• Journal of Information Technology Applications and Management
• /
• v.18 no.4
• /
• pp.81-93
• /
• 2011

By using GOSST theory, this paper models SSCFLP taking FLP, capacity of the facilities, single source capacitated limitation level and service enhancement issues into consideration. GOSST theory is strongly suggested as the solution procedure for these issues. We have used clustering of Center of Gravity method using the case study of the company S and then, took a heuristic GOSST measure in the alternative selection process. As a result, the research finds an alternative solution that both meets the satisfactory level of service and achieves consistent distribution capacity. When using this modeling, especially, to select the location of the logistics distribution center, the efficiency of current facilities is maximized while offering the minimum geometric distance for the alternative. Also, we can expect that the illustrated model and alternative solution can be applied to architecture of distribution system, to selection of telecommunication system locations for wireless network and to relocation of related facilities due to their sensitivities to location and weight.

• Polymer(Korea)
• /
• v.34 no.5
• /
• pp.415-423
• /
• 2010

Poly(vinyl alcohol)(PVA) with high degree of hydrolysis of above 98% was dissolved in dimethyl sulfoxide(DMSO), and the shear viscosity was measured up to $C{\simeq}0.14\;g/mL$ in the semi-dilute solution regime. Next, as probe particle, polystyrene(PS) latex was introduced into this matrix system and its delayed diffusion due to polymer concentration was investigated by means of dynamic light scattering. When the solution viscosity of PVA/DMSO was plotted against the reduced concentration $C[{\eta}]$, which is scaled by the intrinsic viscosity, the molecular weight dependence was strongly appeared at C$[{\eta}]$ >2. Some heterogeneties in polymer solution were considered as its source. Contrary, the diffusion of probe particle in the matrix solution was observed as a single mode motion at whole concentration range but its ratio of its diffusion coefficient at solution to that at solvent, D/Do did not show any molecular weight dependence at all. However, the application limit of the stretched exponential function was disclosed at C$[{\eta}]$ >2.5.

• Journal of the Korean Ceramic Society
• /
• v.48 no.3
• /
• pp.246-250
• /
• 2011

Effects on sintering and electrical properties of $La_{0.7}Ca_{0.3}Cr_{0.9}Co_{0.1}O_{3-{\delta}}$ system, a interconnect material for cylindrical and flat tubular solid oxide fuel cells (SOFC), have been investigated by Ca-source when using $CaCO_3$ and $CaF_2$. When using $CaCO_3$ and $CaF_2$ was mixing as Ca-source, single phased perovskite solid solution was observed for each sample. The sintering temperature was decreased by $CaF_2$ contents was increased. When using 0.1 mole $CaF_2$ was densely sintered at $1400^{\circ}C$ and relative density was 93.8%. Also, electrical conductivity in oxidation and reducing atmosphere was 47, 4.3 S/cm, respectively, due to $F^-$ ion enhance the electrical conductivity in reducing atmosphere.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.5
• /
• pp.53-60
• /
• 2002

This paper presents exact autotransformer-fed AC electric railroad system modeling using constant current mode, and single-phase STATCOM(Static Synchronous Compensator) which has an effect on electric railroad system. An AC electric railroad is rapidly changing single-phase feeding electric power. To avoid voltage fluctuation under single phase loads, electric power should be received from a large source. The system modeling theory is based on the solution of algebraic. The AC electric railroad load model is nonlinear. Therefore this paper is considered nonlinear load using PSCAD/EMTDC. And the proposed modeling method is considered the line self-impedances and mutual-impedances that techniques for the AC electric railroad system modeling analysis, and that single-phase STATCOM can reliably compensate the voltage drop. In the case study, the allowance range of feeding voltage is 22.5∼27.5 kV, AT-fed AC electric railroad system circuit is analyzed by loop equation both normal and extension modes. The simulation objectives are to calculate the catenary and rail voltages with respect to ground, as the train moves along a section of line between two adjacent ATs. The results show that single-phase STATCOM can reduce the voltage drop in the feeding circuit and improve the power quality at AC electric railroad system by compensating the reactive power.

• The Journal of Engineering Geology
• /
• v.34 no.2
• /
• pp.173-191
• /
• 2024

Landslides pose significant threats to many countries globally, yet the development and implementation of effective landslide early warning systems (LEWS) remain challenging due to multifaceted complexities spanning scientific, technological, and political domains. Addressing these challenges demands a holistic approach. Technologically, integrating thresholds, such as rainfall thresholds, with real-time data within accessible, open-source software stands as a promising solution for LEWS. This article introduces LandScient_EWS, a PHP-based program tailored to address this need. The software facilitates the comparison of real-time measured data, such as rainfall, with predefined landslide thresholds, enabling precise calculations and graphical representation of real-time landslide advisory levels across diverse spatial scales, including regional, basin, and hillslope levels. To illustrate its efficacy, the program was applied to a case study in Medellin, Colombia, where a rainfall event on August 26, 2008, triggered a shallow landslide. Through pre-defined rainfall intensity and duration thresholds, the software simulated advisory levels during the recorded rainfall event, utilizing data from a rain gauge positioned within a small watershed and a single grid cell (representing a hillslope) within that watershed. By identifying critical conditions that may lead to landslides in real-time scenarios, LandScient_EWS offers a new paradigm for assessing and responding to landslide hazards, thereby improving the efficiency and effectiveness of LEWS. The findings underscore the software's potential to streamline the integration of rainfall thresholds into both existing and future landslide early warning systems.

