• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.387-390
• /
• 2007

Advanced-MVA(A-MVA) for LCD-TV application was proposed to yield high performance LCD-TV. By utilizing Additional Refresh Technology(ART), which has 2-TFTs but with single source and gate line only. The A-MVA can yield low color washout, fast response, and optimized brightness. AMVA has become the promising solution of advanced LCDTV panels for mass-production.

• 한국항공우주학회지
• /
• 제38권2호
• /
• pp.111-118
• /
• 2010

복합재료 구조물에서 조인트 부위는 매우 취약한 부분이다. 본 논문에서는 후판 알루미늄-알루미늄 조인트 및 복합재-알루미늄 조인트를 접착제로 접합하여 제작한 다음, 인장실험을 수행하여 파손형태를 고찰하였다. 또한, 항복 변형률에 기초한 수정 파손영역 이론을 제안하였으며, 파괴모드별 파손하중과 상호 비교하였다. 후판 알루미늄-알루미늄 조인트와 복합재-알루미늄 조인트의 파손강도를 동일한 파손기준값을 적용하여 예측하였으며, 제작된 14종류의 시편에서는 최대 19.3% 오차범위 내에서 파손강도를 예측할 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.620-620
• /
• 2013

When $MoS_2$ is thinned to single layer (1L), photoluminescence (PL) quantum yield drastically increases due to emergence of direct band gap. A recent theory predicts that the electronic structure of 1L $MoS_2$ is very sensitive to its lattice constants. We investigated the response of 1L $MoS_2$ to biaxial tensile strain using spatially resolved PL and Raman spectroscopy. Changes in the lattice constants were monitored by the Raman frequency of the in-plane ($E^1{_2g}$) mode. Systematic correlations between PL and Ramanspectral features, revealed in the preliminary results, will be further tested with samples on other substrates and against thermal stress. The results will also be discussed in regard to the theory which predicts that 1L $MoS_2$ becomes an indirect semiconductor at small tensile strain and turns metallic when further extended.

• 한국전산구조공학회논문집
• /
• 제36권3호
• /
• pp.185-192
• /
• 2023

본 연구에서는 KBC2022의 풍직각방향 변동풍하중 스펙트럼을 이용하여 풍직각방향 풍하중을 생성하고 생성된 풍직각방향 풍하중이 작용하는 구조물의 비탄성 동적거동을 해석하는 프로그램을 개발하고자 한다. 풍응답은 일차 모드가 탁월하고 소성화에 의한 진동의 변화는 작고, 풍방향 진동과 풍직각방향 진동은 독립적이며, 비틀림 진동의 영향은 작다고 가정한다. 적용 구조물을 수평방향의 단자유도 모델로 가정하고, 구조물의 질량을 집중질량으로 치환하여 상부에 작용시킨다. 비탄성 해석을 위한 이력모델은 이선형 모델을 적용한다. 강성비(𝛼)와 항복점비(𝛽)를 변수로 비탄성 동적응답을 분석한 결과 강성비가 일정한 경우에 항복점비가 증가할수록 최대변위비는 감소하다가 최소값을 나타내고 증가하는 것으로 나타났다. 강성비가 0.5이상인 경우 최대변위비가 1이하가 되는 항복점비가 존재하며, 이는 비탄성 내풍설계시 비탄성 거동을 허용하더라도 탄성설계된 건물보다 최대 변형이 감소함을 나타낸다.

• Steel and Composite Structures
• /
• 제37권2호
• /
• pp.175-191
• /
• 2020

In this article, for the first time, the seismic behavior of elliptic-braced moment resisting frame (ELBRF) is assessed through a laboratory program and numerical analyses of FEM specifically focused on the development of global- and local-type failure mechanisms. The ELBRF as a new lateral braced system, when installed in the middle bay of the frames in the facade of a building, not only causes no problem to the opening space of the facade, but also improves the structural behavior. Quantitative and qualitative investigations were pursued to find out how elliptic braces would affect the failure mechanism of ELBRF structures exposed to seismic action as a nonlinear process. To this aim, an experimental test of a ½ scale single-story single-bay ELBRF specimen under cyclic quasi-static loading was run and the results were compared with those for X-bracing, knee-bracing, K-bracing, and diamond-bracing systems in a story base model. Nonlinear FEM analyses were carried out to evaluate failure mechanism, yield order of components, distribution of plasticity, degradation of structural nonlinear stiffness, distribution of internal forces, and energy dissipation capacity. The test results indicated that the yield of elliptic braces would delay the failure mode of adjacent elliptic columns and thus, help tolerate a significant nonlinear deformation to the point of ultimate failure. Symmetrical behavior, high energy absorption, appropriate stiffness, and high ductility in comparison with the conventional systems are some of the advantages of the proposed system.

