• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.63-64
• /
• 2007

In this paper, an adaptive passivity based excitation and governor control scheme is proposed to enhance the transient stability of a single machine infinite bus power system with parametric uncertainties. We employ a state model where the frequency, the difference between active and mechanical power, and the difference between the squared terminal voltage and its reference are regarded as state variables. Using this state model, the proposed controller is obtained in two steps; firstly, a simple direct adaptive passivation controller is designed for the power system with parametric uncertainties; then a linear PI controller is applied to guarantee the stability of the closed loop system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.58-61
• /
• 1996

For a class of single-input single-output continuous-time nonlinear systems, a multilayer neural network-based controller that feedback-linearizes the system is presented. Control action is used to achieve tracking performance for a state-feedback linearizable but unknown nonlinear system. The multilayer neural network(NN) is used to approximate nonlinear continuous function to any desired degree of accuracy. The weight-update rule of multilayer neural network is derived to satisfy Lyapunov stability. It is shown that all the signals in the closed-loop system are uniformly bounded. Initialization of the network weights is straightforward.

• 전력전자학회논문지
• /
• 제20권2호
• /
• pp.182-192
• /
• 2015

This study develops a digital control scheme with power factor correction for a front-end converter in an electric vehicle battery charger. The front-end converter acts as the boost-type switching-mode rectifier. The converter assumes the two roles of the battery charger, which include power factor control and robust charging performance. The proposed control scheme consists of a charging control algorithm and a grid current control algorithm. The scheme aims to obtain unity input power factor and robust performance. Based on the linear average model of the converter, a constant-current constant-voltage charging control algorithm that passes through only one proportional-integral controller and a current feed-forward path is proposed. In the current control algorithm, we utilized a second band pass filter, a single-phase phase-locked loop technique, and a duty-ratio feed-forward term to control the grid current to be in phase with the grid voltage and achieve pure sinusoidal waveform. Simulations and experiments were conducted to verify the effectiveness of the proposed control scheme, both simulations and experiments.

• 한국동물생명공학회지
• /
• 제35권2호
• /
• pp.198-206
• /
• 2020

Food and agricultural production sector, especially livestock production is vital for Mongolia's economic and social development. Domestic sheep play key roles for Mongolians, providing food (meat, milk) and raw materials (wool, sheepskin), but genetic diversity, origin of sheep populations in Mongolia have not been well studied. Studies of population genetic diversity is important research field in conservation and restoration of animal breeds and genetic resources. Therefore, this study aimed to investigate genetic characteristics and estimate origin through the analysis of mitochondrial DNA control region D-loop and Cytochrome b of Mongolian indigenous sheep (Mongolian native, Orkhon and Altanbulag) and one Europe sheep (Suffolk). As a result of there were found, 220 SNPs (Single nucleotide polymorphism) in the D-loop region, 28 SNPs in the Cytochrome B region, furthermore, 77 Haplotypes. The nucleotide diversity was only found in D-loop region (n = 0.0184). Phylogenetic analysis showed that 3 (A, B, and C) of 5 haplogroups of sheep have been identified in our research. Haplogroup C was only found in Mongolian indigenous sheep. Haplogroup D and E were not observed. As a result of haplogroups, haplogroup A was dominant (n = 46 of 94 sheeps), followed by haplogroup B (n = 36) and haplogroup C (n = 12). Sequence analysis showed that T deletion, insertion and heteroplasmy in D-loop region occurred at a high rate in Mongolian indigenous sheep population (T insertion = 47, T deletion = 83). The heteroplasmy, which has never been found in Mongolian sheep, has been newly discovered in this study. As a result, the Mongolian sheep varieties, which mainly derived from Asia, were in hybridization with European sheep varieties.

• 한국태양에너지학회 논문집
• /
• 제37권3호
• /
• pp.47-59
• /
• 2017

As the global warming threats to humanity, renewable energy is considered the key solution to overcome the climate change. In this circumstance, distributed PV systems are being expanded significantly its market share in the renewable energy industry. The performance of inverter is the most important component at PV system and numerous researches are focusing on it. In order to improve the inverter, PV simulator is an essential device to experiment under various load and conditions. This paper proposes the PV Power-Hardware-In-Loop simulator (PHILS) with real-time processing converted electrical and mathematical models to improve computation speed. Single-diode PV model is used in MATLAB/SIMULINK for the PV PHILS to boosting computation speed and dynamic model accuracy. In addition, control algorithms for sub-components such as DC amplifier, measurement device and several interface functions are implemented in the model. The proposed PV PHILS is validated by means of experiments with commercial PV module parameters.

