• 제목/요약/키워드: single phase test

검색결과 444건 처리시간 0.027초

Analysis, Design, Modeling, Simulation and Development of Single-Switch AC-DC Converters for Power Factor and Efficiency Improvement

  • Singh, Bhim;Chaturvedi, Ganesh Dutt
    • Journal of Power Electronics
    • /
    • 제8권1호
    • /
    • pp.51-59
    • /
    • 2008
  • This paper addresses several issues concerning the analysis, design, modeling, simulation and development of single-phase, single-switch, power factor corrected AC-DC high frequency switching converter topologies with transformer isolation. A detailed analysis and design is presented for single-switch topologies, namely forward buck, flyback, Cuk, Sepic and Zeta buck-boost converters, with high frequency isolation for discontinuous conduction modes (DCM) of operation. With an awareness of modem design trends towards improved performance, these switching converters are designed for low power rating and low output voltage, typically 20.25W with 13.5V in DCM operation. Laboratory prototypes of the proposed single-switch converters in DCM operation are developed and test results are presented to validate the proposed design and developed model of the system.

인지과제를 결합한 장애물 보행훈련이 뇌졸중 환자의 균형과 보행능력 및 일상생활동작에 미치는 효과 -단일사례연구- (Effect of Obstacle Walking Training Combined with Cognitive Tasks on Balance, Gait, and Activities of Daily Living in Patients with Stroke: A Single Case Study)

  • 송민정;김범룡
    • PNF and Movement
    • /
    • 제21권1호
    • /
    • pp.11-18
    • /
    • 2023
  • Purpose: This study aims to compare the effects of obstacle walking training combined with cognitive tasks on balance, gait, and activities of daily living in patients with stroke. Methods: A single-subject design was used, where one stroke patient participated. Obstacle walking training combined with cognitive tasks was performed for 1 hour per day for a total of 10 times during the intervention phase. The subjects were measured five times in the baseline phase, 10 times in the intervention phase, and five times in the follow-up phase. The outcome measurements included the Berg balance scale (BBS), the 10-meter walk test (10 MWT), and the Korean modified Barthel index (K-MBI). Results: In this study, the results showed that the 10 MWT scores during the intervention period improved and that this improvement remained, even during the post-period. In addition, BBS and K-MBI values for stroke patients increased significantly after training. Conclusion: The results of this study revealed that obstacle walking training combined with cognitive task training may be helpful to improve balance, gait, and activities of daily living in stroke patients. Therefore, obstacle walking training combined with cognitive tasks is recommended for stroke patients.

열 사이클에 따른 고체산화물 연료전지의 기계적 및 전기적 특성 (Mechanical and Electrical Performance of Anode-Supported Solid Oxide Fuel Cells during Thermal Cyclic Operation)

  • 양수용;박재근;이태희;유정대;유영성;박진우
    • 한국세라믹학회지
    • /
    • 제43권12호
    • /
    • pp.775-780
    • /
    • 2006
  • Mechanical and electrical performance of anode-supported SOFC single cells were analyzed after thermal cyclic operation. The experiments of thermal cyclic cell-operation were carried out four times and performance of each cell was measured at different temperatures of 650, 700, and $750^{\circ}C$, respectively. As increasing the number of thermal cycle test, single cells showed poor I-V characteristics and lower 4-point bending strength. The anode polarization was also measured by AC-impedance analysis. The observation of the microstructure of the anodes in single cells proved that the average particle size of Ni decreased and the porosity of anode increased. It is thought that the thermal cycle caused the degradation of performance of single cells by reducing the density of three-phase boundary region.

The Effect of Temperature on Stress Corrosion Cracking of AI Brass under Flow

  • Lim, Uh-Joh;Jeong, Hae-Kyoo
    • Corrosion Science and Technology
    • /
    • 제2권3호
    • /
    • pp.135-140
    • /
    • 2003
  • The effect of temperature on stress corrosion cracking o f Al-brass used in vessel heat exchanger tube was studied in 3.5% NaCI + 0.1% $NH_4OH$ solution. The SCC test using a CDT(constant displacement test) and the specimens using a SEN(single edge notched) specimens. For setting the environment similar to working environment of a heat exchanger, the specimens was immersed in solution and solution flow onto the specimens were performed. The results are as follows : The latent time of stress corrosion crack occurrence gets shorter, as the temperature gets higher. Dezincification phase showed around the crack occupy wider range, as the temperature gets higher. Zn composition falls under 4% at the dezincifiction area.

개량형 단상 혐기성 소화공정에서의 혼합슬러지를 이용한 바이오가스 생산효율 증대방안 연구 (A Study on Increasing the Efficiency of Biogas Production using Mixed Sludge in an Improved Single-Phase Anaerobic Digestion Process)

