• Journal of the Korean Ceramic Society
• /
• v.30 no.12
• /
• pp.1066-1070
• /
• 1993

When looked upon as a polycrystalline, ceramics have two basic differences from a single crystal. One is that there exist grain boundaries, the other is that the crystal axes of each small crystal are arranged in random directions. But the crystal axes fo small crystals which compose ceramics may be made to have the tendency of being arranged in a specific direction. This is called that the crystal axes are oriented. The degree of the direction arrangement of the crystal axes is called orientation. In order to orient the crystal axes effectively, the fiberous barium titanates were made through KDC method and the ion exchange method. And then they were arranged through pressing, doctor blade, and syringe. As the result of Lotgering evaluation, the sample oriented through syringe showed the highest orientation. After sintering, though the most particles that had been fiberous shaped became global shape viewed through SEM, the orientation of the crystals was reinforced by means of sintering.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.7
• /
• pp.115-121
• /
• 1996

Multi-axes driving system is more suitable for FMS(Flexible Manufacturing System) compared with a conventional single-azis driving system. It has some merits such as flexibility in operation, improvement of net working rate, maintenance free because of no gear train, etc. However, studies on position synchronous control for high precision in the multi-axes driving system are not enough. In this paper, a new method of position synchronous control is suggested in order to apply to the multi- axes driving system. The proposed method is structured very simply using speed and position controller based on PID control law. Especially, the position controller is designed to keep position error to minimize by controlling either speed of two motors. The effectiveness of the proposed method is successfully confirmed through several experiments.

• Structural Engineering and Mechanics
• /
• v.53 no.5
• /
• pp.957-979
• /
• 2015

The present paper investigates the influence of the orientation of the ground-motion reference axes, the seismic incident angle and the seismic intensity level on the inelastic response of asymmetric reinforced concrete buildings. A single storey asymmetric building is analyzed by nonlinear dynamic analyses under twenty bi-directional ground motions. The analyses are performed for many angles of incidence and four seismic intensity levels. Moreover three different pairs of the horizontal accelerograms corresponding to the input seismic motion are considered: a) the recorded accelerograms, b) the corresponding uncorrelated accelerograms, and c) the completely correlated accelerograms. The nonlinear response is evaluated by the overall structural damage index. The results of this study demonstrate that the inelastic seismic response depends on the orientation of the ground-motion reference axes, since the three individual pairs of accelerograms corresponding to the same ground motion (recorded, uncorrelated and completely correlated) can cause different structural damage level for the same incident angle. Furthermore, the use of the recorded accelerograms as seismic input does not always lead to the critical case of study. It is also shown that there is not a particular seismic incident angle or range of angles that leads to the maximum values of damage index regardless of the seismic intensity level or the ground-motion reference axes.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.1
• /
• pp.35-42
• /
• 1998

This paper presents the introduction of Pseudo-2 axes robot module and its GA-based fuzzy control implementation. Pseudo-2 axes robot module which use a single motor and controller for driving 2 joints of a robot mechanism, is devised towards a lower priced robot with its degree of freedom maintained GA-based Fuzzy controller is considered for the better control implementation of the developed system than the conventional PID controller. Here. the scaling factors of the membership function with high fitness values are selected using a genetic algorithm for a pulse-type input trajectory. The obtained controller also shows better trajectory tracking performance than a PID controller.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2003.12a
• /
• pp.177-181
• /
• 2003

This paper presents a 3-axis fine positioning stage. All the procedure concerning the design and fabrication of the stage are described. The stage considered here is composed of flexure hinges, piezoelectric actuators and their peripherals. A special flexure hinge is adopted to be able to actuate the single stage in three axes at the same time. A ball contact mechanism is introduced into the piezoelectric actuator to avoid the cross talk among the axes. The final design is obtained with the theoretical analysis on the stage. An actual fine stage is developed and the design specifications are verified through an experiment.

