• Tunnel and Underground Space
• /
• v.20 no.4
• /
• pp.292-298
• /
• 2010

The purpose of this study is to evaluate an effect of ground vibration caused by blasting on the concrete brick structure. For the purpose, dynamic response time-history of the structure assumed single degree of freedom (SDOF) system and vibration time-history directly measured from the structure were examined, using Newmark $\beta$ method based on data measured at ground. The time-history was interpreted from the measured data of ground and structure in single hole blasting. Vibration magnitude between ground vibration and structure in single hole blasting and 20 ms interval blasting was about three times and was shown larger vibration on the structure. By time-history analysis of structure dynamic response, the value was almost the same one with the data measured from the structure. It indicates that the vibration characteristics of structures may be predicted on the basis of the ground vibration data measured from the sub-ground of structure.

• Korean Journal of Crystallography
• /
• v.1 no.1
• /
• pp.19-28
• /
• 1990

6H-SiC is a promising material (Eg=3.0eV) for blue light-emitting doide and high-temperature semiconducting device. In the experiment, single crystals of a-SiC have been grown by the sublimation method to fabricate blue light~emitting diode. During the growth of a-SiC single crystals, a temperature Vadient, yonh temperature and pressure ranges were kept 44℃/cm , 1800-1990℃ and 50-1000 mTorr, respectively. Single crystals obtained in Acheson furnace were used as seed crystals. Polarizing microscopy and back-reflection X-ray Laue diffraction showed that the a-SiC crystal was epitaxially and on the seed crytal. It was found by XRD analysis that when other growth conditions were the same, a-SiC was grown at the temperature above 1840℃ and 3C-SiC was gown at lower temperature or under low supersaturation of vapor. The carrier type. concentration and mobility were measured be hole(p-type), 7.6x1014cm-3 and 19cm2V-1sec-1, respectively, by van der Pauw method.

• Journal of KIISE:Information Networking
• /
• v.35 no.4
• /
• pp.268-281
• /
• 2008

It is difficult to construct streaming services based on the overlay networks without any loss of scalability. DONet is one of the most representative streaming overlay network protocols without managing any specific structure. Since DONet does not support the nodes on private networks, it can be considered that the performance of the overlay is not the best. Hole Punching is one of the famous techniques participating the nodes on private networks to streaming overlay networks by using a rendezvous server. However, using only a single rendezvous server cannot be suggested in P2P environment, because it can cause problems in terms of scalability and so on. In this paper, we propose DONet-p, an extension of DONet with Distributed Hole Punching techniques. It supports the nodes on private networks without toss of scalability. The experimental results show the better performance and scalability than DONet with a minimum overhead for additional control messages.

• Steel and Composite Structures
• /
• v.27 no.3
• /
• pp.389-399
• /
• 2018

A perforated shear connector group is commonly used to transfer shear in steel-concrete composite structures when the traditional shear stud connection is not strong enough. The multi-hole perforated shear connector demonstrates a more complicated behavior than the single connector. The internal force distribution in a specific multi-hole perforated shear connector group has not been thoroughly studied. This study focuses on the load-carrying capacity and shear force distribution of multi-hole perforated shear connectors in steel-concrete composite structures. ANSYS is used to develop a three-dimensional finite element model to simulate the behavior of multi-hole perforated connectors. Material and geometric nonlinearities are considered in the model to identify the failure modes, ultimate strength, and load-slip behavior of the connection. A three-layer model is introduced and a closed-form solution for the shear force distribution is developed to facilitate design calculations. The shear force distribution curve of the multi-hole shear connector is catenary, and the efficiency coefficient must be considered in different limit states.

• Journal of Korea Multimedia Society
• /
• v.6 no.2
• /
• pp.360-373
• /
• 2003

The Meta Search system proposed in this paper is operated based on relevance distribution Infer mation(RDI). It first evaluates the sources applicable to the search, and then selects the most appropriate source. According to the evaluation of the sources, it discreetly collects the documents from the concerned sources and classifies them into a useful order based on the RDI, which is an evaluation score of the sources. The documents are classified into order and presented to the user as a single search result. For this Purpose, this study presents evaluation factor models to present the RDI between the query, and source, and proposes a method for drawing out the RDI based on the evaluation factors. The system for selecting the most appropriate sources according to the query has been developed based on an algorithm that selects the best source. Finally, after searching the documents suitable for query from extracted sources, we present a Meta Search system, HoleInOne, that ranks and merges them.

