• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.4
• /
• pp.321-329
• /
• 1999

The effect of water deficits on soybean [Glycine max (L.) Merr.] could appear on seed quality through changes of morphological plant characteristics. Two Korean genotypes, Hwangkeum (determinate growth habit) and Muhan (indeterminate growth habit), were used to examine the influences of treatment stage and method of water deficit during reproductive growth period on yield and seed quality of soybean. Water deficit at R5 or R6 stages was as damaging to seed quality as double water-deficit treatments at R2+R5 or R2+R6. However, seed from double water-deficit treatment tended to have lower oxidation-reduction potential compare to the corresponding single water-deficit treatment. In comparison with Muhan, Hwangkeum had significantly greater oxidation-reduction potential value. Seed yield per plant in both genotypes depended greatly on seed yield of branches. However, the proportion of number of branch seed to total seed umber in Hwangkeum was increased as the water deficit was applied during later reproductive stage, whereas, in Muhan the proportion was lower. Water-deficit treatments including the single and double water-deficit treatments and non-stressed treatment were able to be classified into five groups for Hwangkeum and four groups for Muhan based on the influences on yield components, number of pod, number of seed, and single seed weight, using principal component analysis. In both genotypes, R2+R5 water-deficit treatment decreased number of pod and seed, but increased single seed weight. On the contrary, R6 or R2+R6 stress increased the pod and seed number, but decreased single seed weight.

• Progress in Superconductivity and Cryogenics
• /
• v.19 no.2
• /
• pp.9-13
• /
• 2017

This study presents a simple method to control the seed orientation which leads to the various growth characteristics of a single grain REBCO (RE: rare-earth elements) bulk superconductors. Seed orientation was varied systematically from c-axis to a-axis with every 30 degree rotation around b-axis. Orientations of a REBCO single grain was successfully controlled by placing the seed with various angles on the prismatic indent prepared on the surface of REBCO powder compacts. Growth pattern was changed from cubic to rectangular when the seed orientation normal to compact surface was varied from c-axis to a-axis. Macroscopic shape change has been explained by the variation of the wetting angle of un-reacted melt depending on the interface energy between $YBa_2Cu_3O_{7-y}$ (Y123) grain and melt. Higher magnetic levitation force was obtained for the specimen prepared using tilted seed with an angle of 30 degree rotation around b-axis.

• Progress in Superconductivity and Cryogenics
• /
• v.24 no.3
• /
• pp.35-40
• /
• 2022

To fabricate large grain YBCO bulk superconductors by melt process, Sm123 single crystal with a high melting point are mostly used as seeds. However, it also uses Y123 film deposited on MgO single crystal substrate. This study investigated the growth behavior of the Y123 grain during a melt process when single grain YBCO bulk was used as a seed. Single grain Y123 bulk was grown when the seed size was small. When the seed size was relatively large, multiple grains were grown but the grains were still large. Y123 seed crystal was completely decomposed during high temperature anneal at 1040℃ and new Y123 crystals were nucleated during a slow cooling stage below a peritectic temperature. Thereafter, newly formed Y123 crystals from the seed area are thought to grow into the Y1.8 powder compact. The crystallographic orientations of newly nucleated Y123 grains are independent of the crystallographic orientation of Y123 seed. It is thought that the crystallographic orientation of newly nucleated Y123 crystal can be controlled by using Y211-free Y123 single crystal as a seed of homo-seeding melt growth.

• Korean Journal of Plant Taxonomy
• /
• v.41 no.2
• /
• pp.103-107
• /
• 2011

The seed characteristics of Withania somnifera were studied using light and scanning electron microscopy in order to determine the specific features of this species. The seed color is yellow, and the seed shape is reniform measuring between two to three millimeters. The seed of W. somnifera is exarillate and albuminous. The seed coat type is exotestal. The seed coat develops from a single integument. The young seed coat consists of single-layered exotesta, multi-layered mesotesta and single-layered endotesta. However, parenchymatous mesotesta layers are completely compressed at maturity. Therefore, the seed coat was represented by sclerenchymatous exotesta. The primary sculpture on the seed surface is reticulate, and cells are irregular in shape with undulating anticlinal walls. In addition, the seed surface has several characteristic holes between the anticlinal walls.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.232-232
• /
• 2006

SiC single crystal Ingots were prepared onto different seed material using sublimation PVT techniques and then their crystal quality was systematically compared. In this study, the conventional SiC seed material and the new SiC seed material with an inserted SiC epitaxial layer on a seed surface were used as a seed for SiC bulk growth. The inserted epitaxial layer was grown by a sublimation epitaxy method called the CST with a low growth rate of $2{\mu}m/h$ N-type 2"-SIC single crystals exhibiting the polytype of 6H-SiC were successfully fabricated and carrier concentration levels of below $10^{17}/cm^3$ were determined from the absorption spectrum and Hall measurements. The slightly higher growth rate and carrier concentration were obtained in SiC single crystal Ingot grown on new SiC Seed materials with the inserted epitaxial layer on the seed surface, maintaining the high quality.