• 전력전자학회논문지
• /
• 제20권6호
• /
• pp.517-525
• /
• 2015

A grid connected inverter must be operated as the main electricity source under an isolated condition caused by the grid problem. Conventionally, the dual loop controller is used for the grid inverter, and the controller is used for control under the stand-alone mode. Generally, the PI(Proportional - Integral) controller is highly efficient under a synchronous reference frame, and stable control can be available. However, in this synchronous frame-based control, high-quality DSP is required because many sinusoidal calculations are necessary. When the PI control is conducted under a stationary frame, the controller constructions are made simple so that they work even with a low-price micro controller. However, given the characteristics of the PI controller, it should be designed with the phase of reference voltage considered. Otherwise, the phase delay of the output voltage can occur. Although the current controller also has a higher bandwidth than the voltage controller, distortion of the voltage is difficult to avoid only by the rapid response of the PI controller, as a sudden load change can occur in the nonlinear load. In this study, a new control method that solves the voltage controller bandwidth problem and rapidly copes with it even in the nonlinear load situation is proposed. The validity of the proposed method is proved by simulation and experimental results.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1109-1114
• /
• 2007

This paper presents the road simulator control technology for reproducing the road input signal to implement the real road data. The simulator consists of the hydraulic pump, servo valve, hydraulic actuator and its control equipment. The QFT is utilized to control the simulator effectively. The control system illustrates a tracking performance of the closed-loop controller with low order transfer function G(s) and pre-filter F(s) for a parametric uncertain model. A force controller is designed to communicate the control signal between simulator and digital controller. The efficacy of the QFT force controller is verified through the numerical simulation, in which combined dynamics and actuation of the hydraulic servo system are tested. The simulation results show that the proposed control technique works well under uncertain hydraulic plant system. The conventional software (Labview) is used to make up for the real controller in the real-time basis, and the experimental works show that the proposed algorithm works well for a single road simulator.

• 대한기계학회논문집A
• /
• 제31권11호
• /
• pp.1069-1076
• /
• 2007

This paper presents the road simulator control technology for reproducing the road input signal to implement the real road data. The simulator consists of the hydraulic pump, servo valve, hydraulic actuator and its control equipment. The QFT(Quantitative Feedback Theory) is utilized to control the simulator effectively. The control system illustrates a tracking performance of the closed-loop controller with low order transfer function G(s) and pre-filter F(s) for a parametric uncertain model. A force controller is designed to communicate the control signal between simulator and digital controller. Tracking specification is satisfied with upper and lower bound tolerances on the steep response of the system to the reference signal. The efficacy of the QFT force controller is verified through the numerical simulation, in which combined dynamics and actuation of the hydraulic servo system are tested. The simulation results show that the proposed control technique works well under uncertain hydraulic plant system. The conventional software (Labview) is used to make up for the real controller in the real-time basis, and the experimental works show that the proposed algorithm works well for a single road simulator.

• Smart Structures and Systems
• /
• 제1권3호
• /
• pp.235-256
• /
• 2005

The non-linear behaviour of electrorheological (ER) and magnetorheological (MR) dampers makes it difficult to design effective control strategies, and as a consequence a wide range of control systems have been proposed in the literature. These previous studies have not always compared the performance to equivalent passive systems, alternative control designs, or idealised active systems. As a result it is often impossible to compare the performance of different smart damper control strategies. This article provides some insight into the relative performance of two MR damper control strategies: on/off control and feedback linearisation. The performance of both strategies is benchmarked against ideal passive, semi-active and fully active damping. The study relies upon a previously developed model of an MR damper, which in this work is validated experimentally under closed-loop conditions with a broadband mechanical excitation. Two vibration isolation case studies are investigated: a single-degree-of-freedom mass-isolator, and a two-degree-of-freedom system that represents a vehicle suspension system. In both cases, a variety of broadband mechanical excitations are used and the results analysed in the frequency domain. It is shown that although on/off control is more straightforward to implement, its performance is worse than the feedback linearisation strategy, and can be extremely sensitive to the excitation conditions.

• 한국항공우주학회지
• /
• 제40권6호
• /
• pp.542-547
• /
• 2012

현재까지 대부분의 지상통제 소프트웨어는 단일 무인 항공기에 대한 자세, 위치, 상태의 수신 및 가시화와 항공기의 운용을 위한 조종 명령 및 임무 전송의 기능만 갖추고 있었다. 하지만 단일 무인기의 운용에서 다중 무인기의 운용으로 사용자의 요구가 확장됨에 따라 지상통제 소프트웨어도 다중 무인기의 운용을 위한 기능의 확장이 요구되고 있다. 본 연구에서는 다중 무인항공기의 운용을 위한 요구사항을 제시하고 이를 만족시키기 위한 지상통제 소프트웨어의 구조를 제안하였다. 우선, 제시된 상위 요구 성능을 분석하여 그에 따른 전체 구조를 정의하고, 이를 다시 세부 요구사항으로 설정하여 세부구조를 설계하였다. 마지막으로 PILS 환경에서 구성된 지상통제 소프트웨어의 기능을 검증하였다.