• Journal of the Society of Naval Architects of Korea
• /
• v.49 no.2
• /
• pp.189-195
• /
• 2012

The ice trials of the first Korean icebreaking research vessel "ARAON" were performed at the Arctic Ocean in July-August 2010. The sea ice concentrations of Arctic Ocean were 4/10 to 10/10 and the range of sea ice thickness was roughly 1.0 to 3.5m. In this research, sea ice thickness characteristics at the old ice floes were determined from results of drill hole and apparent conductivity measurements. Especially we measured apparent conductivity using an electromagnetic induction instrument (EM31-MK2) and estimated the sea ice thickness through the empirical equation from Cold Regions Research & Engineering Laboratory, CRREL. The results of estimated sea ice thickness were compared to drill hole measurement results and then, we suggest the new empirical equation to estimate sea ice thickness of single layer type sea ice during the summer season of Arctic Ocean by curve fitting approach to these data.

• Tunnel and Underground Space
• /
• v.17 no.6
• /
• pp.484-492
• /
• 2007

The blasting vibration prediction in the country is mainly carried out by using the scaled distance method. But, this method needs a real-scale test blasting. The blasting vibration prediction has been performed using the data measured at borehole blasting for the purpose of a geological investigation before beginning a construction of a tunnel. In this prediction method, it is difficult to reflect the propagation characteristics of ground vibration generated from a real-scale blasting. propagation. This paper presents a new method for estimating blasting vibration by using superposed data of single hole blasting waveform with a delay time.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.71.1-71.1
• /
• 2014

The black hole occupation fraction in dwarf galaxies can provide an important clue for understanding the black hole seed formation. As a pilot feasibility study, we performed a KVN radio monitoring campaign over 8 months for 4 dwarf galaxies. Two galaxies (IC10 and NGC1569) are detected at 22 GHz, respectively with 39 mJy, 83 mJy. The measured flux (rms) variability is 13% and 8%, respectively for IC10 and NGC1569, while the mean flux uncertainty is 25% and 12%. Thus, the detection of the radio flux variability is at best marginal. Detecting flux variability of faint sources (i.e., 22 GHz flux < 200 mJy) seems challenging with the KVN single dishes. Combining with the 1.4 GHz flux measurements from the NVSS, we find that these two galaxies have a steep spectrum, supporting that the radio sources are AGNs. Instead of a monitoring, single-epoch multi-band observations can be effective for identifying radio AGNs by providing the constraint of the radio continuum slope.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.61.1-61.1
• /
• 2016

Black hole (BH) mass is a fundamental quantity to understand BH growth, galaxy evolution, and connection between them. Thus, obtaining accurate and precise BH mass estimates over cosmic time is of paramount importance. The rest-frame UV CIV ${\lambda}1549$ broad emission line is commonly used for BH mass estimates in high-redshift AGNs (i.e., $2{\leq}z{\leq}5$) when single-epoch (SE) optical spectra are available. Achieving correct and accurate calibration for CIV-based SE BH mass estimators against the most reliable reverberation-mapping based BH mass estimates is thus practically important and still useful. By performing multi-component spectral decomposition analysis to obtained high-quality HST UV spectra for the updated sample of local reverberation-mapped AGNs including new HST STIS observations, CIV emission line widths and continuum luminosities are consistently measured. Using a Bayesian hierarchical model with MCMC sampling based on Hamiltonian Monte Carlo algorithm (Stan NUTS), we provide the most consistent and accurate calibration of CIV-based BH mass estimators for the three line width characterizations, i.e., full width at half maximum (FWHM), line dispersion (${\sigma}_{line}$), and mean absolute deviation (MAD), in the extended BH mass dynamic range of log $M_{BH}/M_{\odot}=6.5-9.1$.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.6
• /
• pp.467-474
• /
• 2005

The expanded multi-Gaussian beam model has recently been developed that can calculate the radiation beam field from a single, rectangular transducer with great computational efficiency. In this study, this model is adopted to calculate the radiation beam field for a phased array transducer with various time delays to achieve steering and/or focusing. The calculation beam fields are compared to those obtained by well known Rayleigh-Sommerfeld integral that provides the exact solution in order to explore the validity of the expanded multi-Gaussian beam model And then, this study proposes a complete ultrasonic measurement model including the expanded beam model, far-field scattering model and system efficiency, Using the proposed model, phased array ultrasonic testing signals for a flat-bottomed hole with/without focusing were performed.