• Progress in Superconductivity and Cryogenics
• /
• v.1 no.1
• /
• pp.1-6
• /
• 1999

The microstructures of top seed mult processde $\textrm{YBa}_2\textrm{Cu}_3\textrm{O}_7$.$\delta$ single crystal were studied. Although shape of the seed was not faceted. the growth shape of Y123 single crystal was faceted. It was observed that Y211 phases were trapped in specific spaces of the faceted region. From the microstructural investigation. it was suggested that the segregation of Y211 is due to the difference of growth rates in crystal direction. When a single crystal was grown by the single seed with stepped multi surfaces. a microstrue was grown from multi-seed. The microstructure show the possibility of multi-seed growth. Corn kernel like structure without Y211 phase was observed and seemed to be formed by the diffusion reaction between Y211 phase in crystal and liquid wetted on the crystal. the diagonal line on Y123 crystal was observed that it was formed by the corn kernel like structure.

• Progress in Superconductivity and Cryogenics
• /
• v.19 no.3
• /
• pp.33-39
• /
• 2017

This study presents that the orientation and the geometry of seed affect on the growth behavior of melt processed single grain REBCO bulk superconductor and its magnetic properties. The effects of seed geometry have been investigated for thin $30mm{\times}30mm$ rectangular powder compacts. Single grain REBCO bulk superconductors have been grown successfully by a top seed melt growth method for 8-mm thick vertical thin REBCO slab. Asymmetric structures have been developed at the front surface and at the rear surface of the specimen. Higher magnetic properties have been obtained for the specimen that c-axis is normal to the specimen surface. The relationships between microstructure, grain growth and magnetic properties have been discussed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.spc
• /
• pp.78-83
• /
• 2008

Soybean [Glycine max (L.)] is a major source of protein for human and animal feed. Inter- and intra-genotype variation of soybean protein has been investigated by soybean researchers. However, limited sample amount of soybean single seed there is no report that investigated intra-plant variation of soybean protein within soybean plant. Recently a non-destructive NIR (near-infrared reflectance) spectroscopy using single seed grain to analyze seed protein was developed. The objectives of this study were to understand variation of seed protein content within plant and to determine the amount of minimum sample size which can represent protein content for a soybean plant. Frequency distribution of protein content within plant showed normal distribution. There was an intra-cultivar variation for protein content in soybean cultivar Seonnogkong. Difference of protein content among single plants of Seonnokong was recognized at 5% level. Seeds in lower position on plant stem tended to accumulate more protein than in higher position. There was significant difference for protein content between sample size 5 seeds and sample size of more than 5 seeds (10, 20, 30, 40, and 50 seeds) at a soybean plant with 57 seeds however no difference was recognized among sample size (5, 10, 20, and 30 seeds) at a soybean plant with 33 seeds. Around 20% seeds of soybean from single plant needed to determine the protein content to represent protein content of single soybean plant. This study is the first one to report evidence of intra-plant variation for proteincontent which detected by non-destructive NIR spectroscopy using single seed grain in soybean.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.3
• /
• pp.330-335
• /
• 1987

This study was carried out to know the effect of seed position on the size, contents of ginsenosides, free sugars, and fatty acids in ginseng seeds. Seed positions were classified by the three portions as center, middle and border in a seed cluster. Seed weight at center was light remarkably in comparison with those of seeds of at border and middle. The weight of embryo plus endosperm was in same tendency as seed weight. Percentage of single-seeded berry was smaller than that of the double-seeded, and the triple-seeded was rare. The percentage of the single-seeded increased from the border to the center. Size of the single -seeded seed was smaller than that of the double- seeded. Rate of dehiscence did not differ among different seed positions. The major ginsenosides in seed were Re, Rb$_1$, and Rb$_2$. The contents of Rb$_2$ and total saponin were highest in border, least in center, but reversed in Re and Rd. Major free sugars in seed were sucrose and glucose. The sucrose content was gradually decreased according to the seed position from border to center. Major fatty acids in the seed were oleic and linoleic acid. Contents of palmitic and linolenic acid were different according to the seed position.

• Journal of the Korean Ceramic Society
• /
• v.35 no.8
• /
• pp.878-884
• /
• 1998

Synthesis of high purity mullite from korean resourceful kaolin and water-soluble aluminium salts was in-vestigated by addition of mullite seed. Single phase of mullite was formed at 1350$^{\circ}C$ however its mullite con-tent was 31-33% Maximum content of mullite synthesized from kaoin aluminium nitrate and 8wt% mul-lite seed was 98% at 1600$^{\circ}C$ for 4 hours.