time MADOCA (Multi-GNSS Advanced Demonstration tool for Orbit and Clock Analysis), and real-time products from the Australian/New Zealand satellite-based augmentation systems (SBAS, known as SouthPAN). SF-PPP results were compared with LVDT (Linear Variable Differential Transformer) sensor and single-frequency relative positioning (SF-RP) solutions. The findings show that the SF-PPP technique successfully detects the harmonic motions, and the real-time products-based PPP solutions were as accurate as the final post-mission products. In the frequency domain, all GNSS-based methods evaluated in this contribution correctly detect the dominant frequency of short-term harmonic oscillations, while the differences in the amplitude values corresponding to the peak frequency do not exceed 1.1 mm. However, evaluations in the time domain show that SF-PPP needs high-pass filtering to detect accurate displacement since SF-PPP solutions include trends and low-frequency fluctuations, mainly due to atmospheric effects. Findings obtained in the time domain indicate that final, real-time, and MADOCA-based PPP results capture short-term dynamic behaviors with an accuracy ranging from 3.4 mm to 8.5 mm, and SBAS-based PPP solutions have several times higher RMSE values compared to other methods. However, after high-pass filtering, the accuracies obtained from PPP methods decreased to a few mm. The outcomes demonstrate the potential of the high-rate SF-PPP method to reliably monitor structural and earthquake-induced ground motions and vibration frequencies of structures.

OTA기반의 차단대역 조정이 가능한 3-입력/1-출력 구조의 다기능 Gm-C 필터 (Stopband Tunable Multifunctional Gm-C Filter based on OTA with Three-Input/Single-Output)

  • 바스넷버룬;방준호;송제호;유인호
    • 한국인터넷방송통신학회논문지
    • /
    • 제15권5호
    • /
    • pp.201-206
    • /
    • 2015
  • 본 논문에서는 연산 트랜스컨덕턴스 증폭기를 기반으로 하여 차단주파수 대역의 조정이 가능한 3-입력와 1-출력단을 갖는 Gm-C필터가 제안되었다. 제안된 필터는 대역통과, 저역통과 및 고역통과의 다기능 필터 특성을 갖는다. 구현된 필터의 중심주파수($f_c$)와 특성요소(Q)값은 다른 필터특성의 변형없이 독립적으로 조정이 가능할 수 있음을 확인하였다. 또한 전체 시스템에 영향을 줄 수 있는 다양한 파라미터들과 기생요소들에 대한 감도특성과 비이상성분석이 수행되었다. 제안된 필터를 CMOS 소자로 구현하기 위하여 1.8V-0.18um 공정파라미터를 사용하였고 HSPICE를 활용하여 특성을 분석한 결과와 기 정리된 이론값들과 비교하여 나타내었다.

이중 효용과 일중 효용을 복합한 다단 재생 고효율 흡수식 냉동 사이클 개발 (Development of High Efficiency Cycle by Combining Double-Effect with Single-Effect Absorption Chiller Systems)

  • 윤상국
    • 설비공학논문집
    • /
    • 제29권7호
    • /
    • pp.360-365
    • /
    • 2017
  • Recently, development efforts of triple-effect absorption chiller have been increased in order to improve the efficiency of double-effect absorption chiller. However, triple-effect absorption chiller has some disadvantages, including high corrosion characteristic of LiBr solution at high temperature of $200^{\circ}C$. Moreover, it is necessary to develop new components for operation under high pressure of 2 bars even though COP is increased to 1.6 or 1.7. The objective of this study was to introduce a new system by combining double effect absorption chiller with single effect absorption chiller with multi-generators using bypass flow of LiBr dilute solution to $3^{rd}$ generator to overcome the disadvantages of triple-effect chiller and improve energy efficiency. Results indicate that the new absorption cycle had a much higher efficiency than double-effect chiller system, showing significant improvement when bypass solution flow rate of 25% was applied to the $3^{rd}$ generator using the main dilute solution of the absorber. The COP of the new chiller system was found to be 1.438, which was 21.7% higher than that (1.18) of the present double-effect system. The COP was decreased when solution by-pass rate to the $3^{rd}$ generator was increased. In addition, lower cooling water temperature caused higher COP. Therefore, the multi-generator system with by-pass solution might be an excellent chiller alternative to triple-effect absorption chiller with higher efficiency.

펄스형 Nd:YAG 레이저의 출력특성과 이득계수 측정 (Output characteristics and measurement of the gain coefficient of a pulsed Nd:YAG laser)

  • 박대윤
    • 한국광학회지
    • /
    • 제10권1호
    • /
    • pp.53-57
    • /
    • 1999
  • 국재에서 성장 가공시킨 Nd:YAG 결정을 사용한 발진기를 설계제작하였다. 이로부터 발진동작, Q-스위칭, 출력광속의 위상파면 등을 조사하였으며, 다음으로 단일 경로 이득을 측정하였다. 츨력경의 반사율의 변화에 따르는 문턱 입력에너지를 결정하고 이로부터 단일 경로 이득을 계산하였다. 한편 레이저와 발진기 증폭기를 사용하는 보편적인 방법에 의하여 단일 경로 이득을 측정하여 비교 검증하였다. Q-스위칭 레이칭 레이저 최대출력은 1.5MW이고, 펄스폭은 30ns이었으며, 문턱 에너지에서 이득은 0.0958 cm-1 이었다. 실험과정에서 똑같은 사양의 외국산 Nd:YAG 결정에 의한 비교실험을 동시에 수행하였으며, 이로부터 국산 레이저 Nd3+:YAG결정의 레이저 발진 특성이 우수함을 확신할 수 있었다.