• Radiation Oncology Journal
• /
• v.6 no.2
• /
• pp.277-281
• /
• 1988

Although widely used in external beam treatment planning, computed tomography scans are infrequent in incranial tumors by implanting of Radioactive isotope. This incranial brachytherapy has only become possible by using CT scans and stereotaxic operation methods. The coincidence of single source and tumor axes in brachytherapy is very important to determine the therapeutic dosages. Eventhough using the CT scan, according to spatial location of tumor tying, the section of tumor will be seen enlargement, cause the tumor will be cut off with slight angle to its axes. Correct analysis of tumor size from source is required for rotated axes in analytical geometry.

• 한국초전도학회:학술대회논문집
• /
• v.10
• /
• pp.86-91
• /
• 2000

Ni tapes were textured by taking advantage of their secondary recrystallization. The obtained 18cm long tapes had textures of single crystalline qualities with their [001] axes tilted with respect to the surface and their [010] axes parallel to the rolling direction. YBCO/CeO$_2$/YSZ/CeO$_2$ films grown on the Ni tape had the same crystalline orientations. Magnetic field dependent I-V relations were measured on a 5cm section of the tape. Jc defined by 1mV criterion was 1.5 ${\times}$ 10$^5$A/cm$^2$ at 77K under zero field and was reduced by ${\sim}$50% under the applied magnetic field of 5T.

• Progress in Superconductivity
• /
• v.2 no.1
• /
• pp.33-38
• /
• 2000

Ni tapes were textured by taking advantage of their secondary recrystallization. The obtained 18cm long tapes had textures of single crystalline qualities with their [001] axes tilted with respect to the surface and their [010] axes parallel to the rolling direction. The reproducibility of this texturing was checked by taking statistics on the crystal orientations of 24 Ni tapes. $YBCO/CeO_2/YSZ/CeO_2$ films grown on the Ni tape had the same crystalline orientations. Magnetic field dependent I-V relations were measured on a 5cm section of the tape. $J_c$ defined by $20{\mu}V/mm$ criterion was $1.5\times10^5A/cm^2$ at 77K under zero field and was reduced by $\sim$50% under the applied magnetic field of 5T.

• Korean Journal of Crystallography
• /
• v.11 no.1
• /
• pp.16-21
• /
• 2000

(Yb/sub x/Y/sub 1-x/)Ca₄O(BO₃)₃ single crystals where x=0.3,8,15,20% were grown by Czochralski Method. The crystals grown under the optimum conditions were transparent and colorless with good crystal form. Using polarizing microscope, crystal defects such as parasite crystals and bubbles were detected depending on the composition of melts and pulling rates. The optimum growth parameters for high quality of single crystals were 15∼20 rpm of rotation rate and 2mm/h of pulling rate at the flow rate of 2 l/min of Nitrogen gas. The relationship between crystal axes and optical axes was investigated by optical crystallographic method, polarization technique and single crystal X-ray method. From the spectroscopic measurements, it was confirmed that there were strong absorption bands at 900 and 976.4 nm and strong emission band at 976.4 nm in Yb/sup 3+/ ion doped YCa₄O(BO₃)₃ crystal. For the application of second harmonic generation of 1.064 ㎛ laser, non-linear optical devices with θ=32.32° and Ψ=0°, λ/10 of flatness and the size of 6x8x5.73 mm were fabricated from the grown YCa₄O(BO₃)₃ crystal.

• Korean Journal of Optics and Photonics
• /
• v.9 no.6
• /
• pp.403-407
• /
• 1998

The polarizatin properties of an internal-mirror 543 nm He-Ne laser with and without a transverse magnetic field were investigated for single-mode operation. Two orthogonal eigenpolarizations field to the natural tube axes of laser were observed when the emitted laser output was linearly polarized. Polarization unstability between these polarizations occurred when the applying a 500 gauss transverse magnetic field at 35$^{\circ}$ with respect to the natural tube axes of laser. Under such conditions stable single-mode operation which is useful for the frequency stabilization of a 543 He-Ne laser to $I_2$-saturated absorptions was obtained in the tuning range of 880 MHz.