  • 정종철;정진도;김산
    • 한국산학기술학회논문지
    • /
    • 제17권6호
    • /
    • pp.588-597
    • /
    • 2016
  • 본 연구는 유기성폐기물의 혼합슬러지를 개량형 단상 혐기성 소화공정에서 각각의 혼합비율에 따른 바이오가스 생산효율 향상에 관한 연구로, 연구에 사용된 유기성폐기물의 종류는 하수 생슬러지, 음폐수 및 가축분뇨이다. BMP test를 통해 잠재적 메탄발생량을 확인한 결과 단일시료의 경우 가축분뇨가 $1.55m^3CN4/kgVS$로 가장 높게 평가되었고, 혼합시료(생슬러지, 음폐수, 가축분뇨)의 경우는 각각의 비율을 50% : 30% : 20%로 하였을 때 $0.43m^3CN4/kgVS$로 가장 높게 나타났다. 반면 실증플랜트에서 혼합슬러지 최적 혼합비율은 생슬러지(68.5) : 음폐수(18.0) : 가축분뇨(13.5)로 나타나 BMP test와 다소 상이한 결과를 보였다. 이는 혼합슬러지 성상변화와 체류시간 등 소화조 운전조건 변화에 기인한 결과로 판단되며, 단상 혐기성 소화조의 바이오가스 생산량이 $2,514m^3/d$, 메탄함량 62.8%로 조사되어 설계능력인 바이오가스 생산량 $2,319m^3/d$ 기준으로 볼 때 최대성능을 발휘하는 것으로 평가되었다. 아울러 본 연구를 통해 혐기성 소화방식에 있어 소화조의 안정적인 운영과 소화효율 측면에서 고효율 방식인 2상 소화방식을 도입하는 것이 유리하나 기존의 단상 소화방식에 있어서도 소화효율 개선 및 성능향상이 가능하다는 것을 알 수 있었다.

CAPACITY ANALYSIS OF THE SILVER OXIDE-ZINC CELL (PHASE 2)

  • 이완구
    • 기술사
    • /
    • 제15권1호
    • /
    • pp.36-40
    • /
    • 1982
  • This study is to characterize Ago stability useful for manufacturing silver oxide button cell, and deter mined by test tube gassing evaluations and by cell expansion and further discuss en the effectiveness of pellet reduction treatments to obtain single plateau discharge Profile and relevent performance.

  • PDF

전진 비행시 헬리콥터의 동적 미계수에 관한 연구 (A study on the helicopter dynamic stability derivatives in forward flight)

  • 홍천식;황명신
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
    • /
    • pp.153-158
    • /
    • 1992
  • The purpose of this paper is to calculate the dynamic derivatives of single rotor Helicopter in forward flight. From trim condition, the equation of motion is derived, and we can calculate the dynamic dervatives. The results were compared with flight test data. The phase angle and stick displacement are obtained and compared at the trim condition.

  • PDF

Charaterization of Ginsenosides-induce d Antinociception in Mice

  • Jin-Ju Nah;Seo
    • 고려인삼학회:학술대회논문집
    • /
    • 고려인삼학회 1998년도 Advances in Ginseng Research - Proceedings of the 7th International Symposium on Ginseng -
    • /
    • pp.31-39
    • /
    • 1998
  • We have investigated the antinociceptive efficacy of ginseng saponins in mice using l% formalin, which induce two phases of pain (acute and tonic pains) and is known to induce a clinically related pain. Ginseng total saponins (GTS) relieved both phases of pain with EDso of 162 mghg for acute and 92 mg/kg for tonic pain, respectively. Both protopanaxadiol (PD) and protopanaxatriol (PT) saponins did not attenuated acute phase of pain but relieved tonic phase of pain with EDso of 45 mg/kg for PD saponins and 105 mghg for PT saponins, respectively. Moreover, ginsenoside Rc, Rd, and Re among representative ginsenosides such as Rbl, Rc, Rd, Re and Rgl relieved slightly but significantly acute phase of pain and strongly attenuated tonic phase of pain but Rf relieved only tonic phase of pain. However, PD and PT saponins, and the individual ginsenosides tested except GTS did not greatly attenuate thermal noxious pain (tail-flick test). These results suggest that single ginsenoside or mixture of various ginsenosides mainly induce differential antinociception in mice.

  • PDF

유기 전압비를 이용한 3권선 변압기 보호계전 알고리즘 (A Three-Winding Transformer Protective Relaying Algorithm Based on the Induced Voltages)

  • 강용철;이병은
    • 대한전기학회논문지:전력기술부문A
    • /
    • 제52권3호
    • /
    • pp.173-178
    • /
    • 2003
  • This paper proposes a three-winding transformer protective relaying algorithm based on the ratio of the induced voltages (RIV). The RIV of the two windings is the same as the turn ratio for all operating conditions except an internal fault. For a single phase and a three-phase transformer containing the wye-connected windings, the induced voltages of the windings are estimated. For a three-phase transformer containing the delta-connected windings, the induced voltage differences are estimated using the line currents, because the winding currents are practically unavailable. The algorithm can identify the faulted phase and winding if a fault occurs on one phase of a winding. The test results clearly show that the algorithm successfully discriminates internal winding faults from magnetic inrush. The algorithm not only does not require hysteresis data but also can reduce the operating time of a relay.

Analysis, Design and Development of a Single Switch Flyback Buck-Boost AC-DC Converter for Low Power Battery Charging Applications

  • Singh, Bhim;Chaturvedi, Ganesh Dutt
    • Journal of Power Electronics
    • /
    • 제7권4호
    • /
    • pp.318-327
    • /
    • 2007
  • The design and performance analysis of a power factor corrected (PFC), single-phase, single switch flyback buck-boost ac-dc converter is carried out for low power battery charging applications. The proposed configuration of the flyback buck-boost ac-dc converter consists of only one switch and operates in discontinuous current mode (DCM), resulting in simplicity in design and manufacturing and reduction in input current total harmonic distortion (THD). The design procedure of the flyback buck-boost ac-dc converter is presented for the battery charging application. To verify and investigate the design and performance, a simulation study of the flyback buck-boost converter in DCM is performed using the PSIM6.0 platform. A laboratory prototype of the proposed single switch flyback buck-boost ac-dc converter is developed and test results are presented to validate the design and developed model of the system.