  • PDF

초음속 터빈의 축방향 간격에 따른 유동 특성에 대한 실험적 연구 (An experimental study on the flow characteristics of a supersonic turbine as the axial gap)

  • 조종재;김귀순;김진한;정은환
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2005년도 제25회 추계학술대회논문집
    • /
    • pp.100-105
    • /
    • 2005
  • 본 연구에서는 초음속 충동형 터빈의 유동특성을 알아보기 위해 소형 초음속 풍동을 설계하였으며 Single pass Schlieren system을 이용하여 유동을 가시화하였다. 실험은 2차원 초음속 노즐과 익렬을 조합하여 노즐-익렬 간극에 따라 실시하였다. 실험을 통해 유동을 가시화하고 익렬 내부의 압력을 측정하였다. 그리고 이를 통해 충격파를 포함한 복잡한 유동 형태와 노즐-익렬, 충격파-경계층 상호작용 등, 초음속 충동형 터빈의 유동측성을 관찰할 수 있었다.

  • PDF

Impact of Micellar Vehicles on in situ Intestinal Absorption Properties of Beta-Lapachone in Rats

  • Jang, Soung Baek;Kim, Dongju;Kim, Seong Yeon;Park, Changhee;Jeong, Ji Hoon;Kuh, Hyo-Jeong;Lee, Jaehwi
    • The Korean Journal of Physiology and Pharmacology
    • /
    • 제17권1호
    • /
    • pp.9-13
    • /
    • 2013
  • The aim of the present study was to examine the effect of micellar systems on the absorption of beta-lapachone (b-lap) through different intestinal segments using a single-pass rat intestinal perfusion technique. B-lap was solubilized in mixed micelles composed of phosphatidylcholine and sodium deoxycholate, and in sodium lauryl sulfate (SLS)-based conventional micelles. Both mixed micelles and SLS micelles improved the in situ permeability of b-lap in all intestinal segments tested although the mixed micellar formulation was more effective in increasing the intestinal absorption of b-lap. The permeability of b-lap was greatest in the large intestinal segments. Compared with SLS micelles, the effective permeability coefficient values measured with mixed micelles were 5- to 23-fold higher depending on the intestinal segment. Our data suggest that b-lap should be delivered to the large intestine using a mixed micellar system for improved absorption.

수동 소자를 이용한 ADSL POTS Splitter의 체계적인 설계 (A Systematical Design of ADSL POTS Splitter Using Passive Devices)

  • 박지만;김진태;소운섭
    • 한국통신학회논문지
    • /
    • 제24권6A호
    • /
    • pp.913-919
    • /
    • 1999
  • ADSL POTS splitter를 설계하기 위한 체계적인 합성 과정을 제안하였다. 이들은 single-ended 인덕터, 균형 인덕터, 그리고 균형 밀결합 변압기 형태의 저역-통과 여파기로 구성된다. 이 3개의 저역-통과 여파기를 시뮬레이션한 결과, 주파수 특성이 일치함을 보여준다. ADSL 시스템에 적용하기 위해, 상업용 균형 밀결합 변압기를 이용하여 POTS splitter를 설계하였다. 그것을 실험한 결과, ADSL 시스템에서 POTS splitter가 0.2 kHz에서 3.4kHz까지의 주파수 범위에서(또는 음성 대역 주파수에서) $\pm$0.5dB보다 작은 리플 데시벨과 0.6 kHz에서 3.2kHz까지의 주파수 범위에서 130 $\mu\textrm{s}$보다 작은 지연 왜곡을 가진다는 것을 알았다.

  • PDF

초음속 터번 익렬 앞전 형상 및 노즐-익렬 간격에 따른 유동 특성에 대한 실험적 연구 (An Experimental Study on the flow Characteristics of a Supersonic Turbine Cascade as the Leading Edge Shape and the Nozzle-Cascade Cap)

  • 조종재;김귀순;김진한;정은환;정호경
    • 한국추진공학회지
    • /
    • 제9권4호
    • /
    • pp.66-72
    • /
    • 2005
  • 본 연구에서는 초음속 충동형 터빈의 유동특성을 알아보기 위해 소형 초음속 풍동을 설계하였으며 Single pass Schlieren system을 이용하여 유동을 가시화하였다. 실험은 2차원 초음속 노즐과 익렬을 조합하여 블레이드 앞전 형상과 노즐-익렬 간극에 따라 실시하였다. 실험을 통해 충격파를 포함한 복잡한 유동 형태와 노즐-익렬, 충격파-경계층 상호작용 등을 관찰할 수 있었다.