• Smart Structures and Systems
• /
• 제4권3호
• /
• pp.291-304
• /
• 2008

Piezoelectric materials have been widely used in ultrasonic nondestructive testing (NDT). PZT ceramics can be used to receive and generate surface acoustic waves. It is a common application to attach PZT transducers to the surface of structures for detecting cracks in nondestructive testing. However, not until recently have piezoelectric polymers attracted more and more attention to be the material for interdigitated (IDT) surface and guided-wave transducers. In this paper, an interdigitated gold-on-polyvinylidene fluoride (PVDF) transducer for actuating and sensing Lamb waves has been introduced. A specific etching technology is employed for making the surface electrodes into a certain finger pattern, the spacings of which yield different single mode responses of Lamb waves. Experiments have been performed on steel and carbon fiber composite plates. Results from PVDF IDT sensors have been compared with those from PZT transducers for verification.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 하계학술발표회
• /
• pp.88-89
• /
• 2003

현대 시대에 광통신 시스템은 안정적이고 높은 단일 모드를 갖는 광원을 필요로 한다. 이 조건을 만족하는 λ／4 phase shifted DFB는 높은 단일모드 생성을 보였으나 high spatial hole burning문제점을 가지고 있다. λ／4 phase shift를 사용하지 않은 dual-pitch grating DFB가 소개되었지만 제작상의 어려움을 가지고 있다. 또 다른 구조인 selection-free tapered stripe DFB lasers가 제안되었는데 제작이 간단하면서도 높은 단일모드 생성을 보였다. (중략)

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제10권3호
• /
• pp.284-288
• /
• 2005

Baker's yeast was disrupted in a 1.4-L stainless steel horizontal bead mill under a continuous recycle mode using 0.3 mm diameter zirconia beads as abrasive. A single pass in continuous mode bead mill operation liberates half of the maximally released protein. The maximum total protein release can only be achieved after passaging the cells 5 times through the disruption chamber. The degree of cell disruption was increased with the increase in feeding rate, but the total protein release was highest at the middle range of feeding rate (45 L/h). The total protein release was increased with an increase in biomass concentration from 10 to $50\%$(w/v). However, higher heat dissipation as a result of high viscosity of concentrated biomass led to the denaturation of labile protein such as glucose 6-phosphate dehydrogenase (G6PDH). As a result the highest specific activity of G6PDH was achieved at biomass concentration of $20\%$(ww/v). Generally, the degree of cell disruption and total protein released were increased with an increase in impeller tip speed, but the specific activity of G6PDH was decreased substantially at higher impeller tip speed (14 m/s). Both the degree of cell disruption and total protein release increased, as the bead loading increased from 75 to $85\% (v/v)$. Hence, in order to obtain a higher yield of labile protein such as G6PDH, the yeast cell should not be disrupted at biomass concentration and impeller tip speed higher than $20\%(w/v)$ and 10 m/s, respectively.

• 한국미생물·생명공학회지
• /
• 제16권3호
• /
• pp.187-192
• /
• 1988

Cholesterol로부터 미생물전환 방법에 의한 4-androstene-3,17-dione(AD)의 생성에 대해 연구를 수행했다. 발효액중에 cholesterol의 용해도를 증가시키기 위해 ethanol을 용매로 사용하였는데, ethanol 농도가 2%(v/v)까지는 세균성장이 크게 저해되지 않았다. 미생물전환은 pH를 7.0으로 조절하고, 초기대수 증식기에 cholesterol을 첨가했을 때 효율적으로 AD가 생성되었다. AD 생성을 높이기 위해 cholesterol 첨가방법을 여러 가지로 변환시켰다. 즉, 최종 cholesterol 농도를 0.1% 하여 ethanol에 녹여 간헐적으로 첨가했을 때 가장 높은 수율을 얻었다. Cholesterol을 세번(전체 3g/$\ell$) 첨가했을 때 최종 전환수율이 65%에 도달한 반면, 같은 양의 cholesterol (3g/$\ell$)을 한번에 넣었을 때 40%의 생성수율을 얻었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.549-552
• /
• 2004

The thesis describes the design of 12bit digital-to-analog converter (DAC) which shows the conversion rate of 500MHz and the power supply of 3.3V with 0.35${\mu}m$ CMOS 1-poly 4-metal process for advanced wireless transceiver of high speed and high resolution. The proposed DAC employes segmented structure which consists of 6bit MSB, 3bit mSB, 3bit LSB for area efficiency Also, using a optimized aspect ratio of process and new triple diagonal symmetric centroid sequence for high yield and high linearity. The proposed 12bit current mode DAC was employs new deglitch circuit for the decrement of the glitch energy. Simulation results show the conversion rate of 500MHz, and the power dissipation of 85mW at single 3.3V supply voltage. Both DNL and INL are found to be smaller than ${\pm}0.65LSB/{\pm}0.8LSB$.