• Journal of Microbiology and Biotechnology
• /
• v.33 no.4
• /
• pp.419-429
• /
• 2023

Ultraviolet C (UV-C, 200-280 nm) light has germicidal properties that inactivate a wide range of pathogenic and spoilage microorganisms. UV-C has been extensively studied as an alternative to thermal decontamination of fruit juices. Recent studies suggest that the efficacy of UV-C irradiation in reducing microorganisms in fruit juices is greatly dependent on the characteristics of the target microorganisms, juice matrices, and parameters of the UV-C treatment procedure, such as equipment and processing. Based on evidence from recent studies, this review describes how the characteristics of target microorganisms (e.g., type of microorganism/strain, acid adaptation, physiological states, single/composite inoculum, spore, etc.) and fruit juice matrices (e.g., UV absorbance, UV transmittance, turbidity, soluble solid content, pH, color, etc.) affect the efficacy of UV-C. We also discuss the influences on UV-C treatment efficacy of parameters, including UV-C light source, reactor conditions (e.g., continuous/batch, size, thickness, volume, diameter, outer case, configuration/arrangement), pumping/flow system conditions (e.g., sample flow rate and pattern, sample residence time, number of cycles), homogenization conditions (e.g., continuous flow/recirculation, stirring, mixing), and cleaning capability of the reactor. The collective facts indicate the immense potential of UV-C irradiation in the fruit juice industry. Existing drawbacks need to be addressed in future studies before the technique is applicable at the industrial scale.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.5
• /
• pp.119-126
• /
• 2016

Software maintenance becomes extremely difficult, especially caused by multiple versions in project-based or customer-oriented software development methodology. For reducing the maintenance cost, reengineering to software product line can be a solution to the software which either is a family of products nevertheless little different functionalities or are customized for each different customer's requirement. At an initial stage of the reengineering, the most important activity in software product line is feature extraction with respect to commonality and variability from the existing system due to verifying functional coverage. Several researchers have studied to extract features. They considered only a single version in a single product. However, this is an obstacle to classify the commonality and variability of features. Therefore, we propose a method for systematically extracting features from source code and its change history considering several versions of the existing system. It enables us to represent functionalities reflecting developer's intention, and to clarify the rationale of variation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.4
• /
• pp.671-690
• /
• 2010

The continuous growth of attacks in the Internet causes to generate a number of rules in security devices such as Intrusion Prevention Systems, firewalls, etc. Policy anomalies in security devices create security holes and prevent the system from determining quickly whether allow or deny a packet. Policy anomalies exist among the rules in multiple security devices as well as in a single security device. The solution for policy anomalies requires complex and complicated algorithms. In this paper, we propose a new method to remove policy anomalies in a single security device and avoid policy anomalies among the rules in distributed security devices. The proposed method classifies rules according to traffic direction and checks policy anomalies in each device. It is unnecessary to compare the rules for outgoing traffic with the rules for incoming traffic. Therefore, classifying rules by in-out traffic, the proposed method can reduce the number of rules to be compared up to a half. Instead of detecting policy anomalies in distributed security devices, one adopts the rules from others for avoiding anomaly. After removing policy anomalies in each device, other firewalls can keep the policy consistency without anomalies by adopting the rules of a trusted firewall. In addition, it blocks unnecessary traffic because a source side sends as much traffic as the destination side accepts. Also we explain another policy anomaly which can be found under a connection-oriented communication protocol.

• Progress in Superconductivity
• /
• v.3 no.1
• /
• pp.120-124
• /
• 2001

To establish the deposition condition of YBCO thin film on MgO single crystal substrates, processing parameters of deposition temperature, chemical composition and oxygen partial pressure were controlled. When using a Ba-deficient composition of YB $a_{1.8}$ $Cu_3$$O_{x}$, non-superconducting phase like CuO, $CuYO_2$ were formed, but BaCu02 was formed together with Yl23 phase when the starting composition was Ba-rich ($YBa_{2.3}$ $Cu_3$ $O_{x}$). The epitaxially grown Yl23 phase was formed at 760-$810^{\circ}C$ and $P_{O2}$=0.29-0.91 Torr.r.r.r.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.235-242
• /
• 1998

This study aims to detect and to reduce the multipath errors which are main errors source in high precious surveying such as GPS-aided aerial triangulation and Car Navigation. which reference receivers being fixed, when kinematic receivers move continuously, multipath is performed using smoothed code measurement and pure code measurement in the network. Through this methods, 3D RMS errors are reduced into about 30% in the single differential code solution to the kinematic receiver. This is based on the fact that the network adjustment are performed at multiple reference receivers, but positioning is carried out by the single differential methods between a reference receiver and a kinematic receiver. So it was supposed that this methods reduced the correlation errors including the atmospheric errors using the nearest receivers and can be mixed with another methods.